lkml.org 
[lkml]   [2008]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjectlibata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI
Date

Hi all,

When running smartctl to get the attributes readout libata seems to get
really confused on my system. After a timeout it recovers without apparent
ill-effect, but the reported values are complete rubbish. Unfortunately I don't
remember if this is a regression or it was always like this..

I have attached some data below, but if more is needed just shout!

Regards,

Tvrtko

root@sol:~# uname -a
Linux sol 2.6.24.3 #4 SMP PREEMPT Sat Mar 8 12:57:56 GMT 2008 x86_64 GNU/Linux

root@sol:~# smartctl -A /dev/sda
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 17018
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
255 Unknown_Attribute 0x373f 200 016 063 Pre-fail Always In_the_past 69269232549888
45 Unknown_Attribute 0x4344 087 082 068 Old_age Offline - 61779704492097
51 Unknown_Attribute 0x0039 000 000 057 Pre-fail Offline FAILING_NOW 52987850404480
66 Unknown_Attribute 0x3231 048 068 049 Pre-fail Offline FAILING_NOW 55350388793431
48 Unknown_Attribute 0x4130 065 083 048 Old_age Offline - 71675860037707
32 Unknown_Attribute 0x2030 032 032 048 Old_age Offline FAILING_NOW 35322350018592
32 Unknown_Attribute 0x2020 032 032 032 Old_age Offline FAILING_NOW 550026354720
16 Unknown_Attribute 0x3f00 000 016 000 Old_age Offline FAILING_NOW 280379760114684
255 Unknown_Attribute 0x000f 000 007 015 Pre-fail Always FAILING_NOW 131943408599808
120 Unknown_Attribute 0x7800 000 000 000 Old_age Offline FAILING_NOW 0
64 Unknown_Attribute 0xfe00 001 000 000 Old_age Offline In_the_past 39030002838272
104 Unknown_Attribute 0x4174 188 035 116 Old_age Offline In_the_past 48379254046529
225 Load_Cycle_Count 0x484e 000 085 078 Old_age Always FAILING_NOW 86
144 Unknown_Attribute 0x0016 000 000 022 Old_age Always FAILING_NOW 0



[ 7846.128079] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 7846.128086] ata2.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0
[ 7846.128087] res 40/00:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7846.128090] ata2.00: status: { DRDY }
[ 7846.128096] ata2: hard resetting link
[ 7846.735912] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7846.760523] ata2.00: configured for UDMA/133
[ 7846.760530] ata2: EH complete
[ 7846.760546] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 7846.760556] sd 1:0:0:0: [sda] Write Protect is off
[ 7846.760558] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7846.760571] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7852.748405] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 7852.748412] ata2.00: cmd b0/d1:01:01:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[ 7852.748413] res 40/00:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7852.748416] ata2.00: status: { DRDY }
[ 7852.748421] ata2: hard resetting link
[ 7853.356244] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7853.378276] ata2.00: configured for UDMA/133
[ 7853.378284] ata2: EH complete
[ 7853.378416] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 7853.378519] sd 1:0:0:0: [sda] Write Protect is off
[ 7853.378521] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7853.378761] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

00:0e.0 SATA controller: nVidia Corporation Unknown device 07f4 (rev a2) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Unknown device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 316
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at e5104000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] #12 [0010]
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
Address: 00000000fee0100c Data: 4181

root@sol:~# lsscsi
[1:0:0:0] disk ATA WDC WD3200AAKS-0 12.0 /dev/sda
[2:0:0:0] cd/dvd TSSTcorp CDDVDW SH-S203N SB01 /dev/scd0


root@sol:~# lsmod | grep -e "a[th][ac]"
ahci 27524 8
ata_generic 6404 0
libata 152048 2 ahci,ata_generic
scsi_mod 152752 5 firewire_sbp2,sg,sr_mod,sd_mod,libata





\
 
 \ /
  Last update: 2008-04-09 22:33    [W:0.144 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site