Messages in this thread | | | Date | Mon, 28 Apr 2008 11:46:44 -0400 (EDT) | From | Gerhard Mack <> | Subject | Re: [2.6.25] compat VDSO option not disabling |
| |
On Sat, 26 Apr 2008, Jeremy Fitzhardinge wrote: > Gerhard Mack wrote: > > I havn't enabled compat VDSO at the kernel command line or otherwise. > > Something broke with this option. > > Yes, you might be on to something. I think I've been seeing that message when > I wouldn't expect to. I'll double-check. Could you send your complete dmesg > output? > Of course
Linux version 2.6.25 (root@fd) (gcc version 4.2.3 (Debian 4.2.3-3)) #3 PREEMPT Thu Apr 24 13:07:50 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable) BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 511MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 1024 bytes. Entering add_active_range(0, 0, 131042) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131042 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 131042 On node 0 totalpages: 131042 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125955 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000FDE50, 0014 (r0 DELL ) ACPI: RSDT 000FDE64, 0028 (r1 DELL CPi R 27D40107 ASL 61) ACPI: FACP 000FDE90, 0074 (r1 DELL CPi R 27D40107 ASL 61) ACPI: DSDT FFFE4000, 314E (r1 INT430 SYSFexxx 1001 MSFT 100000E) ACPI: FACS 1FFFF800, 0040 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 30000000 (gap: 20000000:deda0000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130019 Kernel command line: root=/dev/sda3 ro Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (01402000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1196.541 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514436k/524168k available (3019k kernel code, 9232k reserved, 1134k data, 188k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB) vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB) lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB) .init : 0xc0512000 - 0xc0541000 ( 188 kB) .data : 0xc03f2d3a - 0xc050e90c (1134 kB) .text : 0xc0100000 - 0xc03f2d3a (3019 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 2395.98 BogoMIPS (lpj=1197992) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz stepping 04 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0800) net_namespace: 536 bytes NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: Power Resource [PADA] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered 00:04: mem resource (0xfa000000-0xfbffffff) overlaps 0000:00:1e.0 BAR 8 (0xf4000000-0xfbffffff), disabling pnp: PnP ACPI: found 17 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x805 has been reserved system 00:02: ioport range 0x808-0x80f has been reserved system 00:03: ioport range 0x806-0x807 has been reserved system 00:03: ioport range 0x810-0x85f has been reserved system 00:03: ioport range 0x860-0x87f has been reserved system 00:03: ioport range 0x880-0x8bf has been reserved system 00:03: ioport range 0x8c0-0x8df has been reserved system 00:03: ioport range 0x8e0-0x8ff has been reserved system 00:04: ioport range 0xf000-0xf0fe has been reserved system 00:04: ioport range 0xf100-0xf1fe has been reserved system 00:04: ioport range 0xf200-0xf2fe has been reserved system 00:04: ioport range 0xf400-0xf4fe has been reserved system 00:04: ioport range 0xf500-0xf5fe has been reserved system 00:04: ioport range 0xf600-0xf6fe has been reserved system 00:04: ioport range 0xf800-0xf8fe has been reserved system 00:04: ioport range 0xf900-0xf9fe has been reserved system 00:04: ioport range 0xfa00-0xfafe has been reserved system 00:04: ioport range 0xfc00-0xfcfe has been reserved system 00:04: ioport range 0xfd00-0xfdfe has been reserved system 00:04: ioport range 0xfe00-0xfefe has been reserved system 00:09: ioport range 0x900-0x91f has been reserved system 00:09: ioport range 0x3f0-0x3f1 has been reserved system 00:0f: ioport range 0xbf40-0xbf5f has been reserved system 00:10: iomem range 0xfebffc00-0xfebfffff has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: 0xfc000000-0xfdffffff PREFETCH window: 0x00000000d8000000-0x00000000e7ffffff PCI: Bus 3, cardbus bridge: 0000:02:01.0 IO window: 0x0000e000-0x0000e0ff IO window: 0x0000e400-0x0000e4ff PREFETCH window: 0x30000000-0x33ffffff MEM window: 0xf4000000-0xf7ffffff PCI: Bus 7, cardbus bridge: 0000:02:01.1 IO window: 0x0000e800-0x0000e8ff IO window: 0x00001000-0x000010ff PREFETCH window: 0x34000000-0x37ffffff MEM window: 0x3c000000-0x3fffffff PCI: Bridge: 0000:00:1e.0 IO window: e000-ffff MEM window: 0xf4000000-0xfbffffff PREFETCH window: 0x0000000030000000-0x0000000039ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:02:01.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:02:01.1 (0000 -> 0003) ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) Switched to high resolution mode on CPU 0 ACPI: Battery Slot [BAT1] (battery present) input: Lid Switch as /class/input/input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SBTN] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM] (28 C) Non-volatile memory driver v1.2 Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org) Intel 82802 RNG detected Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:1f.6 disabled loop: module loaded ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. 0000:02:00.0: 3Com PCI 3c905C Tornado at e0816c00. ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ath5k_pci 0000:02:03.0: registered as 'phy0' phy0: Selected rate control algorithm 'pid' ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) ath5k phy0: RF5112A multiband radio found (0x36) Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 ata1.00: ATA-6: TOSHIBA MK8025GAS, KA020U, max UDMA/100 ata1.00: 156301488 sectors, multi 8: LBA ata1.01: ATAPI: MATSHITADVD-RAM UJ-820S, 1.70, max UDMA/33 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8025GA KA02 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-820S 1.70 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sr 0:0:1:0: Attached scsi generic sg1 type 5 Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d5] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d5] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC). ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 Marking TSC unstable due to: TSC halts in idle. input: DualPoint Stick as /class/input/input4 input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input5 intel8x0_measure_ac97_clock: measured 50259 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801CA-ICH3 with CS4205 at irq 5 Netfilter messages via NETLINK v0.30. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI Shortcut mode registered taskstats version 1 rtc_cmos 00:07: setting system clock to 2008-04-28 15:31:40 UTC (1209396700) UDF-fs: No VRS found XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 188k freed dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) udev: renamed network interface wlan0 to ath0 input: Video Bus as /class/input/input6 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k eth0: setting full-duplex. eth0: no IPv6 routers present warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) spurious 8259A interrupt: IRQ7.
-- Gerhard Mack
gmack@innerfire.net
<>< As a computer I find your faith in technology amusing.
| |