lkml.org 
[lkml]   [2008]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc
From
Date

On Wed, 2008-04-02 at 12:38 +0530, Kamalesh Babulal wrote:
> Andrew Morton wrote:
> > On Wed, 02 Apr 2008 11:55:36 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> >
> >> Hi Andrew,
> >>
> >> The 2.6.25-rc8-mm1 kernel panic's while bootup on the power machine(s).
> >>
> >> [ 0.000000] ------------[ cut here ]------------
> >> [ 0.000000] kernel BUG at arch/powerpc/mm/init_64.c:240!
> >> [ 0.000000] Oops: Exception in kernel mode, sig: 5 [#1]
> >> [ 0.000000] SMP NR_CPUS=32 NUMA PowerMac
> >> [ 0.000000] Modules linked in:
> >> [ 0.000000] NIP: c0000000003d1dcc LR: c0000000003d1dc4 CTR: c00000000002b6ac
> >> [ 0.000000] REGS: c00000000049b960 TRAP: 0700 Not tainted (2.6.25-rc8-mm1-autokern1)
> >> [ 0.000000] MSR: 9000000000021032 <ME,IR,DR> CR: 44000088 XER: 20000000
> >> [ 0.000000] TASK = c0000000003f9c90[0] 'swapper' THREAD: c000000000498000 CPU: 0
> >> [ 0.000000] GPR00: c0000000003d1dc4 c00000000049bbe0 c0000000004989d0 0000000000000001
> >> [ 0.000000] GPR04: d59aca40f0000000 000000000b000000 0000000000000010 0000000000000000
> >> [ 0.000000] GPR08: 0000000000000004 0000000000000001 c00000027e520800 c0000000004bf0f0
> >> [ 0.000000] GPR12: c0000000004bf020 c0000000003fa900 0000000000000000 0000000000000000
> >> [ 0.000000] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> >> [ 0.000000] GPR20: 0000000000000000 0000000000000000 0000000000000000 4000000001400000
> >> [ 0.000000] GPR24: 00000000017d64b0 c0000000003d6250 0000000000000000 c000000000504000
> >> [ 0.000000] GPR28: 0000000000000000 cf000000001f8000 0000000001000000 cf00000000000000
> >> [ 0.000000] NIP [c0000000003d1dcc] .vmemmap_populate+0xb8/0xf4
> >> [ 0.000000] LR [c0000000003d1dc4] .vmemmap_populate+0xb0/0xf4
> >> [ 0.000000] Call Trace:
> >> [ 0.000000] [c00000000049bbe0] [c0000000003d1dc4] .vmemmap_populate+0xb0/0xf4 (unreliable)
> >> [ 0.000000] [c00000000049bc70] [c0000000003d2ee8] .sparse_mem_map_populate+0x38/0x60
> >> [ 0.000000] [c00000000049bd00] [c0000000003c242c] .sparse_early_mem_map_alloc+0x54/0x94
> >> [ 0.000000] [c00000000049bd90] [c0000000003c250c] .sparse_init+0xa0/0x20c
> >> [ 0.000000] [c00000000049be50] [c0000000003ab7d0] .setup_arch+0x1ac/0x218
> >> [ 0.000000] [c00000000049bee0] [c0000000003a36ac] .start_kernel+0xe0/0x3fc
> >> [ 0.000000] [c00000000049bf90] [c000000000008594] .start_here_common+0x54/0xc0
> >> [ 0.000000] Instruction dump:
> >> [ 0.000000] 7fe3fb78 7ca02a14 4082000c 3860fff4 4800003c e92289c8 e96289c0 e9090002
> >> [ 0.000000] e8eb0002 4bc575cd 60000000 78630fe0 <0b030000> 7ffff214 7fbfe840 7fe3fb78
> >> [ 0.000000] ---[ end trace 31fd0ba7d8756001 ]---
> >> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
> >>
> >
> > int __meminit vmemmap_populate(struct page *start_page,
> > unsigned long nr_pages, int node)
> > {
> > unsigned long mode_rw;
> > unsigned long start = (unsigned long)start_page;
> > unsigned long end = (unsigned long)(start_page + nr_pages);
> > unsigned long page_size = 1 << mmu_psize_defs[mmu_linear_psize].shift;
> >
> > mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
> >
> > /* Align to the page size of the linear mapping. */
> > start = _ALIGN_DOWN(start, page_size);
> >
> > for (; start < end; start += page_size) {
> > int mapped;
> > void *p;
> >
> > if (vmemmap_populated(start, page_size))
> > continue;
> >
> > p = vmemmap_alloc_block(page_size, node);
> > if (!p)
> > return -ENOMEM;
> >
> > pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
> > start, p, __pa(p));
> >
> > mapped = htab_bolt_mapping(start, start + page_size,
> > __pa(p), mode_rw, mmu_linear_psize,
> > mmu_kernel_ssize);
> > =====> BUG_ON(mapped < 0);
> > }
> >
> > return 0;
> > }
> >
> > Beats me. pseries? Badari has been diddling with the bolted memory code
> > in git-powerpc...
>
> One of the machines is the Power5 and another is PowerMac G5, on which the
> same kernel panic is seen.

Can you enable DEBUG_LOW in arch/powerpc/platforms/pseries/lpar.c, that
should show what's happening in hpte_insert().

cheers

--
Michael Ellerman
OzLabs, IBM Australia Development Lab

wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)

We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2008-04-02 09:21    [W:0.312 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site