lkml.org 
[lkml]   [2008]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] lxfb/gxfb: fix up __init and __initdata fields for modedb-related stuff
On Mon, 14 Apr 2008 22:39:15 -0400
Andres Salomon <dilinger@queued.net> wrote:

> On Mon, 14 Apr 2008 18:21:12 -0700
> Andrew Morton <akpm@linux-foundation.org> wrote:
>
> > On Mon, 14 Apr 2008 03:53:02 -0400 Andres Salomon <dilinger@queued.net> wrote:
> >
> > >
> > > Since there's no way to autodetect panel modes, we're forced to hardcode
> > > them in the driver and add a big fat #ifdef. The OLPC DCON needs a
> > > specific mode line (at 1200x900). This adds it to both gxfb and lxfb.
> > >
> > > ...
> > >
> > > +static const struct fb_videomode gx_dcon_modedb[] __initdata = {
> > > +const struct fb_videomode olpc_dcon_modedb[] __initdata = {
>
> Hm, that one should be static as well. Will fix in the following patch.
>
> >
> > include/linux/init.h:38 points out that `const' and `__initdata' should
> > not be mixed.
> >
> > I forget which architecture/compiler versions explode when we do this. But
> > it's not x86, iirc.
> >
> > Still, it's poor form and, err, I don't immediately recall which tag we
> > _should_ use, and the comments in there are unhelpful. It might be
> > __initconst, but that has exactly zero users. Help.
> >
>
>
> My guess would be __initconst or __devinitconst? That would put it in
> .{init,devinit}.rodata rather than .{init,devinit}.data.
>
> Alternatively, I could just remove the 'const'.
>
> Documentation for this stuff would be awesome. :/
>
>
>

Hm, no answer on that. Might as well just remove the const. Can you
please add the patch below?







A couple things were wrong here:
- a struct in lxfb should've been static.
- 'const' and '__initdata' don't mix, so the consts have been dropped
- get_modedb() in both drivers should've been marked w/ __init

Signed-off-by: Andres Salomon <dilinger@debian.org>
---
drivers/video/geode/gxfb_core.c | 8 ++++----
drivers/video/geode/lxfb_core.c | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 3e76e06..6b341b5 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -41,7 +41,7 @@ static int vram;
static int vt_switch;

/* Modes relevant to the GX (taken from modedb.c) */
-static const struct fb_videomode gx_modedb[] __initdata = {
+static struct fb_videomode gx_modedb[] __initdata = {
/* 640x480-60 VESA */
{ NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
@@ -111,14 +111,14 @@ static const struct fb_videomode gx_modedb[] __initdata = {
#ifdef CONFIG_OLPC
#include <asm/olpc.h>

-static const struct fb_videomode gx_dcon_modedb[] __initdata = {
+static struct fb_videomode gx_dcon_modedb[] __initdata = {
/* The only mode the DCON has is 1200x900 */
{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED, 0 }
};

-static void get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
{
if (olpc_has_dcon()) {
*modedb = (struct fb_videomode *) gx_dcon_modedb;
@@ -130,7 +130,7 @@ static void get_modedb(struct fb_videomode **modedb, unsigned int *size)
}

#else
-static void get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
{
*modedb = (struct fb_videomode *) gx_modedb;
*size = ARRAY_SIZE(gx_modedb);
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c
index 28fa3c4..ae69feb 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/geode/lxfb_core.c
@@ -36,7 +36,7 @@ static int vt_switch;
* we try to make it something sane - 640x480-60 is sane
*/

-static const struct fb_videomode geode_modedb[] __initdata = {
+static struct fb_videomode geode_modedb[] __initdata = {
/* 640x480-60 */
{ NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
@@ -220,14 +220,14 @@ static const struct fb_videomode geode_modedb[] __initdata = {
#ifdef CONFIG_OLPC
#include <asm/olpc.h>

-const struct fb_videomode olpc_dcon_modedb[] __initdata = {
+static struct fb_videomode olpc_dcon_modedb[] __initdata = {
/* The only mode the DCON has is 1200x900 */
{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED, 0 }
};

-static void get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
{
if (olpc_has_dcon()) {
*modedb = (struct fb_videomode *) olpc_dcon_modedb;
@@ -239,7 +239,7 @@ static void get_modedb(struct fb_videomode **modedb, unsigned int *size)
}

#else
-static void get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
{
*modedb = (struct fb_videomode *) geode_modedb;
*size = ARRAY_SIZE(geode_modedb);
--
1.5.4.4


--
Need a kernel or Debian developer? Contact me, I'm looking for contracts.


\
 
 \ /
  Last update: 2008-04-18 06:09    [W:0.040 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site