lkml.org 
[lkml]   [2008]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: apic doesn't work with 32bit kernel (fine with 64bit) [asus m2n-mx se+]
    Date
    Am Sonntag 13 April 2008 01:15:51 schrieb Yinghai Lu:
    > On Sat, Apr 12, 2008 at 12:20 PM, Christoph Pfister
    >
    > <christophpfister@gmail.com> wrote:
    > > Hi,
    > >
    > > Using a new motherboard, I came across a kernel panic (dmesg using
    > > 2.6.25-rc9 [x86_32] transcribed from screenshot attached; also dmesg when
    > > using "apic=debug").
    > > The system works nearly fine when using "noapic" (setting rtc doesn't
    > > work).
    > >
    > > Everything (including apic and rtc) works like a charm when I use the
    > > x86_64 version with (nearly) the same kernel config (dmesg attached as
    > > well).
    >
    > how about booting 64 bit apic=debug?

    Attached.

    > wonder if using kexec to load 32bit kernel from 64 bit kernel help.

    What should it help? Btw, grabbed a good old RS232 cable to get more than 25
    lines of dmesg :) - attached as well.

    > YH

    Christoph
    Initializing cgroup subsys cpuset
    Linux version 2.6.25-rc9 (lxuser@pdc3) (gcc version 4.2.3 (Debian 4.2.3-3)) #1 SMP Sun Apr 13 13:32:20 CEST 2008
    Command line: root=/dev/hda1 vga=791 apic=debug
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
    BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
    BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
    BIOS-e820: 000000003ffe0000 - 000000003ffee000 (reserved)
    BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Entering add_active_range(0, 0, 159) 0 entries of 3200 used
    Entering add_active_range(0, 256, 262064) 1 entries of 3200 used
    end_pfn_map = 1048576
    DMI present.
    ACPI: RSDP 000FB770, 0014 (r0 ACPIAM)
    ACPI: RSDT 3FFB0000, 0038 (r1 A_M_I_ OEMRSDT 12000704 MSFT 97)
    ACPI: FACP 3FFB0200, 0084 (r2 A_M_I_ OEMFACP 12000704 MSFT 97)
    ACPI: DSDT 3FFB05D0, 65BA (r1 A0865 A0865000 0 INTL 20051117)
    ACPI: FACS 3FFBE000, 0040
    ACPI: APIC 3FFB0390, 0080 (r1 A_M_I_ OEMAPIC 12000704 MSFT 97)
    ACPI: MCFG 3FFB0410, 003C (r1 A_M_I_ OEMMCFG 12000704 MSFT 97)
    ACPI: OEMB 3FFBE040, 0060 (r1 A_M_I_ AMI_OEM 12000704 MSFT 97)
    ACPI: HPET 3FFB6B90, 0038 (r1 A_M_I_ OEMHPET0 12000704 MSFT 97)
    Scanning NUMA topology in Northbridge 24
    No NUMA configuration found
    Faking a node at 0000000000000000-000000003ffb0000
    Entering add_active_range(0, 0, 159) 0 entries of 3200 used
    Entering add_active_range(0, 256, 262064) 1 entries of 3200 used
    Bootmem setup node 0 0000000000000000-000000003ffb0000
    NODE_DATA [000000000000b000 - 0000000000011fff]
    bootmap [0000000000012000 - 0000000000019ff7] pages 8
    early res: 0 [0-fff] BIOS data page
    early res: 1 [6000-7fff] SMP_TRAMPOLINE
    early res: 2 [200000-62ebf7] TEXT DATA BSS
    early res: 3 [37b61000-37fef543] RAMDISK
    early res: 4 [9fc00-a0bff] EBDA
    early res: 5 [8000-afff] PGTABLE
    [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
    [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
    [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
    [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
    [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
    [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
    [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
    Zone PFN ranges:
    DMA 0 -> 4096
    DMA32 4096 -> 1048576
    Normal 1048576 -> 1048576
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0 -> 159
    0: 256 -> 262064
    On node 0 totalpages: 261967
    DMA zone: 56 pages used for memmap
    DMA zone: 1079 pages reserved
    DMA zone: 2864 pages, LIFO batch:0
    DMA32 zone: 3526 pages used for memmap
    DMA32 zone: 254442 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    Detected use of extended apic ids on hypertransport bus
    ACPI: PM-Timer IO Port: 0x508
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 (Bootup-CPU)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ0 used by override.
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x10de8201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    mapped APIC to ffffffffff5fb000 ( fee00000)
    mapped IOAPIC to ffffffffff5fa000 (00000000fec00000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    PERCPU: Allocating 34712 bytes of per cpu data
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 257306
    Policy zone: DMA32
    Kernel command line: root=/dev/hda1 vga=791 apic=debug
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    TSC calibrated against PM_TIMER
    Marking TSC unstable due to TSCs unsynchronized
    time.c: Detected 2109.592 MHz processor.
    spurious 8259A interrupt: IRQ7.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Checking aperture...
    Node 0: aperture @ 2040000000 size 32 MB
    Aperture beyond 4GB. Ignoring.
    No AGP bridge found
    Memory: 1024256k/1048256k available (2176k kernel code, 23612k reserved, 1011k data, 328k init)
    CPA: page pool initialized 1 of 1 pages preallocated
    hpet clockevent registered
    Calibrating delay using timer specific routine.. 4223.37 BogoMIPS (lpj=8446742)
    Security Framework initialized
    SELinux: Disabled at boot.
    Capability LSM initialized
    Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 0/0 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    ACPI: Core revision 20070126
    enabled ExtINT on CPU#0
    ENABLING IO-APIC IRQs
    init IO_APIC IRQs
    IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-2 -> 0x32 -> IRQ 2 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
    IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
    IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
    IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
    ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    Using local APIC timer interrupts.
    APIC timer calibration result 12557129
    Detected 12.557 MHz APIC timer.
    Booting processor 1/2 APIC 0x1
    Initializing CPU#1
    masked ExtINT on CPU#1
    Calibrating delay using timer specific routine.. 4219.24 BogoMIPS (lpj=8438488)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 1/1 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02
    Brought up 2 CPUs
    net_namespace: 1016 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: Error attaching device data
    ACPI: Error attaching device data
    ACPI: Error attaching device data
    ACPI: Error attaching device data
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:04.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
    ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
    ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 60, should be 53 [20070126]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
    pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
    pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
    pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
    IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
    pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
    00:07: calling quirk 0xffffffff80354d0a: quirk_system_pci_resources+0x0/0x17c()
    pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
    00:09: calling quirk 0xffffffff80354d0a: quirk_system_pci_resources+0x0/0x17c()
    pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
    pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    00:0b: calling quirk 0xffffffff80354d0a: quirk_system_pci_resources+0x0/0x17c()
    pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
    pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
    00:0d: calling quirk 0xffffffff80354d0a: quirk_system_pci_resources+0x0/0x17c()
    pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    00:0e: calling quirk 0xffffffff80354d0a: quirk_system_pci_resources+0x0/0x17c()
    pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    number of MP IRQ sources: 16.
    number of IO-APIC #2 registers: 24.
    testing the IO APIC.......................

    IO APIC #2......
    .... register #00: 02000000
    ....... : physical APIC id: 02
    .... register #01: 00170011
    ....... : max redirection entries: 0017
    ....... : PRQ implemented: 0
    ....... : IO APIC version: 0011
    .... register #02: 02000000
    ....... : arbitration: 02
    .... IRQ redirection table:
    NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
    00 003 0 0 0 0 0 1 1 30
    01 003 0 0 0 0 0 1 1 31
    02 003 1 0 0 0 0 1 1 32
    03 003 0 0 0 0 0 1 1 33
    04 003 0 0 0 0 0 1 1 34
    05 003 1 0 0 0 0 1 1 35
    06 003 0 0 0 0 0 1 1 36
    07 003 0 0 0 0 0 1 1 37
    08 003 0 0 0 0 0 1 1 38
    09 003 0 1 0 0 0 1 1 39
    0a 003 1 0 0 0 0 1 1 3A
    0b 003 1 0 0 0 0 1 1 3B
    0c 003 0 0 0 0 0 1 1 3C
    0d 003 0 0 0 0 0 1 1 3D
    0e 003 0 0 0 0 0 1 1 3E
    0f 003 0 0 0 0 0 1 1 3F
    10 000 1 0 0 0 0 0 0 00
    11 000 1 0 0 0 0 0 0 00
    12 000 1 0 0 0 0 0 0 00
    13 000 1 0 0 0 0 0 0 00
    14 000 1 0 0 0 0 0 0 00
    15 000 1 0 0 0 0 0 0 00
    16 000 1 0 0 0 0 0 0 00
    17 000 1 0 0 0 0 0 0 00
    IRQ to pin mappings:
    IRQ0 -> 0:0
    IRQ1 -> 0:1
    IRQ2 -> 0:2
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ9 -> 0:9
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    .................................... done.
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
    hpet0: 3 32-bit timers, 25000000 Hz
    ACPI: RTC can wake from S4
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    pnp: the driver 'system' has been registered
    system 00:07: ioport range 0xa30-0xa37 has been reserved
    system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    system 00:07: ioport range 0x800-0x80f has been reserved
    system 00:07: ioport range 0x500-0x57f has been reserved
    system 00:07: ioport range 0x580-0x5ff has been reserved
    system 00:07: ioport range 0x800-0x87f could not be reserved
    system 00:07: ioport range 0x880-0x8ff has been reserved
    system 00:07: ioport range 0xd00-0xd7f has been reserved
    system 00:07: ioport range 0xd80-0xdff has been reserved
    system 00:07: ioport range 0x900-0x97f has been reserved
    system 00:07: ioport range 0x980-0x9ff has been reserved
    system 00:07: ioport range 0x2000-0x207f has been reserved
    system 00:07: ioport range 0x2080-0x20ff has been reserved
    system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
    system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
    system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
    system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
    system 00:07: iomem range 0xff300000-0xff3fffff has been reserved
    system 00:07: driver attached
    system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
    system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
    system 00:09: iomem range 0x0-0x0 could not be reserved
    system 00:09: driver attached
    system 00:0b: ioport range 0x230-0x23f has been reserved
    system 00:0b: ioport range 0x290-0x29f has been reserved
    system 00:0b: ioport range 0xa00-0xa0f has been reserved
    system 00:0b: ioport range 0xa10-0xa1f has been reserved
    system 00:0b: driver attached
    system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0d: driver attached
    system 00:0e: iomem range 0x0-0x9ffff could not be reserved
    system 00:0e: iomem range 0xc0000-0xcffff has been reserved
    system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
    system 00:0e: iomem range 0xff700000-0xffffffff could not be reserved
    system 00:0e: driver attached
    PCI: Bridge: 0000:00:04.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:09.0
    IO window: e000-efff
    MEM window: 0xdc000000-0xdfffffff
    PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
    PCI: Bridge: 0000:00:0b.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    PCI: Setting latency timer of device 0000:00:09.0 to 64
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 4665k freed
    audit: initializing netlink socket (disabled)
    type=2000 audit(1208088239.700:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Enabling HT MSI Mapping
    pci 0000:00:04.0: Enabling HT MSI Mapping
    pci 0000:00:05.0: Enabling HT MSI Mapping
    pci 0000:00:07.0: Enabling HT MSI Mapping
    pci 0000:00:08.0: Enabling HT MSI Mapping
    pci 0000:00:09.0: Enabling HT MSI Mapping
    pci 0000:00:0b.0: Enabling HT MSI Mapping
    pci 0000:00:0c.0: Enabling HT MSI Mapping
    pci 0000:02:00.0: Boot video device
    PCI: Setting latency timer of device 0000:00:09.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:09.0:pcie00]
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0b.0:pcie00]
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0c.0:pcie00]
    vesafb: framebuffer at 0xdd000000, mapped to 0xffffc20000500000, using 3072k, total 14336k
    vesafb: mode is 1024x768x16, linelength=2048, pages=1
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Real Time Clock Driver v1.12ac
    hpet_resources: 0xfed00000 is busy
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    pnp: the driver 'serial' has been registered
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 00:0c: driver attached
    brd: module loaded
    input: Macintosh mouse button emulation as /class/input/input0
    pnp: the driver 'i8042 kbd' has been registered
    i8042 kbd 00:0a: driver attached
    pnp: the driver 'i8042 aux' has been registered
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    registered taskstats version 1
    Freeing unused kernel memory: 328k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: ACPI0007:01 is registered as cooling_device1
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
    IOAPIC[0]: Set routing entry (2-23 -> 0x61 -> IRQ 23 Mode:1 Active:1)
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:02.0: irq 23, io mem 0xdbfff000
    No dock devices found.
    SCSI subsystem initialized
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    Floppy drive(s): fd0 is 1.44M
    libata version 3.00 loaded.
    FDC 0 is a post-1991 82077
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
    IOAPIC[0]: Set routing entry (2-22 -> 0x69 -> IRQ 22 Mode:1 Active:1)
    ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:07.0 to 64
    usb 1-1: new low speed USB device using ohci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1e:8c:d8:df:75
    forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
    sata_nv 0000:00:08.0: version 3.5
    ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
    IOAPIC[0]: Set routing entry (2-21 -> 0x71 -> IRQ 21 Mode:1 Active:1)
    ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    scsi0 : sata_nv
    scsi1 : sata_nv
    ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
    ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
    usbcore: registered new interface driver hiddev
    input: Logitech USB Trackball as /class/input/input2
    input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:02.0-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    ata1: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
    IOAPIC[0]: Set routing entry (2-20 -> 0x79 -> IRQ 20 Mode:1 Active:1)
    ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:02.1: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.1
    ehci_hcd 0000:00:02.1: irq 20, io mem 0xdbffec00
    usb 1-1: USB disconnect, address 2
    Uniform Multi-Platform E-IDE driver
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 8 ports detected
    NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
    NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot 0000:00:06.0
    NFORCE-MCP61: not 100% native mode: will probe irqs later
    NFORCE-MCP61: IDE port disabled
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    Probing IDE interface ide0...
    hda: HDS722512VLAT20, ATA DISK drive
    usb 1-1: new low speed USB device using ohci_hcd and address 3
    usb 1-1: configuration #1 chosen from 1 choice
    input: Logitech USB Trackball as /class/input/input3
    hdb: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
    input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:02.0-1
    hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
    hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
    hda: UDMA/33 mode selected
    hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
    hdb: UDMA/66 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: max request size: 512KiB
    hda: 241254720 sectors (123522 MB) w/1794KiB Cache, CHS=16383/255/63
    hda: cache flushes supported
    hda: hda1 hda2
    hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    ReiserFS: hda1: found reiserfs format "3.6" with standard journal
    ReiserFS: hda1: using ordered data mode
    ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda1: checking transaction log (hda1)
    ReiserFS: hda1: Using r5 hash to sort names
    input: PC Speaker as /class/input/input4
    pnp: the driver 'parport_pc' has been registered
    parport_pc 00:06: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    input: Power Button (FF) as /class/input/input5
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input6
    parport_pc 00:06: driver attached
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
    i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
    ACPI: Power Button (CM) [PWRB]
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:05.0 to 64
    hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
    Adding 996020k swap on /dev/hda2. Priority:-1 extents:1 across:996020k
    ip_tables: (C) 2000-2006 Netfilter Core Team
    nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    eth0: no IPv6 routers present
    Initializing cgroup subsys cpuset
    Linux version 2.6.25-rc9 (lxuser@pdc3) (gcc version 4.2.3 (Debian 4.2.3-3)) #1 SMP Sun Apr 13 14:31:00 CEST 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
    BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
    BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
    BIOS-e820: 000000003ffe0000 - 000000003ffee000 (reserved)
    BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    Scan SMP from c0000000 for 1024 bytes.
    Scan SMP from c009fc00 for 1024 bytes.
    Scan SMP from c00f0000 for 65536 bytes.
    found SMP MP-table at [c00ff780] 000ff780
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 262064
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 262064
    DMI present.
    ACPI: RSDP 000FB770, 0014 (r0 ACPIAM)
    ACPI: RSDT 3FFB0000, 0038 (r1 A_M_I_ OEMRSDT 12000704 MSFT 97)
    ACPI: FACP 3FFB0200, 0084 (r2 A_M_I_ OEMFACP 12000704 MSFT 97)
    ACPI: DSDT 3FFB05D0, 65BA (r1 A0865 A0865000 0 INTL 20051117)
    ACPI: FACS 3FFBE000, 0040
    ACPI: APIC 3FFB0390, 0080 (r1 A_M_I_ OEMAPIC 12000704 MSFT 97)
    ACPI: MCFG 3FFB0410, 003C (r1 A_M_I_ OEMMCFG 12000704 MSFT 97)
    ACPI: OEMB 3FFBE040, 0060 (r1 A_M_I_ AMI_OEM 12000704 MSFT 97)
    ACPI: HPET 3FFB6B90, 0038 (r1 A_M_I_ OEMHPET0 12000704 MSFT 97)
    Detected use of extended apic ids on hypertransport bus
    ACPI: PM-Timer IO Port: 0x508
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:11 APIC version 16
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 15:11 APIC version 16
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x10de8201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260017
    Kernel command line: root=/dev/hda1 console=ttyS0 apic=debug
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2109.580 MHz processor.
    Console: colour VGA+ 80x25
    console [ttyS0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1030868k/1048256k available (1776k kernel code, 16664k reserved, 753k data, 208k init, 130752k highmem)
    virtual kernel memory layout:
    fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc047f000 - 0xc04b3000 ( 208 kB)
    .data : 0xc03bc214 - 0xc0478648 ( 753 kB)
    .text : 0xc0200000 - 0xc03bc214 (1776 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Calibrating delay using timer specific routine.. 4223.38 BogoMIPS (lpj=8446775)
    Security Framework initialized
    SELinux: Disabled at boot.
    Capability LSM initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 0(2) -> Core 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20070126
    CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02
    Getting VERSION: 80050010
    Getting VERSION: 80050010
    Getting ID: 0
    Getting LVT0: 700
    Getting LVT1: 400
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 0x00000004 after: 0x00000000
    Booting processor 1/1 ip 4000
    Initializing CPU#1
    masked ExtINT on CPU#1
    Calibrating delay using timer specific routine.. 4219.24 BogoMIPS (lpj=8438491)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 1(2) -> Core 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 02
    Total of 2 processors activated (8442.63 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
    ..MP-BIOS bug: 8254 timer not connected to IO-APIC
    ...trying to set up timer (IRQ0) through the 8259A ... failed.
    ...trying to set up timer as Virtual
    \
     
     \ /
      Last update: 2008-04-13 15:03    [W:0.069 / U:62.764 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site