lkml.org 
[lkml]   [2008]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG REPORT] smc911x: Auto negotiation NOT supported
Hi, Will

Thanks for your reply.

On Fri, Mar 7, 2008 at 8:54 PM, Will Newton <will.newton@gmail.com> wrote:
> Are you getting interrupts from the chip? Sounds like it could be you
> have missed and interrupt somewhere - check where your interrupt
> polarities and where you are acking/clearing them down.
>

I think there's no problem with getting interrupts.
Because the driver works well while eth0 is configured for DHCP mode.
Only static IP allocation occurs the problem.

Here is the /proc/interrupts.
(The interrupt for eth0 is recognized as IRQ 9)
~ $ cat /proc/interrupts
CPU0
3: 46 sh7780-irl3210-level rtc-62423a period
6: 67 sh7780-irl3210-level r8a66597_hcd:usb1
9: 96 sh7780-irl3210-level eth0
12: 0 sh7780-irl3210-level fb0
13: 0 sh7780-irl3210-level fb0
28: 11366 sh7780-level periodic timer
38: 0 sh7780-level DMAC Address Error
40: 0 sh7780-level SCI Receive Error
41: 62 sh7780-level SCI Receive Data Full
42: 0 sh7780-level SCI Break
43: 1901 sh7780-level SCI Transmit Data Empty
68: 1 sh7780-level yenta
Err: 0

Regards,
Jeongdo Son


\
 
 \ /
  Last update: 2008-03-10 02:49    [W:0.074 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site