lkml.org 
[lkml]   [2008]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: AE_ERROR, ACPI thermal trip point state changed
From
Date
hi, Márton,

Please re-send the acpidump using the latest pmtools at
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/

thanks,
rui

On Thu, 2008-03-06 at 08:01 +0100, Németh Márton wrote:
> Hi,
>
> in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J laptop:
>
> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed
> Please send acpidump to linux-acpi@vger.kernel.org
> [20070126]
>
> Should I do something else than sending the acpidump?
>
> Márton Németh
>
>
> Németh Márton wrote:
> > Hi,
> >
> > I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop:
> >
> > ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed
> > Please send acpidump to linux-acpi@vger.kernel.org
> > [20070126]
> >
> > So I am writing this email to you.
> >
> > Márton Németh
>
> plain text document attachment (dmesg-2.6.25-rc4.txt)
> Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
> BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
> BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
> BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
> 63MB HIGHMEM available.
> 896MB LOWMEM available.
> Scan SMP from c0000000 for 1024 bytes.
> Scan SMP from c009fc00 for 1024 bytes.
> Scan SMP from c00f0000 for 65536 bytes.
> found SMP MP-table at [c00f6870] 000f6870
> Entering add_active_range(0, 0, 245616) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 229376
> HighMem 229376 -> 245616
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 245616
> On node 0 totalpages: 245616
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 1760 pages used for memmap
> Normal zone: 223520 pages, LIFO batch:31
> HighMem zone: 126 pages used for memmap
> HighMem zone: 16114 pages, LIFO batch:3
> Movable zone: 0 pages used for memmap
> DMI present.
> ACPI: RSDP 000F68D0, 0014 (r0 PTLTD )
> ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
> ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240)
> ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
> ACPI: FACS 3BF7AFC0, 0040
> ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
> ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 15:12 APIC version 16
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ10 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
> PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698
> Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2
> log_buf_len: 1048576
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 1603.695 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> ... MAX_LOCKDEP_SUBCLASSES: 8
> ... MAX_LOCK_DEPTH: 48
> ... MAX_LOCKDEP_KEYS: 2048
> ... CLASSHASH_SIZE: 1024
> ... MAX_LOCKDEP_ENTRIES: 8192
> ... MAX_LOCKDEP_CHAINS: 16384
> ... CHAINHASH_SIZE: 8192
> memory used by lock dependency info: 992 kB
> per task-struct memory footprint: 1920 bytes
> ------------------------
> | Locking API testsuite:
> ----------------------------------------------------------------------------
> | spin |wlock |rlock |mutex | wsem | rsem |
> --------------------------------------------------------------------------
> A-A deadlock: ok | ok | ok | ok | ok | ok |
> A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
> A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
> A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
> A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
> A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
> A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
> double unlock: ok | ok | ok | ok | ok | ok |
> initialize held: ok | ok | ok | ok | ok | ok |
> bad unlock order: ok | ok | ok | ok | ok | ok |
> --------------------------------------------------------------------------
> recursive read-lock: | ok | | ok |
> recursive read-lock #2: | ok | | ok |
> mixed read-write-lock: | ok | | ok |
> mixed write-read-lock: | ok | | ok |
> --------------------------------------------------------------------------
> hard-irqs-on + irq-safe-A/12: ok | ok | ok |
> soft-irqs-on + irq-safe-A/12: ok | ok | ok |
> hard-irqs-on + irq-safe-A/21: ok | ok | ok |
> soft-irqs-on + irq-safe-A/21: ok | ok | ok |
> sirq-safe-A => hirqs-on/12: ok | ok | ok |
> sirq-safe-A => hirqs-on/21: ok | ok | ok |
> hard-safe-A + irqs-on/12: ok | ok | ok |
> soft-safe-A + irqs-on/12: ok | ok | ok |
> hard-safe-A + irqs-on/21: ok | ok | ok |
> soft-safe-A + irqs-on/21: ok | ok | ok |
> hard-safe-A + unsafe-B #1/123: ok | ok | ok |
> soft-safe-A + unsafe-B #1/123: ok | ok | ok |
> hard-safe-A + unsafe-B #1/132: ok | ok | ok |
> soft-safe-A + unsafe-B #1/132: ok | ok | ok |
> hard-safe-A + unsafe-B #1/213: ok | ok | ok |
> soft-safe-A + unsafe-B #1/213: ok | ok | ok |
> hard-safe-A + unsafe-B #1/231: ok | ok | ok |
> soft-safe-A + unsafe-B #1/231: ok | ok | ok |
> hard-safe-A + unsafe-B #1/312: ok | ok | ok |
> soft-safe-A + unsafe-B #1/312: ok | ok | ok |
> hard-safe-A + unsafe-B #1/321: ok | ok | ok |
> soft-safe-A + unsafe-B #1/321: ok | ok | ok |
> hard-safe-A + unsafe-B #2/123: ok | ok | ok |
> soft-safe-A + unsafe-B #2/123: ok | ok | ok |
> hard-safe-A + unsafe-B #2/132: ok | ok | ok |
> soft-safe-A + unsafe-B #2/132: ok | ok | ok |
> hard-safe-A + unsafe-B #2/213: ok | ok | ok |
> soft-safe-A + unsafe-B #2/213: ok | ok | ok |
> hard-safe-A + unsafe-B #2/231: ok | ok | ok |
> soft-safe-A + unsafe-B #2/231: ok | ok | ok |
> hard-safe-A + unsafe-B #2/312: ok | ok | ok |
> soft-safe-A + unsafe-B #2/312: ok | ok | ok |
> hard-safe-A + unsafe-B #2/321: ok | ok | ok |
> soft-safe-A + unsafe-B #2/321: ok | ok | ok |
> hard-irq lock-inversion/123: ok | ok | ok |
> soft-irq lock-inversion/123: ok | ok | ok |
> hard-irq lock-inversion/132: ok | ok | ok |
> soft-irq lock-inversion/132: ok | ok | ok |
> hard-irq lock-inversion/213: ok | ok | ok |
> soft-irq lock-inversion/213: ok | ok | ok |
> hard-irq lock-inversion/231: ok | ok | ok |
> soft-irq lock-inversion/231: ok | ok | ok |
> hard-irq lock-inversion/312: ok | ok | ok |
> soft-irq lock-inversion/312: ok | ok | ok |
> hard-irq lock-inversion/321: ok | ok | ok |
> soft-irq lock-inversion/321: ok | ok | ok |
> hard-irq read-recursion/123: ok |
> soft-irq read-recursion/123: ok |
> hard-irq read-recursion/132: ok |
> soft-irq read-recursion/132: ok |
> hard-irq read-recursion/213: ok |
> soft-irq read-recursion/213: ok |
> hard-irq read-recursion/231: ok |
> soft-irq read-recursion/231: ok |
> hard-irq read-recursion/312: ok |
> soft-irq read-recursion/312: ok |
> hard-irq read-recursion/321: ok |
> soft-irq read-recursion/321: ok |
> -------------------------------------------------------
> Good, all 218 testcases passed! |
> ---------------------------------
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k data, 272k init, 64960k highmem)
> virtual kernel memory layout:
> fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> .init : 0xc03e8000 - 0xc042c000 ( 272 kB)
> .data : 0xc0305c2b - 0xc03e4c18 ( 891 kB)
> .text : 0xc0100000 - 0xc0305c2b (2071 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> CPA: page pool initialized 1 of 1 pages preallocated
> Calibrating delay using timer specific routine.. 3210.53 BogoMIPS (lpj=1605269)
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 128K (64 bytes/line)
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Compat vDSO mapped to ffffe000.
> CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00
> Checking 'hlt' instruction... OK.
> Freeing SMP alternatives: 0k freed
> ACPI: Core revision 20070126
> Parsing all Control Methods:
> Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions
> Parsing all Control Methods:
> Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
> evxfevnt-0091 [00] enable : Transition to ACPI mode successful
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
> net_namespace: 604 bytes
> NET: Registered protocol family 16
> EISA bus registered
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
> PCI: Using configuration type 1
> Setting up standard PCI resources
> evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA
> evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
> ACPI: EC: Look up EC in DSDT
> Completing Region/Field/Buffer/Package initialization:.....................................................
> Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes)
> Initializing Device/Processor/Thermal objects by executing _INI methods:.
> Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects)
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> ACPI: EC: missing write data confirmation, don't expect it any longer.
> ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in interrupt mode
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
> pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
> ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
> ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
> ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> 00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
> pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
> 00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
> pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
> pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
> pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
> pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
> pnp: PnP ACPI: found 11 devices
> ACPI: ACPI bus type pnp unregistered
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> pnp: the driver 'system' has been registered
> system 00:05: iomem range 0x0-0x9ffff could not be reserved
> system 00:05: iomem range 0xe0000-0xfffff could not be reserved
> system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
> system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
> system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
> system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
> system 00:05: driver attached
> system 00:06: ioport range 0x4d0-0x4d1 has been reserved
> system 00:06: ioport range 0xfe10-0xfe11 has been reserved
> system 00:06: ioport range 0xfe00-0xfe00 has been reserved
> system 00:06: ioport range 0x4000-0x407f has been reserved
> system 00:06: ioport range 0x8100-0x811f could not be reserved
> Time: tsc clocksource has been installed.
> system 00:06: driver attached
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: 0xd1000000-0xd1ffffff
> PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
> PCI: Bus 2, cardbus bridge: 0000:00:0c.0
> IO window: 0x00002000-0x000020ff
> IO window: 0x00002400-0x000024ff
> PREFETCH window: 0x50000000-0x53ffffff
> MEM window: 0x54000000-0x57ffffff
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
> ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:0c.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> audit: initializing netlink socket (disabled)
> type=2000 audit(1204788516.711:1): initialized
> highmem bounce pool size: 64 pages
> io scheduler noop registered
> io scheduler cfq registered (default)
> PCI: VIA PCI bridge detected. Disabling DAC.
> pci 0000:01:00.0: Boot video device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Uniform Multi-Platform E-IDE driver
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
> ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
> ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
> ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
> ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
> ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO
> ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO
> Probing IDE interface ide0...
> Switched to high resolution mode on CPU 0
> hdb: IRQ probe failed (0xfffffbfe)
> hdb: IRQ probe failed (0xfffffbfe)
> hda: SAMSUNG MP0804H, ATA DISK drive
> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/100 mode selected
> Probing IDE interface ide1...
> hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
> hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> hdc: UDMA/33 mode selected
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> pnp: the driver 'ide' has been registered
> hda: max request size: 512KiB
> hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63
> hda: cache flushes supported
> hda: hda1 hda2 hda3
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI Shortcut mode
> ReiserFS: hda3: found reiserfs format "3.6" with standard journal
> ReiserFS: hda3: using ordered data mode
> ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> ReiserFS: hda3: checking transaction log (hda3)
> ReiserFS: hda3: Using r5 hash to sort names
> VFS: Mounted root (reiserfs filesystem) readonly.
> Freeing unused kernel memory: 272k freed
> Write protecting the kernel read-only data: 732k
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> ACPI: ACPI0007:00 is registered as cooling_device0
> input: Power Button (FF) as /class/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Power Button (CM) as /class/input/input1
> ACPI: Power Button (CM) [PWB]
> input: Sleep Button (CM) as /class/input/input2
> ACPI: Sleep Button (CM) [SLPB]
> input: Lid Switch as /class/input/input3
> ACPI: Lid Switch [LID]
> ACPI: LNXTHERM:01 is registered as thermal_zone0
> ACPI: Thermal Zone [THRM] (14 C)
> ACPI: AC Adapter [AC] (on-line)
> ACPI: Battery Slot [BAT0] (battery present)
> Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702]
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44
> 8139too Fast Ethernet driver 0.9.28
> hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
> Yenta: ISA IRQ mask 0x0840, PCI irq 16
> Socket status: 30000006
> ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
> eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19
> eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> Marking TSC unstable due to: possible TSC halt in C2.
> Time: acpi_pm clocksource has been installed.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> input: PC Speaker as /class/input/input4
> pnp: the driver 'parport_pc' has been registered
> parport_pc 00:0a: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Real Time Clock Driver v1.12ac
> parport_pc 00:0a: driver attached
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
> ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
> ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.0: UHCI Host Controller
> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.1: UHCI Host Controller
> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.2: UHCI Host Controller
> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> pnp: the driver 'serial' has been registered
> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial 00:09: driver attached
> ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
> ehci_hcd 0000:00:10.3: EHCI Host Controller
> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
> ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
> ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 6 ports detected
> cs: IO port probe 0x100-0x4ff: clean.
> cs: IO port probe 0x800-0x8ff: clean.
> cs: IO port probe 0xc00-0xcff: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
> ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
> ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
> ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
> PCI: Setting latency timer of device 0000:00:11.6 to 64
> ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
> PCI: Setting latency timer of device 0000:00:11.5 to 64
> Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
> pnp: the driver 'i8042 kbd' has been registered
> i8042 kbd 00:08: driver attached
> pnp: the driver 'i8042 aux' has been registered
> i8042 aux 00:07: driver attached
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> input: AT Translated Set 2 keyboard as /class/input/input5
> powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00)
> powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6
> powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18
> powernow-k8: ph2 null fid transition 0x8
> input: PS/2 Mouse as /class/input/input6
> input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
> mice: PS/2 mouse device common for all mice
> Linux agpgart interface v0.103
> [drm] Initialized drm 1.1.0 20060810
> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> [drm] Initialized via 2.11.1 20070202 on minor 0
> leds_clevo_mail: 'Clevo D410J' found
> Registered led device: clevo::mail
> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed
> Please send acpidump to linux-acpi@vger.kernel.org
> [20070126]
> ReiserFS: hda1: found reiserfs format "3.6" with standard journal
> ReiserFS: hda1: using ordered data mode
> ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> ReiserFS: hda1: checking transaction log (hda1)
> ReiserFS: hda1: Using r5 hash to sort names
> ip_tables: (C) 2000-2006 Netfilter Core Team
> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
> NET: Registered protocol family 10
> lp0: using parport0 (interrupt-driven).
> ppdev: user-space parallel port driver
> Clocksource tsc unstable (delta = -282353088 ns)
> eth0: no IPv6 routers present
> warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
> irq 16: nobody cared (try booting with the "irqpoll" option)
> Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1
> [<c0157227>] __report_bad_irq+0x27/0x90
> [<c01574c6>] note_interrupt+0x236/0x270
> [<c01568d3>] ? handle_IRQ_event+0x53/0x60
> [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0
> [<c0106174>] do_IRQ+0x44/0xa0
> [<c0104c66>] common_interrupt+0x2e/0x34
> [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50
> [<c0118974>] finish_task_switch+0x54/0xc0
> [<c0118920>] ? finish_task_switch+0x0/0xc0
> [<c02ff326>] schedule+0x2b6/0x470
> [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor]
> [<c0102b65>] cpu_idle+0xb5/0xd0
> [<c02fa66c>] rest_init+0x5c/0x60
> =======================
> handlers:
> [<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
> [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via])
> Disabling IRQ #16

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-03-06 08:43    [W:0.067 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site