lkml.org 
[lkml]   [2008]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subjectpatch pm-handle-device-registrations-during-suspend-resume.patch added to gregkh-2.6 tree
From
Date

This is a note to let you know that I've just added the patch titled

Subject: PM: Handle device registrations during suspend/resume

to my gregkh-2.6 tree. Its filename is

pm-handle-device-registrations-during-suspend-resume.patch

This tree can be found at
http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/


From rjw@sisk.pl Thu Mar 13 13:44:50 2008
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Wed, 12 Mar 2008 00:57:22 +0100
Subject: PM: Handle device registrations during suspend/resume
To: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>, Andrew Morton <akpm@linux-foundation.org>, David Brownell <david-b@pacbell.net>, LKML <linux-kernel@vger.kernel.org>, Pavel Machek <pavel@ucw.cz>, pm list <linux-pm@lists.linux-foundation.org>
Message-ID: <200803120057.23101.rjw@sisk.pl>
Content-Disposition: inline


From: Rafael J. Wysocki <rjw@sisk.pl>

Modify the PM core to protect its data structures, specifically the
dpm_active list, from being corrupted if a child of the currently
suspending device is registered concurrently with its ->suspend()
callback. In that case, since the new device (the child) is added
to dpm_active after its parent, the PM core will attempt to
suspend it after the parent, which is wrong.

Introduce a new member of struct dev_pm_info, called 'sleeping',
and use it to check if the parent of the device being added to
dpm_active has been suspended, in which case the device registration
fails. Also, use 'sleeping' for checking if the ordering of devices
on dpm_active is correct.

Introduce variable 'all_sleeping' that will be set to 'true' once all
devices have been suspended and make new device registrations fail
until 'all_sleeping' is reset to 'false', in order to avoid having
unsuspended devices around while the system is going into a sleep state.

Remove pm_sleep_rwsem which is not necessary any more.

Special thanks to Alan Stern for discussions and suggestions that
lead to the creation of this patch.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
Documentation/power/devices.txt | 5 +++
drivers/base/core.c | 6 +++-
drivers/base/power/main.c | 57 ++++++++++++++++++----------------------
drivers/base/power/power.h | 23 ++--------------
include/linux/pm.h | 1
5 files changed, 40 insertions(+), 52 deletions(-)

--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -196,6 +196,11 @@ its parent; and can't be removed or susp

The policy is that the device tree should match hardware bus topology.
(Or at least the control bus, for devices which use multiple busses.)
+In particular, this means that a device registration may fail if the parent of
+the device is suspending (ie. has been chosen by the PM core as the next
+device to suspend) or has already suspended, as well as after all of the other
+devices have been suspended. Device drivers must be prepared to cope with such
+situations.


Suspending Devices
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -821,7 +821,11 @@ int device_add(struct device *dev)
error = dpm_sysfs_add(dev);
if (error)
goto PMError;
- device_pm_add(dev);
+ error = device_pm_add(dev);
+ if (error) {
+ dpm_sysfs_remove(dev);
+ goto PMError;
+ }
error = bus_add_device(dev);
if (error)
goto BusError;
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -54,7 +54,8 @@ static LIST_HEAD(dpm_destroy);

static DEFINE_MUTEX(dpm_list_mtx);

-static DECLARE_RWSEM(pm_sleep_rwsem);
+/* 'true' if all devices have been suspended, protected by dpm_list_mtx */
+static bool all_sleeping;

int (*platform_enable_wakeup)(struct device *dev, int is_on);

@@ -62,14 +63,28 @@ int (*platform_enable_wakeup)(struct dev
* device_pm_add - add a device to the list of active devices
* @dev: Device to be added to the list
*/
-void device_pm_add(struct device *dev)
+int device_pm_add(struct device *dev)
{
+ int error = 0;
+
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
- list_add_tail(&dev->power.entry, &dpm_active);
+ if ((dev->parent && dev->parent->power.sleeping) || all_sleeping) {
+ if (dev->parent->power.sleeping)
+ dev_warn(dev,
+ "parent %s is sleeping, will not add\n",
+ dev->parent->bus_id);
+ else
+ dev_warn(dev, "devices are sleeping, will not add\n");
+ WARN_ON(true);
+ error = -EBUSY;
+ } else {
+ list_add_tail(&dev->power.entry, &dpm_active);
+ }
mutex_unlock(&dpm_list_mtx);
+ return error;
}

/**
@@ -107,32 +122,6 @@ void device_pm_schedule_removal(struct d
}
EXPORT_SYMBOL_GPL(device_pm_schedule_removal);

-/**
- * pm_sleep_lock - mutual exclusion for registration and suspend
- *
- * Returns 0 if no suspend is underway and device registration
- * may proceed, otherwise -EBUSY.
- */
-int pm_sleep_lock(void)
-{
- if (down_read_trylock(&pm_sleep_rwsem))
- return 0;
-
- return -EBUSY;
-}
-
-/**
- * pm_sleep_unlock - mutual exclusion for registration and suspend
- *
- * This routine undoes the effect of device_pm_add_lock
- * when a device's registration is complete.
- */
-void pm_sleep_unlock(void)
-{
- up_read(&pm_sleep_rwsem);
-}
-
-
/*------------------------- Resume routines -------------------------*/

/**
@@ -242,11 +231,13 @@ static int resume_device(struct device *
static void dpm_resume(void)
{
mutex_lock(&dpm_list_mtx);
+ all_sleeping = false;
while(!list_empty(&dpm_off)) {
struct list_head *entry = dpm_off.next;
struct device *dev = to_device(entry);

list_move_tail(entry, &dpm_active);
+ dev->power.sleeping = false;
mutex_unlock(&dpm_list_mtx);
resume_device(dev);
mutex_lock(&dpm_list_mtx);
@@ -285,7 +276,6 @@ void device_resume(void)
might_sleep();
dpm_resume();
unregister_dropped_devices();
- up_write(&pm_sleep_rwsem);
}
EXPORT_SYMBOL_GPL(device_resume);

@@ -421,6 +411,9 @@ static int dpm_suspend(pm_message_t stat
struct list_head *entry = dpm_active.prev;
struct device *dev = to_device(entry);

+ WARN_ON(dev->parent && dev->parent->power.sleeping);
+
+ dev->power.sleeping = true;
mutex_unlock(&dpm_list_mtx);
error = suspend_device(dev, state);
mutex_lock(&dpm_list_mtx);
@@ -432,11 +425,14 @@ static int dpm_suspend(pm_message_t stat
(error == -EAGAIN ?
" (please convert to suspend_late)" :
""));
+ dev->power.sleeping = false;
break;
}
if (!list_empty(&dev->power.entry))
list_move(&dev->power.entry, &dpm_off);
}
+ if (!error)
+ all_sleeping = true;
mutex_unlock(&dpm_list_mtx);

return error;
@@ -454,7 +450,6 @@ int device_suspend(pm_message_t state)
int error;

might_sleep();
- down_write(&pm_sleep_rwsem);
error = dpm_suspend(state);
if (error)
device_resume();
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -11,30 +11,13 @@ static inline struct device *to_device(s
return container_of(entry, struct device, power.entry);
}

-extern void device_pm_add(struct device *);
+extern int device_pm_add(struct device *);
extern void device_pm_remove(struct device *);
-extern int pm_sleep_lock(void);
-extern void pm_sleep_unlock(void);

#else /* CONFIG_PM_SLEEP */

-
-static inline void device_pm_add(struct device *dev)
-{
-}
-
-static inline void device_pm_remove(struct device *dev)
-{
-}
-
-static inline int pm_sleep_lock(void)
-{
- return 0;
-}
-
-static inline void pm_sleep_unlock(void)
-{
-}
+static inline int device_pm_add(struct device *dev) { return 0; }
+static inline void device_pm_remove(struct device *dev) {}

#endif

--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -183,6 +183,7 @@ typedef struct pm_message {
struct dev_pm_info {
pm_message_t power_state;
unsigned can_wakeup:1;
+ bool sleeping:1; /* Owned by the PM core */
#ifdef CONFIG_PM_SLEEP
unsigned should_wakeup:1;
struct list_head entry;

Patches currently in gregkh-2.6 which might be from rjw@sisk.pl are

driver-core/power_state-remove-it-from-driver-core.patch
driver-core/pm-handle-device-registrations-during-suspend-resume.patch
driver-core/pm-make-wakeup-flags-available-whenever-config_pm-is-set.patch
driver-core/driver-core-call-device_pm_add-after-bus_add_device-in-device_add.patch


\
 
 \ /
  Last update: 2008-03-13 21:59    [W:0.072 / U:6.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site