lkml.org 
[lkml]   [2008]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.25-rc3 sometimes reboot with usb init(probe?) slowly
Hi,
Sometimes (not every time) rebooting will be slow while initilize usb
device

This is not limited to 2.6.25-rc3.

Please see the timing issue in following dmesg output:

---

[ 0.000000] Linux version 2.6.25-rc3 (dave@darkstar) (gcc version 3.4.6) #1 SMP PREEMPT Mon Feb 25 10:43:06 CST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe88c00 (usable)
[ 0.000000] BIOS-e820: 000000003fe88c00 - 000000003fe8ac00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fe8ac00 - 000000003fe8cc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fe8cc00 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00fe710] 000fe710
[ 0.000000] Entering add_active_range(0, 0, 261768) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261768
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261768
[ 0.000000] On node 0 totalpages: 261768
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4040 pages, LIFO batch:0
[ 0.000000] Normal zone: 3080 pages used for memmap
[ 0.000000] Normal zone: 222200 pages, LIFO batch:31
[ 0.000000] HighMem zone: 442 pages used for memmap
[ 0.000000] HighMem zone: 31950 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FEB00, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FD267, 005C (r1 DELL DM051 7 ASL 61)
[ 0.000000] ACPI: FACP 000FD35F, 00F4 (r3 DELL DM051 7 ASL 61)
[ 0.000000] ACPI: DSDT FFFC755F, 2D0E (r1 DELL dt_ex 1000 INTL 20050309)
[ 0.000000] ACPI: FACS 3FE88C00, 0040
[ 0.000000] ACPI: SSDT FFFCA38E, 00AC (r1 DELL st_ex 1000 INTL 20050309)
[ 0.000000] ACPI: APIC 000FD453, 0072 (r1 DELL DM051 7 ASL 61)
[ 0.000000] ACPI: BOOT 000FD4C5, 0028 (r1 DELL DM051 7 ASL 61)
[ 0.000000] ACPI: ASF! 000FD4ED, 0067 (r16 DELL DM051 7 ASL 61)
[ 0.000000] ACPI: MCFG 000FD554, 003E (r1 DELL DM051 7 ASL 61)
[ 0.000000] ACPI: HPET 000FD592, 0038 (r1 DELL DM051 7 ASL 61)
[ 0.000000] ACPI: DMI detected: Dell Dimension 5150
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258190
[ 0.000000] Kernel command line: BOOT_IMAGE=25rc3 ro root=805
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2793.109 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 30
[ 0.003333] ... MAX_LOCKDEP_KEYS: 2048
[ 0.003333] ... CLASSHASH_SIZE: 1024
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 1024 kB
[ 0.003333] per task-struct memory footprint: 1680 bytes
[ 0.003333] ------------------------
[ 0.003333] | Locking API testsuite:
[ 0.003333] ----------------------------------------------------------------------------
[ 0.003333] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.003333] --------------------------------------------------------------------------
[ 0.003333] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.003333] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.003333] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.003333] --------------------------------------------------------------------------
[ 0.003333] recursive read-lock: | ok | | ok |
[ 0.003333] recursive read-lock #2: | ok | | ok |
[ 0.003333] mixed read-write-lock: | ok | | ok |
[ 0.003333] mixed write-read-lock: | ok | | ok |
[ 0.003333] --------------------------------------------------------------------------
[ 0.003333] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.003333] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.003333] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.003333] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.003333] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.003333] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.003333] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.003333] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.003333] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.003333] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.003333] hard-irq read-recursion/123: ok |
[ 0.003333] soft-irq read-recursion/123: ok |
[ 0.003333] hard-irq read-recursion/132: ok |
[ 0.003333] soft-irq read-recursion/132: ok |
[ 0.003333] hard-irq read-recursion/213: ok |
[ 0.003333] soft-irq read-recursion/213: ok |
[ 0.003333] hard-irq read-recursion/231: ok |
[ 0.003333] soft-irq read-recursion/231: ok |
[ 0.003333] hard-irq read-recursion/312: ok |
[ 0.003333] soft-irq read-recursion/312: ok |
[ 0.003333] hard-irq read-recursion/321: ok |
[ 0.003333] soft-irq read-recursion/321: ok |
[ 0.003333] -------------------------------------------------------
[ 0.003333] Good, all 218 testcases passed! |
[ 0.003333] ---------------------------------
[ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.003333] Memory: 1023240k/1047072k available (2908k kernel code, 23188k reserved, 1255k data, 552k init, 129568k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.003333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.003333] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.003333] .init : 0xc0518000 - 0xc05a2000 ( 552 kB)
[ 0.003333] .data : 0xc03d734b - 0xc0511038 (1255 kB)
[ 0.003333] .text : 0xc0100000 - 0xc03d734b (2908 kB)
[ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.003333] CPA: page pool initialized 16 of 16 pages preallocated
[ 0.003333] SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 0.003333] hpet clockevent registered
[ 0.083335] Calibrating delay using timer specific routine.. 5597.94 BogoMIPS (lpj=9324705)
[ 0.083611] Mount-cache hash table entries: 512
[ 0.084908] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.085012] CPU: L2 cache: 1024K
[ 0.085079] CPU: Physical Processor ID: 0
[ 0.085148] CPU: Processor Core ID: 0
[ 0.085218] Intel machine check architecture supported.
[ 0.085294] Intel machine check reporting enabled on CPU#0.
[ 0.085369] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.085453] Compat vDSO mapped to ffffe000.
[ 0.085530] Checking 'hlt' instruction... OK.
[ 0.097092] ACPI: Core revision 20070126
[ 0.216083] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
[ 0.216330] lockdep: fixing up alternatives.
[ 0.216403] Booting processor 1/1 ip 4000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 5588.89 BogoMIPS (lpj=9310227)
[ 0.003333] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.003333] CPU: L2 cache: 1024K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] Intel machine check architecture supported.
[ 0.003333] Intel machine check reporting enabled on CPU#1.
[ 0.003333] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.310393] CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
[ 0.311208] Total of 2 processors activated (11185.83 BogoMIPS).
[ 0.311475] ENABLING IO-APIC IRQs
[ 0.311803] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.346644] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.346694] Brought up 2 CPUs
[ 0.346816] CPU0 attaching sched-domain:
[ 0.346820] domain 0: span 03
[ 0.346823] groups: 01 02
[ 0.346830] CPU1 attaching sched-domain:
[ 0.346833] domain 0: span 03
[ 0.346836] groups: 02 01
[ 0.347904] net_namespace: 528 bytes
[ 0.350228] NET: Registered protocol family 16
[ 0.351557] ACPI: bus type pci registered
[ 0.352177] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[ 0.377391] PCI: PCI BIOS revision 2.10 entry at 0xfb93e, last bus=3
[ 0.377467] PCI: Using configuration type 1
[ 0.377536] Setting up standard PCI resources
[ 0.400739] ACPI: EC: Look up EC in DSDT
[ 0.442033] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.455269] ACPI: Interpreter enabled
[ 0.455341] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.455715] ACPI: Using IOAPIC for interrupt routing
[ 0.536727] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.538548] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.538662] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.540325] PCI: Transparent bridge - 0000:00:1e.0
[ 0.540473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.546409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.550218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.551748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 1.256590] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.256590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.256590] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.257264] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.258510] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.259606] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.260807] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.261955] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 1.263297] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.263492] pnp: PnP ACPI init
[ 1.263670] ACPI: bus type pnp registered
[ 1.299045] pnpacpi: exceeded the max number of IO resources: 40
[ 1.299320] pnp: PnP ACPI: found 8 devices
[ 1.299392] ACPI: ACPI bus type pnp unregistered
[ 1.303254] SCSI subsystem initialized
[ 1.303254] libata version 3.00 loaded.
[ 1.303254] usbcore: registered new interface driver usbfs
[ 1.303254] usbcore: registered new interface driver hub
[ 1.303260] usbcore: registered new device driver usb
[ 1.304267] PCI: Using ACPI for IRQ routing
[ 1.304341] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 1.329919] ACPI: RTC can wake from S4
[ 1.329919] Time: tsc clocksource has been installed.
[ 1.329975] Switched to high resolution mode on CPU 0
[ 1.001505] Switched to high resolution mode on CPU 1
[ 1.350120] system 00:01: ioport range 0x800-0x85f has been reserved
[ 1.350120] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 1.350120] system 00:01: ioport range 0x860-0x8ff could not be reserved
[ 1.350120] system 00:06: iomem range 0x0-0x9ffff could not be reserved
[ 1.350120] system 00:06: iomem range 0x100000-0xffffff could not be reserved
[ 1.350120] system 00:06: iomem range 0x1000000-0x3fe88bff could not be reserved
[ 1.350120] system 00:06: iomem range 0xf0000-0xfffff could not be reserved
[ 1.350120] system 00:06: iomem range 0xc0000-0xcffff could not be reserved
[ 1.350120] system 00:06: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 1.350120] system 00:06: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.350120] system 00:06: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 1.350120] system 00:06: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 1.350120] system 00:06: iomem range 0xffc00000-0xffffffff could not be reserved
[ 1.350120] system 00:07: ioport range 0x100-0x1fe could not be reserved
[ 1.350120] system 00:07: ioport range 0x200-0x277 has been reserved
[ 1.350120] system 00:07: ioport range 0x280-0x2e7 has been reserved
[ 1.350120] system 00:07: ioport range 0x2e8-0x2ef has been reserved
[ 1.350120] system 00:07: ioport range 0x2f0-0x2f7 has been reserved
[ 1.350120] system 00:07: ioport range 0x2f8-0x2ff has been reserved
[ 1.350120] system 00:07: ioport range 0x300-0x377 could not be reserved
[ 1.350120] system 00:07: ioport range 0x380-0x3bb has been reserved
[ 1.350120] system 00:07: ioport range 0x3c0-0x3e7 could not be reserved
[ 1.350120] system 00:07: ioport range 0x3f6-0x3f7 could not be reserved
[ 1.350120] system 00:07: ioport range 0x400-0x4cf has been reserved
[ 1.350120] system 00:07: ioport range 0x4d2-0x57f has been reserved
[ 1.350120] system 00:07: ioport range 0x580-0x677 has been reserved
[ 1.350120] system 00:07: ioport range 0x680-0x777 has been reserved
[ 1.350120] system 00:07: ioport range 0x780-0x7bb has been reserved
[ 1.350120] system 00:07: ioport range 0x7c0-0x7ff has been reserved
[ 1.350120] system 00:07: ioport range 0x8e0-0x8ff has been reserved
[ 1.350120] system 00:07: ioport range 0x900-0x9fe has been reserved
[ 1.350120] system 00:07: ioport range 0xa00-0xafe has been reserved
[ 1.350120] system 00:07: ioport range 0xb00-0xbfe has been reserved
[ 1.350120] system 00:07: ioport range 0xc80-0xcaf has been reserved
[ 1.350120] system 00:07: ioport range 0xcb0-0xcbf has been reserved
[ 1.350120] system 00:07: ioport range 0xcc0-0xcf7 has been reserved
[ 1.350120] system 00:07: ioport range 0xd00-0xdfe has been reserved
[ 1.350130] system 00:07: ioport range 0xe00-0xefe has been reserved
[ 1.350209] system 00:07: ioport range 0xf00-0xffe has been reserved
[ 1.350286] system 00:07: ioport range 0x2000-0x20fe has been reserved
[ 1.350364] system 00:07: ioport range 0x2100-0x21fe has been reserved
[ 1.350441] system 00:07: ioport range 0x2200-0x22fe has been reserved
[ 1.350519] system 00:07: ioport range 0x2300-0x23fe has been reserved
[ 1.350597] system 00:07: ioport range 0x2400-0x24fe has been reserved
[ 1.350675] system 00:07: ioport range 0x2500-0x25fe has been reserved
[ 1.350752] system 00:07: ioport range 0x2600-0x26fe has been reserved
[ 1.350830] system 00:07: ioport range 0x2700-0x27fe has been reserved
[ 1.350908] system 00:07: ioport range 0x2800-0x28fe has been reserved
[ 1.350986] system 00:07: ioport range 0x2900-0x29fe has been reserved
[ 1.351064] system 00:07: ioport range 0x2a00-0x2afe has been reserved
[ 1.351142] system 00:07: ioport range 0x2b00-0x2bfe has been reserved
[ 1.351220] system 00:07: ioport range 0x2c00-0x2cfe has been reserved
[ 1.351298] system 00:07: ioport range 0x2d00-0x2dfe has been reserved
[ 1.351379] system 00:07: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 1.351488] system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 1.382831] PCI: Bridge: 0000:00:01.0
[ 1.382904] IO window: d000-dfff
[ 1.382981] MEM window: 0xefd00000-0xefefffff
[ 1.383056] PREFETCH window: 0x00000000e0000000-0x00000000e7ffffff
[ 1.383141] PCI: Bridge: 0000:00:1c.0
[ 1.383209] IO window: disabled.
[ 1.383285] MEM window: 0xefc00000-0xefcfffff
[ 1.383360] PREFETCH window: disabled.
[ 1.383445] PCI: Bridge: 0000:00:1e.0
[ 1.383517] IO window: c000-cfff
[ 1.383593] MEM window: 0xefa00000-0xefbfffff
[ 1.383668] PREFETCH window: disabled.
[ 1.383791] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.383881] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.383933] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.384078] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.384105] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1.384140] NET: Registered protocol family 2
[ 1.440532] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.440532] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.440532] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 1.452362] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.452488] TCP reno registered
[ 1.473933] Simple Boot Flag at 0x7a set to 0x80
[ 1.158607] highmem bounce pool size: 64 pages
[ 1.185774] VFS: Disk quotas dquot_6.5.1
[ 1.186284] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.189728] NTFS driver 2.1.29 [Flags: R/W].
[ 1.193062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.193190] io scheduler noop registered
[ 1.193261] io scheduler anticipatory registered (default)
[ 1.193334] io scheduler deadline registered
[ 1.194023] io scheduler cfq registered
[ 1.194277] pci 0000:01:00.0: Boot video device
[ 1.194306] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
[ 1.194862] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.194993] assign_interrupt_mode Found MSI capability
[ 1.195070] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.195467] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.195651] assign_interrupt_mode Found MSI capability
[ 1.195729] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.195966] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.352189] Real Time Clock Driver v1.12ac
[ 1.352341] intel_rng: Firmware space is locked read-only. If you can't or
[ 1.352343] intel_rng: don't want to disable this in firmware setup, and if
[ 1.352345] intel_rng: you are certain that your system has a functional
[ 1.352346] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 1.352684] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.356062] Floppy drive(s): fd0 is 1.44M
[ 4.371511] floppy0: no floppy controllers found
[ 4.376401] brd: module loaded
[ 4.377003] console [netcon0] enabled
[ 4.378193] netconsole: network logging started
[ 4.378264] Uniform Multi-Platform E-IDE driver
[ 4.378337] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.378701] ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1
[ 4.378825] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.378975] ICH7: not 100% native mode: will probe irqs later
[ 4.379063] ICH7: IDE port disabled
[ 4.379138] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:PIO
[ 4.379291] Probing IDE interface ide0...
[ 5.403641] hda: TSSTcorp CD-RW/DVD-ROM TS-H492C, ATAPI CD/DVD-ROM drive
[ 5.403641] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.403642] hda: UDMA/33 mode selected
[ 5.404027] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.405089] Probing IDE interface ide1...
[ 6.315687] hda: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache
[ 6.315687] Uniform CD-ROM driver Revision: 3.20
[ 6.320734] Driver 'sd' needs updating - please use bus_type methods
[ 6.321030] Driver 'sr' needs updating - please use bus_type methods
[ 6.321379] ata_piix 0000:00:1f.2: version 2.12
[ 6.321424] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
[ 6.321569] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 6.476253] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 6.476376] scsi0 : ata_piix
[ 6.476428] scsi1 : ata_piix
[ 6.476457] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
[ 6.476457] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
[ 6.636511] ata1.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
[ 6.636511] ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 6.643226] ata1.00: configured for UDMA/133
[ 6.813218] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
[ 6.813261] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 6.813261] sd 0:0:0:0: [sda] Write Protect is off
[ 6.813261] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.813261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.813760] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 6.813909] sd 0:0:0:0: [sda] Write Protect is off
[ 6.813981] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.814132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.814283] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 6.920968] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.922593] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
[ 6.922757] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.922764] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.924012] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 6.928147] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.928229] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 6.928259] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 6.944109] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.944294] usb usb1: configuration #1 chosen from 1 choice
[ 6.944309] hub 1-0:1.0: USB hub found
[ 6.944309] hub 1-0:1.0: 8 ports detected
[ 7.047795] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.047825] USB Universal Host Controller Interface driver v3.0
[ 7.047849] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 7.047849] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 7.047849] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.047864] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 7.047864] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 7.048858] usb usb2: configuration #1 chosen from 1 choice
[ 7.049210] hub 2-0:1.0: USB hub found
[ 7.049407] hub 2-0:1.0: 2 ports detected
[ 7.154522] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 7.154522] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 7.154522] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.154560] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 7.154560] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 7.154628] usb usb3: configuration #1 chosen from 1 choice
[ 7.154659] hub 3-0:1.0: USB hub found
[ 7.154659] hub 3-0:1.0: 2 ports detected
[ 7.258062] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 7.258062] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 7.258062] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.258105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 7.258105] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 7.258175] usb usb4: configuration #1 chosen from 1 choice
[ 7.258206] hub 4-0:1.0: USB hub found
[ 7.258206] hub 4-0:1.0: 2 ports detected
[ 7.274929] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 7.361517] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 7.361517] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 7.361517] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 7.361550] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 7.361550] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 7.361622] usb usb5: configuration #1 chosen from 1 choice
[ 7.361653] hub 5-0:1.0: USB hub found
[ 7.361653] hub 5-0:1.0: 2 ports detected
[ 7.398937] usb 1-1: configuration #1 chosen from 1 choice
[ 7.399104] hub 1-1:1.0: USB hub found
[ 7.399163] hub 1-1:1.0: 4 ports detected
[ 8.203048] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 8.383987] usb 3-2: configuration #1 chosen from 1 choice
[ 8.617212] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 8.789330] usb 4-1: configuration #1 chosen from 1 choice
[ 8.995873] usb 1-1.3: new full speed USB device using ehci_hcd and address 5
[ 9.156054] usb 1-1.3: configuration #1 chosen from 1 choice
[ 9.160635] usbcore: registered new interface driver libusual
[ 9.161687] PNP: No PS/2 controller found. Probing ports directly.
[ 9.164763] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.164897] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.165844] mice: PS/2 mouse device common for all mice
[ 9.166672] cpuidle: using governor ladder
[ 9.166746] cpuidle: using governor menu
[ 9.167129] usbcore: registered new interface driver hiddev
[ 9.182630] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input0
[ 64.677054] usb 1-1: USB disconnect, address 2
[ 64.677054] usb 1-1.3: USB disconnect, address 5
[ 64.678008] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2
[ 64.693697] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input1
[ 64.713662] input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-1
[ 64.713676] usbcore: registered new interface driver usbhid
[ 64.713676] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 64.714281] TCP cubic registered
[ 64.714720] NET: Registered protocol family 1
[ 64.714859] NET: Registered protocol family 17
[ 64.714987] Starting balanced_irq
[ 64.715127] Using IPI No-Shortcut mode
[ 64.759402] EXT3-fs: mounted filesystem with ordered data mode.
[ 64.759623] VFS: Mounted root (ext3 filesystem) readonly.
[ 64.760377] Freeing unused kernel memory: 552k freed
[ 64.760822] kjournald starting. Commit interval 5 seconds
[ 66.519566] Adding 1116476k swap on /dev/sda8. Priority:-1 extents:1 across:1116476k
[ 66.688595] EXT3 FS on sda5, internal journal
[ 68.958597] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 68.967863] input: Power Button (FF) as /devices/virtual/input/input2
[ 68.978916] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 68.981406] ACPI: Power Button (FF) [PWRF]
[ 68.981935] input: Power Button (CM) as /devices/virtual/input/input3
[ 69.007321] Linux agpgart interface v0.103
[ 69.009548] ACPI: Power Button (CM) [VBTN]
[ 69.017935] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 69.018088] 3c59x: Donald Becker and others.
[ 69.018167] 0000:03:02.0: 3Com PCI 3c905C Tornado at f88a8f80.
[ 69.031988] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 69.112920] ACPI: ACPI0007:00 is registered as cooling_device0
[ 69.113238] ACPI: ACPI0007:01 is registered as cooling_device1
[ 69.200673] rtc_cmos: probe of 00:05 failed with error -16
[ 69.474946] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 69.475145] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 70.072295] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 72.518491] eth0: setting full-duplex.
[ 77.184515] Bluetooth: Core ver 2.11
[ 77.187752] NET: Registered protocol family 31
[ 77.187758] Bluetooth: HCI device and connection manager initialized
[ 77.187895] Bluetooth: HCI socket layer initialized
[ 77.300348] Bluetooth: L2CAP ver 2.9
[ 77.300355] Bluetooth: L2CAP socket layer initialized
[ 77.357011] Bluetooth: RFCOMM socket layer initialized
[ 77.357051] Bluetooth: RFCOMM TTY layer initialized
[ 77.357054] Bluetooth: RFCOMM ver 1.8
[ 134.461244] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 134.584124] usb 1-1: configuration #1 chosen from 1 choice
[ 134.584124] hub 1-1:1.0: USB hub found
[ 134.584124] hub 1-1:1.0: 4 ports detected
[ 134.890079] usb 1-1.3: new full speed USB device using ehci_hcd and address 7
[ 134.969439] usb 1-1.3: device descriptor read/64, error -32
[ 150.326752] usb 1-1.3: device descriptor read/64, error -110
[ 150.511313] usb 1-1.3: new full speed USB device using ehci_hcd and address 8
[ 150.667003] usb 1-1.3: configuration #1 chosen from 1 choice
[ 150.719433] Bluetooth: HCI USB driver ver 2.9
[ 150.721444] usbcore: registered new interface driver hci_usb


\
 
 \ /
  Last update: 2008-03-11 03:13    [W:0.041 / U:1.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site