lkml.org 
[lkml]   [2008]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 3/4] ieee1394: ohci1394: switch on bus power after resume on PPC PMac
The platform feature calls in the suspend method switched off cable
power, but the calls in the resume method did not switch it back on.

Add the necessary feature call to .resume. Also add the corresponding
call to .suspend to make .suspend's behavior explicitly the same on all
PMacs.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/ieee1394/ohci1394.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

Index: linux/drivers/ieee1394/ohci1394.c
===================================================================
--- linux.orig/drivers/ieee1394/ohci1394.c
+++ linux/drivers/ieee1394/ohci1394.c
@@ -3340,8 +3340,10 @@ static int ohci1394_pci_suspend(struct p
if (machine_is(powermac)) {
struct device_node *ofn = pci_device_to_OF_node(pdev);

- if (ofn)
+ if (ofn) {
pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0);
+ }
}
#endif /* CONFIG_PPC_PMAC */

@@ -3365,8 +3367,10 @@ static int ohci1394_pci_resume(struct pc
if (machine_is(powermac)) {
struct device_node *ofn = pci_device_to_OF_node(pdev);

- if (ofn)
+ if (ofn) {
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1);
pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
+ }
}
#endif /* CONFIG_PPC_PMAC */

--
Stefan Richter
-=====-==--- --== ----=
http://arcgraph.de/sr/


\
 
 \ /
  Last update: 2008-03-01 12:39    [W:0.044 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site