lkml.org 
[lkml]   [2008]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subjectacer aspire 5720ZG APIC error on CPU0: 40(40) ACPI/USB
Date
From
hi
my (DVB) Pinnacle pctv 400e, freeze after error "APIC error on CPU0: 40(40)"
in syslog.
work without problem in m$ windos
and, test it in other computer (althlon 2000xp) with same drivers, work fine
my webcam logitec nx pro, freeze too, after error "APIC error on CPU0: 40
(40)" ...
found same problem here
http://lists-archives.org/video4linux/18626-dvb-usb-bulk-message-failed.html

booting with "noapic" give same result :/
kernel tested: 2.6.22-3 (debian testing), 2.6.24, 2.6.24-git14, and 2.6.24.1
is ACPI bug ? but why i get problem only with usb ?

cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz
stepping : 13
cpu MHz : 800.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 2929.49
clflush size : 64

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz
stepping : 13
cpu MHz : 800.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc
arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 2926.00
clflush size : 64


lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express
Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1
(rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2
(rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3
(rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4
(rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE
Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA
AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev
03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev
a1)
05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit
Ethernet PCI Express (rev 02)
06:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g
Wireless PCI Express Adapter (rev 01)
07:00.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev
05)
07:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host
Adapter (rev 22)
07:00.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
07:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter
(rev 12)
07:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)

syslog
Feb 8 19:22:38 zz kernel: uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT,
period 8, phase 4, 93 us
Feb 8 19:22:38 zz kernel: uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT,
period 8, phase 4, 93 us
Feb 8 19:22:40 zz kernel: uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT,
period 8, phase 4, 93 us
Feb 8 19:25:25 zz kernel: usb usb1: usb resume
Feb 8 19:25:25 zz kernel: usb usb1: finish resume
Feb 8 19:25:25 zz kernel: hub 1-0:1.0: hub_resume
Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: resume root hub
Feb 8 19:25:25 zz kernel: hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status
001803 POWER sig=j CSC CONNECT
Feb 8 19:25:25 zz kernel: hub 1-0:1.0: port 1, status 0501, change 0001, 480
Mb/s
Feb 8 19:25:25 zz kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable
100ms status 0x501
Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: port 1 high speed
Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status
001005 POWER sig=se0 PE CONNECT
Feb 8 19:25:25 zz kernel: usb 1-1: new high speed USB device using ehci_hcd
and address 2
Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: port 1 high speed
Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status
001005 POWER sig=se0 PE CONNECT
Feb 8 19:25:25 zz kernel: usb 1-1: new device strings: Mfr=0, Product=0,
SerialNumber=0
Feb 8 19:25:25 zz kernel: usb 1-1: uevent
Feb 8 19:25:25 zz kernel: usb 1-1: usb_probe_device
Feb 8 19:25:25 zz kernel: usb 1-1: configuration #1 chosen from 1 choice
Feb 8 19:25:25 zz kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Feb 8 19:25:25 zz kernel: usb 1-1:1.0: uevent
Feb 8 19:25:25 zz kernel: usb 1-1:1.0: uevent
Feb 8 19:25:25 zz kernel: drivers/usb/core/inode.c: creating file '002'
Feb 8 19:25:26 zz kernel: dvb_usb_ttusb2 1-1:1.0: usb_probe_interface
Feb 8 19:25:26 zz kernel: dvb_usb_ttusb2 1-1:1.0: usb_probe_interface - got
id
Feb 8 19:25:26 zz kernel: dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in
cold state, will try to load a firmware
Feb 8 19:25:26 zz kernel: dvb-usb: downloading firmware from
file 'dvb-usb-pctv-400e-01.fw'
Feb 8 19:25:26 zz kernel: usbcore: registered new interface driver
dvb_usb_ttusb2
Feb 8 19:25:26 zz kernel: hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
Feb 8 19:25:26 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status
001002 POWER sig=se0 CSC
Feb 8 19:25:26 zz kernel: hub 1-0:1.0: port 1, status 0100, change 0001, 12
Mb/s
Feb 8 19:25:26 zz kernel: usb 1-1: USB disconnect, address 2
Feb 8 19:25:26 zz kernel: usb 1-1: unregistering device
Feb 8 19:25:26 zz kernel: usb 1-1: usb_disable_device nuking all URBs
Feb 8 19:25:26 zz kernel: usb 1-1: unregistering interface 1-1:1.0
Feb 8 19:25:26 zz kernel: dvb-usb: generic DVB-USB module successfully
deinitialized and disconnected.
Feb 8 19:25:26 zz kernel: usb 1-1:1.0: uevent
Feb 8 19:25:26 zz kernel: usb 1-1:1.0: uevent
Feb 8 19:25:26 zz kernel: usb_endpoint usbdev1.2_ep00: ep_device_release
called for usbdev1.2_ep00
Feb 8 19:25:26 zz kernel: usb 1-1: uevent
Feb 8 19:25:26 zz kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable
100ms status 0x100
Feb 8 19:25:27 zz kernel: hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status
001803 POWER sig=j CSC CONNECT
Feb 8 19:25:27 zz kernel: hub 1-0:1.0: port 1, status 0501, change 0001, 480
Mb/s
Feb 8 19:25:27 zz kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable
100ms status 0x501
Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: port 1 high speed
Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status
001005 POWER sig=se0 PE CONNECT
Feb 8 19:25:27 zz kernel: usb 1-1: new high speed USB device using ehci_hcd
and address 3
Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: port 1 high speed
Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status
001005 POWER sig=se0 PE CONNECT
Feb 8 19:25:28 zz kernel: usb 1-1: default language 0x0409
Feb 8 19:25:28 zz kernel: usb 1-1: new device strings: Mfr=1, Product=2,
SerialNumber=0
Feb 8 19:25:28 zz kernel: usb 1-1: Product: PCTV 400e
Feb 8 19:25:28 zz kernel: usb 1-1: Manufacturer: Pinnacle
Feb 8 19:25:28 zz kernel: usb 1-1: uevent
Feb 8 19:25:28 zz kernel: usb 1-1: usb_probe_device
Feb 8 19:25:28 zz kernel: usb 1-1: configuration #1 chosen from 1 choice
Feb 8 19:25:28 zz kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Feb 8 19:25:28 zz kernel: usb 1-1:1.0: uevent
Feb 8 19:25:28 zz kernel: usb 1-1:1.0: uevent
Feb 8 19:25:28 zz kernel: dvb_usb_ttusb2 1-1:1.0: usb_probe_interface
Feb 8 19:25:28 zz kernel: dvb_usb_ttusb2 1-1:1.0: usb_probe_interface - got
id
Feb 8 19:25:28 zz kernel: dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in
warm state.
Feb 8 19:25:28 zz kernel: dvb-usb: will pass the complete MPEG2 transport
stream to the software demuxer.
Feb 8 19:25:28 zz kernel: DVB: registering new adapter (Pinnacle 400e DVB-S
USB2.0).
Feb 8 19:25:28 zz kernel: DVB: registering frontend 0 (Philips TDA10086
DVB-S)...
Feb 8 19:25:28 zz kernel: dvb-usb: Pinnacle 400e DVB-S USB2.0 successfully
initialized and connected.
Feb 8 19:25:28 zz kernel: drivers/usb/core/inode.c: creating file '003'

More info... here http://linuxdeb.free.fr/tmp/

attached files: config_2.6.24.1_core2.txt.gz, dmesg_2.6.24.1.txt.gz

Thank you.
Zouhair.


[unhandled content-type:application/x-gzip][unhandled content-type:application/x-gzip]
\
 
 \ /
  Last update: 2008-02-09 16:03    [W:0.045 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site