lkml.org 
[lkml]   [2008]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] ACPI: thinkpad-acpi: add sysfs led class support to thinkpad leds
Date
Add a sysfs led class interface to the led subdriver.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
Documentation/thinkpad-acpi.txt | 46 +++++++++++++--
drivers/misc/thinkpad_acpi.c | 120 +++++++++++++++++++++++++++++++++++++++
2 files changed, 160 insertions(+), 6 deletions(-)

diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index 0301394..53aa620 100644
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -823,28 +823,62 @@ The cmos command interface is prone to firmware split-brain problems, as
in newer ThinkPads it is just a compatibility layer. Do not use it, it is
exported just as a debug tool.

-LED control -- /proc/acpi/ibm/led
----------------------------------
+LED control
+-----------

-Some of the LED indicators can be controlled through this feature. The
-available commands are:
+procfs: /proc/acpi/ibm/led
+sysfs attributes: as per led class, see below for names
+
+Some of the LED indicators can be controlled through this feature. On
+some older ThinkPad models, it is possible to query the status of the
+LED indicators as well. Newer ThinkPads cannot query the real status
+of the LED indicators.
+
+procfs notes:
+
+The available commands are:

echo '<led number> on' >/proc/acpi/ibm/led
echo '<led number> off' >/proc/acpi/ibm/led
echo '<led number> blink' >/proc/acpi/ibm/led

The <led number> range is 0 to 7. The set of LEDs that can be
-controlled varies from model to model. Here is the mapping on the X40:
+controlled varies from model to model. Here is the common ThinkPad
+mapping:

0 - power
1 - battery (orange)
2 - battery (green)
- 3 - UltraBase
+ 3 - UltraBase/dock
4 - UltraBay
+ 5 - UltraBase battery slot
+ 6 - (unknown)
7 - standby

All of the above can be turned on and off and can be made to blink.

+sysfs notes:
+
+The ThinkPad LED sysfs interface is described in detail by the led class
+documentation, in Documentation/leds-class.txt.
+
+The leds are named: "tp::power", "tp:orange:battery", "tp:green:battery",
+"tp::ultrabase", "tp::ultrabay", "tp::ultrabase_batt", "tp::unknown_led",
+"tp::standby".
+
+Due to limitations in the sysfs led class, if the status of the LED
+indicators cannot be read due to an error, thinkpad-acpi will report it as
+a brightness of zero (same as LED off).
+
+If the thinkpad firmware doesn't support reading the current status, trying
+to read the current LED brightness will just return whatever brightness was
+last written to that attribute.
+
+These LEDs can blink using hardware acceleration. To request that a
+ThinkPad indicator LED blinks in hardware, use the "timer" trigger, and
+leave the delay_on and delay_off parameters set to zero (to request
+hardware acceleration autodetection).
+
ACPI sounds -- /proc/acpi/ibm/beep
----------------------------------

diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 68bd8a1..8f0ff2f 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -3233,6 +3233,19 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */
"LED", /* all others */
); /* R30, R31 */

+#define TPACPI_LED_NUMLEDS 8
+static struct led_classdev *tpacpi_leds;
+static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
+ "tp::power",
+ "tp:orange:battery",
+ "tp:green:battery",
+ "tp::ultrabase",
+ "tp::ultrabay",
+ "tp::ultrabase_batt", /* 19 char + NULL limit on sysfs */
+ "tp::unknown_led",
+ "tp::standby",
+};
+
static int led_get_status(unsigned int led)
{
int status;
@@ -3296,10 +3309,93 @@ static int led_set_status(unsigned int led, enum led_status_t ledstatus)
return rc;
}

+/*
+ * This is highly dependent on the tpacpi_leds array
+ */
+static void led_sysfs_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ unsigned int led;
+ enum led_status_t newstatus;
+
+ led = led_cdev - tpacpi_leds;
+ BUG_ON(led >= TPACPI_LED_NUMLEDS);
+
+ if (brightness == LED_OFF)
+ newstatus = TPACPI_LED_OFF;
+ else
+ newstatus = TPACPI_LED_ON;
+
+ led_set_status(led, newstatus);
+}
+
+/*
+ * This is highly dependent on the tpacpi_leds array
+ */
+static int led_sysfs_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ unsigned int led;
+
+ led = led_cdev - tpacpi_leds;
+ BUG_ON(led >= TPACPI_LED_NUMLEDS);
+
+ /* Can we choose the flash rate? */
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* yes. set them to the hardware blink rate (1 Hz) */
+ *delay_on = 500; /* ms */
+ *delay_off = 500; /* ms */
+ } else if ((*delay_on != 500) || (*delay_off != 500))
+ return -EINVAL;
+
+ led_set_status(led, TPACPI_LED_BLINK);
+
+ return 0;
+}
+
+/*
+ * This is highly dependent on the tpacpi_leds array
+ */
+static enum led_brightness led_sysfs_get(struct led_classdev *led_cdev)
+{
+ unsigned int led;
+ int rc;
+
+ led = led_cdev - tpacpi_leds;
+ BUG_ON(led >= TPACPI_LED_NUMLEDS);
+
+ rc = led_get_status(led);
+
+ if (rc == TPACPI_LED_OFF || rc < 0)
+ rc = LED_OFF; /* no error handling in led class :( */
+ else
+ rc = LED_FULL;
+
+ return rc;
+}
+
+static void led_exit(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
+ if (tpacpi_leds[i].name)
+ led_classdev_unregister(&tpacpi_leds[i]);
+ }
+
+ kfree(tpacpi_leds);
+ tpacpi_leds = NULL;
+}
+
static int __init led_init(struct ibm_init_struct *iibm)
{
+ unsigned int i;
+ int rc;
+
vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");

+ tpacpi_leds = NULL;
+
TPACPI_ACPIHANDLE_INIT(led);

if (!led_handle)
@@ -3318,6 +3414,29 @@ static int __init led_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
str_supported(led_supported), led_supported);

+ tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
+ GFP_KERNEL);
+ if (!tpacpi_leds) {
+ printk(TPACPI_ERR "Out of memory for LED data\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
+ tpacpi_leds[i].brightness_set = &led_sysfs_set;
+ tpacpi_leds[i].blink_set = &led_sysfs_blink_set;
+ if (led_supported == TPACPI_LED_570)
+ tpacpi_leds[i].brightness_get = &led_sysfs_get;
+ tpacpi_leds[i].name = tpacpi_led_names[i];
+
+ rc = led_classdev_register(&tpacpi_pdev->dev,
+ &tpacpi_leds[i]);
+ if (rc < 0) {
+ tpacpi_leds[i].name = NULL;
+ led_exit();
+ return rc;
+ }
+ }
+
return (led_supported != TPACPI_LED_NONE)? 0 : 1;
}

@@ -3388,6 +3507,7 @@ static struct ibm_struct led_driver_data = {
.name = "led",
.read = led_read,
.write = led_write,
+ .exit = led_exit,
};

/*************************************************************************
--
1.5.3.8


\
 
 \ /
  Last update: 2008-02-08 01:01    [W:0.035 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site