lkml.org 
[lkml]   [2008]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [rft] s2ram wakeup moves to .c, could fix few machines
Date
On Thursday, 7 of February 2008, Pavel Machek wrote:
> Hi!
>
> > > > > This rewrites wakeup code to .c, and it fixes stack (should use movl
> > > > > ,%esp, not movw). Testers wanted. Makefile infrastructure was done by
> > > > > hpa, cleanups by rjw.
> > > >
> > > > I'll test it tomorrow
> > >
> > > Works on my nx6325 (good sign, the box is easy to break ;-)).
> > >
> > > > and I still have some more cleanups (I was distracted by a nasty scheduler
> > > > issue in the current mainline).
> > >
> > > The cleanups are still in the works (sorry).
> >
> > Below is a version with some easy cleanups, rebased on top of the patches that
> > move the 64-bit hibernation code to arch/x86/power .
>
> Can you post a delta against my versoin? I do not see any changes from
> a quick glance.

Appended (plus I removed two hunks, one in arch/x86/Makefile and one in
drivers/acpi/sleep/main.c that were unrelated to the rest of the patch).

> This is probably more acceptable version of beep; but there are
> probably even better ways to clean it...
>
> if (wakeup_header.realmode_flags & 4) {
> inb(97);
> outb(0, 0x80);
> outb(3, 97);
> outb(0, 0x80);
> outb(-74, 67);
> outb(0, 0x80);
> outb(-119, 66);
> outb(0, 0x80);
> outb(15, 66);
> }
>
> ...like the version that makes beep/pause/beep/pause, so that user can
> count them.

Can we move it into a separate function?

Rafael

---
arch/x86/boot/video-vesa.c | 12
arch/x86/kernel/acpi/Makefile | 2
arch/x86/kernel/acpi/realmode/Makefile | 2
arch/x86/kernel/acpi/realmode/wakeup.S | 34 +-
arch/x86/kernel/acpi/wakeup.S | 1
arch/x86/kernel/acpi/wakeup_32.S | 34 +-
arch/x86/kernel/acpi/wakeup_64.S | 21 -
arch/x86/kernel/acpi/wakeup_rm.S | 2
arch/x86_64/kernel/acpi/wakeup.S | 425 ---------------------------------
9 files changed, 50 insertions(+), 483 deletions(-)

Index: linux-2.6/arch/x86_64/kernel/acpi/wakeup.S
===================================================================
--- linux-2.6.orig/arch/x86_64/kernel/acpi/wakeup.S
+++ /dev/null
@@ -1,425 +0,0 @@
-.text
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-
-# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls.
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
- inb $97, %al; \
- outb %al, $0x80; \
- movb $3, %al; \
- outb %al, $97; \
- outb %al, $0x80; \
- movb $-74, %al; \
- outb %al, $67; \
- outb %al, $0x80; \
- movb $-119, %al; \
- outb %al, $66; \
- outb %al, $0x80; \
- movb $15, %al; \
- outb %al, $66;
-
-
-ALIGN
- .align 16
-ENTRY(wakeup_start)
-wakeup_code:
- wakeup_code_start = .
- .code16
-
-# Running in *copy* of this code, somewhere in low 1MB.
-
- cli
- cld
- # setup data segment
- movw %cs, %ax
- movw %ax, %ds # Make ds:0 point to wakeup_start
- movw %ax, %ss
-
- # Data segment must be set up before we can see whether to beep.
- testl $4, realmode_flags - wakeup_code
- jz 1f
- BEEP
-1:
-
- # Private stack is needed for ASUS board
- mov $(wakeup_stack - wakeup_code), %sp
-
- pushl $0 # Kill any dangerous flags
- popfl
-
- movl real_magic - wakeup_code, %eax
- cmpl $0x12345678, %eax
- jne bogus_real_magic
-
- testl $1, realmode_flags - wakeup_code
- jz 1f
- lcall $0xc000,$3
- movw %cs, %ax
- movw %ax, %ds # Bios might have played with that
- movw %ax, %ss
-1:
-
- testl $2, realmode_flags - wakeup_code
- jz 1f
- mov video_mode - wakeup_code, %ax
- call mode_set
-1:
-
- mov %ds, %ax # Find 32bit wakeup_code addr
- movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
- shll $4, %esi
- # Fix up the vectors
- addl %esi, wakeup_32_vector - wakeup_code
- addl %esi, wakeup_long64_vector - wakeup_code
- addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
-
- lidtl %ds:idt_48a - wakeup_code
- lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is
- # appropriate
-
- movl $1, %eax # protected mode (PE) bit
- lmsw %ax # This is it!
- jmp 1f
-1:
-
- ljmpl *(wakeup_32_vector - wakeup_code)
-
- .balign 4
-wakeup_32_vector:
- .long wakeup_32 - wakeup_code
- .word __KERNEL32_CS, 0
-
- .code32
-wakeup_32:
-# Running in this code, but at low address; paging is not yet turned on.
-
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
-
- /*
- * Prepare for entering 64bits mode
- */
-
- /* Enable PAE */
- xorl %eax, %eax
- btsl $5, %eax
- movl %eax, %cr4
-
- /* Setup early boot stage 4 level pagetables */
- leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax
- movl %eax, %cr3
-
- /* Check if nx is implemented */
- movl $0x80000001, %eax
- cpuid
- movl %edx,%edi
-
- /* Enable Long Mode */
- xorl %eax, %eax
- btsl $_EFER_LME, %eax
-
- /* No Execute supported? */
- btl $20,%edi
- jnc 1f
- btsl $_EFER_NX, %eax
-
- /* Make changes effective */
-1: movl $MSR_EFER, %ecx
- xorl %edx, %edx
- wrmsr
-
- xorl %eax, %eax
- btsl $31, %eax /* Enable paging and in turn activate Long Mode */
- btsl $0, %eax /* Enable protected mode */
-
- /* Make changes effective */
- movl %eax, %cr0
-
- /* At this point:
- CR4.PAE must be 1
- CS.L must be 0
- CR3 must point to PML4
- Next instruction must be a branch
- This must be on identity-mapped page
- */
- /*
- * At this point we're in long mode but in 32bit compatibility mode
- * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
- * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- */
-
- /* Finally jump in 64bit mode */
- ljmp *(wakeup_long64_vector - wakeup_code)(%esi)
-
- .balign 4
-wakeup_long64_vector:
- .long wakeup_long64 - wakeup_code
- .word __KERNEL_CS, 0
-
-.code64
-
- /* Hooray, we are in Long 64-bit mode (but still running in
- * low memory)
- */
-wakeup_long64:
- /*
- * We must switch to a new descriptor in kernel space for the GDT
- * because soon the kernel won't have access anymore to the userspace
- * addresses where we're currently running on. We have to do that here
- * because in 32bit we couldn't load a 64bit linear address.
- */
- lgdt cpu_gdt_descr
-
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
-
- nop
- nop
- movw $__KERNEL_DS, %ax
- movw %ax, %ss
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %fs
- movw %ax, %gs
- movq saved_rsp, %rsp
-
- movq saved_rbx, %rbx
- movq saved_rdi, %rdi
- movq saved_rsi, %rsi
- movq saved_rbp, %rbp
-
- movq saved_rip, %rax
- jmp *%rax
-
-.code32
-
- .align 64
-gdta:
- /* Its good to keep gdt in sync with one in trampoline.S */
- .word 0, 0, 0, 0 # dummy
- /* ??? Why I need the accessed bit set in order for this to work? */
- .quad 0x00cf9b000000ffff # __KERNEL32_CS
- .quad 0x00af9b000000ffff # __KERNEL_CS
- .quad 0x00cf93000000ffff # __KERNEL_DS
-
-idt_48a:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
-gdt_48a:
- .word 0x800 # gdt limit=2048,
- # 256 GDT entries
- .long gdta - wakeup_code # gdt base (relocated in later)
-
-real_magic: .quad 0
-video_mode: .quad 0
-realmode_flags: .quad 0
-
-.code16
-bogus_real_magic:
- jmp bogus_real_magic
-
-.code64
-bogus_64_magic:
- jmp bogus_64_magic
-
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-.code16
-mode_set:
- movw %ax, %bx
- subb $VIDEO_FIRST_VESA>>8, %bh
- cmpb $2, %bh
- jb check_vesa
-
-setbad:
- clc
- ret
-
-check_vesa:
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
-
-wakeup_stack_begin: # Stack grows down
-
-.org 0xff0
-wakeup_stack: # Just below end of page
-
-.org 0x1000
-ENTRY(wakeup_level4_pgt)
- .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
- .fill 510,8,0
- /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(wakeup_end)
-
-##
-# acpi_copy_wakeup_routine
-#
-# Copy the above routine to low memory.
-#
-# Parameters:
-# %rdi: place to copy wakeup routine to
-#
-# Returned address is location of code in low memory (past data and stack)
-#
- .code64
-ENTRY(acpi_copy_wakeup_routine)
- pushq %rax
- pushq %rdx
-
- movl saved_video_mode, %edx
- movl %edx, video_mode - wakeup_start (,%rdi)
- movl acpi_realmode_flags, %edx
- movl %edx, realmode_flags - wakeup_start (,%rdi)
- movq $0x12345678, real_magic - wakeup_start (,%rdi)
- movq $0x123456789abcdef0, %rdx
- movq %rdx, saved_magic
-
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
-
- # restore the regs we used
- popq %rdx
- popq %rax
-ENTRY(do_suspend_lowlevel_s4bios)
- ret
-
- .align 2
- .p2align 4,,15
-.globl do_suspend_lowlevel
- .type do_suspend_lowlevel,@function
-do_suspend_lowlevel:
-.LFB5:
- subq $8, %rsp
- xorl %eax, %eax
- call save_processor_state
-
- movq %rsp, saved_context_esp(%rip)
- movq %rax, saved_context_eax(%rip)
- movq %rbx, saved_context_ebx(%rip)
- movq %rcx, saved_context_ecx(%rip)
- movq %rdx, saved_context_edx(%rip)
- movq %rbp, saved_context_ebp(%rip)
- movq %rsi, saved_context_esi(%rip)
- movq %rdi, saved_context_edi(%rip)
- movq %r8, saved_context_r08(%rip)
- movq %r9, saved_context_r09(%rip)
- movq %r10, saved_context_r10(%rip)
- movq %r11, saved_context_r11(%rip)
- movq %r12, saved_context_r12(%rip)
- movq %r13, saved_context_r13(%rip)
- movq %r14, saved_context_r14(%rip)
- movq %r15, saved_context_r15(%rip)
- pushfq ; popq saved_context_eflags(%rip)
-
- movq $.L97, saved_rip(%rip)
-
- movq %rsp,saved_rsp
- movq %rbp,saved_rbp
- movq %rbx,saved_rbx
- movq %rdi,saved_rdi
- movq %rsi,saved_rsi
-
- addq $8, %rsp
- movl $3, %edi
- xorl %eax, %eax
- jmp acpi_enter_sleep_state
-.L97:
- .p2align 4,,7
-.L99:
- .align 4
- movl $24, %eax
- movw %ax, %ds
- movq saved_context+58(%rip), %rax
- movq %rax, %cr4
- movq saved_context+50(%rip), %rax
- movq %rax, %cr3
- movq saved_context+42(%rip), %rax
- movq %rax, %cr2
- movq saved_context+34(%rip), %rax
- movq %rax, %cr0
- pushq saved_context_eflags(%rip) ; popfq
- movq saved_context_esp(%rip), %rsp
- movq saved_context_ebp(%rip), %rbp
- movq saved_context_eax(%rip), %rax
- movq saved_context_ebx(%rip), %rbx
- movq saved_context_ecx(%rip), %rcx
- movq saved_context_edx(%rip), %rdx
- movq saved_context_esi(%rip), %rsi
- movq saved_context_edi(%rip), %rdi
- movq saved_context_r08(%rip), %r8
- movq saved_context_r09(%rip), %r9
- movq saved_context_r10(%rip), %r10
- movq saved_context_r11(%rip), %r11
- movq saved_context_r12(%rip), %r12
- movq saved_context_r13(%rip), %r13
- movq saved_context_r14(%rip), %r14
- movq saved_context_r15(%rip), %r15
-
- xorl %eax, %eax
- addq $8, %rsp
- jmp restore_processor_state
-.LFE5:
-.Lfe5:
- .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
-
-.data
-ALIGN
-ENTRY(saved_rbp) .quad 0
-ENTRY(saved_rsi) .quad 0
-ENTRY(saved_rdi) .quad 0
-ENTRY(saved_rbx) .quad 0
-
-ENTRY(saved_rip) .quad 0
-ENTRY(saved_rsp) .quad 0
-
-ENTRY(saved_magic) .quad 0
Index: linux-2.6/arch/x86/kernel/acpi/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/Makefile
+++ linux-2.6/arch/x86/kernel/acpi/Makefile
@@ -8,7 +8,7 @@ obj-y += cstate.o processor.o
endif

$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin
-
+
$(obj)/realmode/wakeup.bin: FORCE
$(Q)$(MAKE) $(build)=$(obj)/realmode $@

Index: linux-2.6/arch/x86/kernel/acpi/realmode/wakeup.S
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/realmode/wakeup.S
+++ linux-2.6/arch/x86/kernel/acpi/realmode/wakeup.S
@@ -12,16 +12,14 @@
/* This should match the structure in wakeup.h */
.globl wakeup_header
wakeup_header:
-entry: .short _start /* unused */
-total: .short _end /* unused */
video_mode: .short 0 /* Video mode number */
pmode_return: .byte 0x66, 0xea /* ljmpl */
- .long 0 /* offset goes here */
+ .long 0 /* offset goes here */
.short __KERNEL_CS
-pmode_cr0: .long 0 /* Saved %cr0 */
-pmode_cr3: .long 0 /* Saved %cr3 */
-pmode_cr4: .long 0 /* Saved %cr4 */
-pmode_efer: .quad 0 /* Saved EFER */
+pmode_cr0: .long 0 /* Saved %cr0 */
+pmode_cr3: .long 0 /* Saved %cr3 */
+pmode_cr4: .long 0 /* Saved %cr4 */
+pmode_efer: .quad 0 /* Saved EFER */
pmode_gdt: .quad 0
realmode_flags: .long 0
real_magic: .long 0
@@ -37,10 +35,10 @@ _start:
cld

/* Set up segments */
- movw %cs,%ax
- movw %ax,%ds
- movw %ax,%es
- movw %ax,%ss
+ movw %cs, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss

movl $wakeup_stack_end, %esp

@@ -61,16 +59,17 @@ _start:
/* Zero the bss */
xorl %eax, %eax
movw $__bss_start, %di
- movw $__bss_end+3, %cx
+ movw $__bss_end + 3, %cx
subw %di, %cx
shrw $2, %cx
- rep; stosl
+ rep
+ stosl

/* Call the C code */
calll main

/* Do any other stuff... */
-
+
#ifndef CONFIG_64BIT
/* This could also be done in C code... */
movl pmode_cr3, %eax
@@ -81,7 +80,7 @@ _start:
movl %ecx, %cr4
1:
movl pmode_efer, %eax
- movl pmode_efer+4, %edx
+ movl pmode_efer + 4, %edx
movl %eax, %ecx
orl %edx, %ecx
jz 1f
@@ -99,14 +98,14 @@ _start:
pushw $0
pushw trampoline_segment
pushw $0
- lret
+ lret
#endif

bogus_real_magic:
1:
hlt
jmp 1b
-
+
.data
.balign 4
.globl HEAP, heap_end
@@ -121,4 +120,3 @@ wakeup_heap:
wakeup_stack:
.space 2048
wakeup_stack_end:
-
Index: linux-2.6/arch/x86/kernel/acpi/wakeup_32.S
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/wakeup_32.S
+++ linux-2.6/arch/x86/kernel/acpi/wakeup_32.S
@@ -5,8 +5,6 @@

# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2

-#include "wakeup.S"
-
.code32
ALIGN

@@ -23,7 +21,7 @@ wakeup_pmode_return:
lgdt saved_gdt
lidt saved_idt
lldt saved_ldt
- ljmp $(__KERNEL_CS),$1f
+ ljmp $(__KERNEL_CS), $1f
1:
movl %cr3, %eax
movl %eax, %cr3
@@ -37,7 +35,7 @@ wakeup_pmode_return:
jne bogus_magic

# jump to place where we left off
- movl saved_eip,%eax
+ movl saved_eip, %eax
jmp *%eax

bogus_magic:
@@ -50,26 +48,28 @@ save_registers:
sidt saved_idt
sldt saved_ldt
str saved_tss
-
+
leal 4(%esp), %eax
movl %eax, saved_context_esp
- movl %ebx, saved_context_ebx
- movl %ebp, saved_context_ebp
- movl %esi, saved_context_esi
- movl %edi, saved_context_edi
- pushfl ; popl saved_context_eflags
+ movl %ebx, saved_context_ebx
+ movl %ebp, saved_context_ebp
+ movl %esi, saved_context_esi
+ movl %edi, saved_context_edi
+ pushfl
+ popl saved_context_eflags

- movl $ret_point, saved_eip
+ movl $ret_point, saved_eip
ret


restore_registers:
- movl saved_context_ebp, %ebp
- movl saved_context_ebx, %ebx
- movl saved_context_esi, %esi
- movl saved_context_edi, %edi
- pushl saved_context_eflags ; popfl
- ret
+ movl saved_context_ebp, %ebp
+ movl saved_context_ebx, %ebx
+ movl saved_context_esi, %esi
+ movl saved_context_edi, %edi
+ pushl saved_context_eflags
+ popfl
+ ret

ENTRY(do_suspend_lowlevel)
call save_processor_state
Index: linux-2.6/arch/x86/boot/video-vesa.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/video-vesa.c
+++ linux-2.6/arch/x86/boot/video-vesa.c
@@ -24,7 +24,11 @@ static struct vesa_mode_info vminfo;

__videocard video_vesa;

+#ifndef _WAKEUP
static void vesa_store_mode_params_graphics(void);
+#else /* _WAKEUP */
+static inline void vesa_store_mode_params_graphics(void) {}
+#endif /* _WAKEUP */

static int vesa_probe(void)
{
@@ -160,15 +164,15 @@ static int vesa_set_mode(struct mode_inf
do_restore = 1;
} else {
/* Graphics mode */
-#ifndef _WAKEUP
vesa_store_mode_params_graphics();
-#endif
}

return 0;
}


+#ifndef _WAKEUP
+
/* Switch DAC to 8-bit mode */
static void vesa_dac_set_8bits(void)
{
@@ -189,7 +193,6 @@ static void vesa_dac_set_8bits(void)
}

/* Set the color sizes to the DAC size, and offsets to 0 */
-#ifndef _WAKEUP
boot_params.screen_info.red_size = dac_size;
boot_params.screen_info.green_size = dac_size;
boot_params.screen_info.blue_size = dac_size;
@@ -199,11 +202,8 @@ static void vesa_dac_set_8bits(void)
boot_params.screen_info.green_pos = 0;
boot_params.screen_info.blue_pos = 0;
boot_params.screen_info.rsvd_pos = 0;
-#endif
}

-#ifndef _WAKEUP
-
/* Save the VESA protected mode info */
static void vesa_store_pm_info(void)
{
Index: linux-2.6/arch/x86/kernel/acpi/realmode/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/realmode/Makefile
+++ linux-2.6/arch/x86/kernel/acpi/realmode/Makefile
@@ -1,5 +1,5 @@
#
-# arch/x86/kernel/acpi/rm/Makefile
+# arch/x86/kernel/acpi/realmode/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
Index: linux-2.6/arch/x86/kernel/acpi/wakeup_rm.S
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/wakeup_rm.S
+++ linux-2.6/arch/x86/kernel/acpi/wakeup_rm.S
@@ -5,6 +5,6 @@
.section ".rodata","a"
.globl wakeup_code_start, wakeup_code_end
wakeup_code_start:
- .incbin "arch/x86/kernel/acpi/rm/wakeup.bin"
+ .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin"
wakeup_code_end:
.size wakeup_code_start, .-wakeup_code_start
Index: linux-2.6/arch/x86/kernel/acpi/wakeup.S
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/wakeup.S
+++ /dev/null
@@ -1 +0,0 @@
-# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
Index: linux-2.6/arch/x86/kernel/acpi/wakeup_64.S
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/wakeup_64.S
+++ linux-2.6/arch/x86/kernel/acpi/wakeup_64.S
@@ -8,21 +8,16 @@

# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2

-#include "wakeup.S"
-
-# Running in this code, but at low address; paging is not yet turned on.
-
.code64
-
- /* Hooray, we are in Long 64-bit mode (but still running in
- * low memory)
+ /*
+ * Hooray, we are in Long 64-bit mode (but still running in low memory)
*/
ENTRY(wakeup_long64)
wakeup_long64:
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
+ movq saved_magic, %rax
+ movq $0x123456789abcdef0, %rdx
+ cmpq %rdx, %rax
+ jne bogus_64_magic

movw $__KERNEL_DS, %ax
movw %ax, %ss
@@ -41,7 +36,7 @@ wakeup_long64:
jmp *%rax

bogus_64_magic:
- jmp bogus_64_magic
+ jmp bogus_64_magic

.align 2
.p2align 4,,15
@@ -124,7 +119,7 @@ do_suspend_lowlevel:
jmp restore_processor_state
.LFE5:
.Lfe5:
- .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
+ .size do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel

.data
ALIGN

\
 
 \ /
  Last update: 2008-02-07 23:45    [W:1.198 / U:1.392 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site