lkml.org 
[lkml]   [2008]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[demo patch/RFC] sleepy linux


Sleepy linux support, demo version, but it works on my thinkpad x60 ;-).

Signed-off-by: Pavel Machek <pavel@suse.cz>

diff --git a/Documentation/power/sleepy.txt b/Documentation/power/sleepy.txt
new file mode 100644
index 0000000..a9caf05
--- /dev/null
+++ b/Documentation/power/sleepy.txt
@@ -0,0 +1,55 @@
+ Sleepy Linux
+ ~~~~~~~~~~~~
+
+Copyright 2007 Pavel Machek <pavel@suse.cz>
+ GPLv2
+
+Current Linux versions can enter suspend-to-RAM just fine, but only
+can do it on explicit request. But suspend-to-RAM is important, eating
+something like 10% of power needed for idle system. Starting suspend
+manually is not too convinient; it is not an option on multiuser
+machine, and even on single user machine, some things are not easy:
+
+1) Download this big chunk in mozilla, then go to sleep
+
+2) Compile this, then go to sleep
+
+3) You can sleep now, but wake me up in 8:30 with mp3 player
+
+Todays hardware is mostly capable of doing better: with correctly set
+up wakeups, machine can sleep and successfully pretend it is not
+sleeping -- by waking up whenever something interesting happens. Of
+course, it is easier on machines not connected to the network, and on
+notebook computers.
+
+Requirements:
+
+0) Working suspend-to-RAM, with kernel being able to bring video back.
+
+1) RTC clock that can wake up system
+
+2) Lid that can wake up a system,
+ or keyboard that can wake up system and does not loose keypress
+ or special screensaver setup
+
+3) Network card that is either down
+ or can wake up system on any packet (and not loose too many packets)
+
+How to use it
+~~~~~~~~~~~~~
+
+First, make sure your config is tiny enough that cpu sleeps at least
+five or so seconds between wakeups. You'll probably need to disable
+USB, make some kernel timers way longer than default and boot with
+init=/bin/bash.
+
+Then, enable SCSI powersave by something like:
+
+mount /sys
+echo auto > /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/power/level
+echo 3 > /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/power/autosuspend
+echo adisk > /sys/power/state
+mount / -oremount,commit=900
+
+Then, echo auto > /sys/power/state should enable sleepy support. Do it
+twice, and it will ignore open lid and sleep anyway.
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a7d50a5..4c25613 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -187,6 +187,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_stop_sched_tick();
+ detect_idle();
while (!need_resched()) {
void (*idle)(void);

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 29e71bd..0197b1f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -32,6 +32,7 @@
*
*/

+#define DEBUG
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -259,8 +260,8 @@ static void ahci_fill_cmd_slot(struct ah
u32 opts);
#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-static int ahci_pci_device_resume(struct pci_dev *pdev);
+int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+int ahci_pci_device_resume(struct pci_dev *pdev);
#endif

static struct class_device_attribute *ahci_shost_attrs[] = {
@@ -268,6 +269,41 @@ static struct class_device_attribute *ah
NULL
};

+struct pci_dev *my_pdev;
+int autosuspend_enabled;
+
+struct sleep_disabled_reason ahci_active = {
+ "ahci"
+};
+
+/* The host and its devices are all idle so we can autosuspend */
+static int autosuspend(struct Scsi_Host *host)
+{
+ if (my_pdev && autosuspend_enabled) {
+ printk("ahci: should autosuspend\n");
+ ahci_pci_device_suspend(my_pdev, PMSG_SUSPEND);
+ enable_auto_sleep(&ahci_active);
+ return 0;
+ }
+ printk("ahci: autosuspend disabled\n");
+ return -EINVAL;
+}
+
+/* The host needs to be autoresumed */
+static int autoresume(struct Scsi_Host *host)
+{
+ if (my_pdev && autosuspend_enabled) {
+ printk("ahci: should autoresume\n");
+ disable_auto_sleep(&ahci_active);
+ ahci_pci_device_resume(my_pdev);
+ return 0;
+ }
+ printk("ahci: autoresume disabled\n");
+ return -EINVAL;
+}
+
+
+
static struct scsi_host_template ahci_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -286,6 +322,8 @@ static struct scsi_host_template ahci_sh
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
.shost_attrs = ahci_shost_attrs,
+ .autosuspend = autosuspend,
+ .autoresume = autoresume,
};

static const struct ata_port_operations ahci_ops = {
@@ -1820,6 +1858,10 @@ static void ahci_thaw(struct ata_port *a

static void ahci_error_handler(struct ata_port *ap)
{
+ struct ata_host *host = ap->host;
+ int rc;
+ extern int slept;
+
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
@@ -1926,13 +1968,16 @@ static int ahci_port_suspend(struct ata_
return rc;
}

-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 ctl;
+ int ret;

- if (mesg.event == PM_EVENT_SUSPEND) {
+ printk("sleepy: ahci_pci_device_suspend start\n");
+ if (mesg.event == PM_EVENT_SUSPEND
+ || mesg.event == PM_EVENT_HIBERNATE) {
/* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
* transition of the HBA to D3 state.
@@ -1943,28 +1988,38 @@ static int ahci_pci_device_suspend(struc
readl(mmio + HOST_CTL); /* flush */
}

- return ata_pci_device_suspend(pdev, mesg);
+ ret = ata_pci_device_suspend(pdev, mesg);
+ printk("sleepy: ahci_pci_device_suspend done\n");
+ return ret;
}

-static int ahci_pci_device_resume(struct pci_dev *pdev)
+
+int ahci_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;

+ printk("sleepy: ahci_pci_device_resume start\n");
rc = ata_pci_device_do_resume(pdev);
+ printk("do_resume done\n");
if (rc)
return rc;

- if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ if (1) {
+ printk("reset_controller\n");
rc = ahci_reset_controller(host);
if (rc)
return rc;

+ printk("init_controller\n");
ahci_init_controller(host);
}

+ printk("ata_host_resume\n");
ata_host_resume(host);

+ printk("all ok\n");
+ printk("sleepy: ahci_pci_device_resume done\n");
return 0;
}
#endif
@@ -2189,6 +2244,7 @@ static void ahci_p5wdh_workaround(struct
}
}

+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
@@ -2300,8 +2356,12 @@ static int ahci_init_one(struct pci_dev
ahci_print_info(host);

pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
+
+ rc = ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
&ahci_sht);
+ pci_save_state(pdev);
+ my_pdev = pdev;
+ return rc;
}

static int __init ahci_init(void)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index beaa3a9..ee77dc9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -782,6 +782,7 @@ void ata_lpm_schedule(struct ata_port *a
}

#ifdef CONFIG_PM
+/* This disables link power management */
static void ata_lpm_enable(struct ata_host *host)
{
struct ata_link *link;
@@ -798,6 +799,7 @@ static void ata_lpm_enable(struct ata_ho
}
}

+/* This enables link power management */
static void ata_lpm_disable(struct ata_host *host)
{
int i;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 4e31071..5c40ac2 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -32,6 +32,7 @@
*
*/

+#define DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <scsi/scsi.h>
@@ -380,7 +381,7 @@ enum scsi_eh_timer_return ata_scsi_timed
* Inherited from SCSI layer (none, can sleep)
*
* RETURNS:
- * Zero.
+ * Nothing.
*/
void ata_scsi_error(struct Scsi_Host *host)
{
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1cea18f..62b3ee0 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -33,6 +33,7 @@
*
*/

+#define DEBUG
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/spinlock.h>
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index bdc03f7..268855d 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -19,6 +19,7 @@
* ancestral dependencies that the subsystem list maintains.
*/

+#define DEBUG
#include <linux/device.h>
#include <linux/kallsyms.h>
#include <linux/mutex.h>
@@ -319,6 +320,7 @@ static void unregister_dropped_devices(v
*
* Resume all the devices, unlock them all, and allow new
* devices to be registered once again.
+ * Called with interrupts disabled, may not sleep.
*/
void device_resume(void)
{
@@ -419,11 +421,6 @@ int suspend_device(struct device *dev, p
{
int error = 0;

- if (dev->power.power_state.event) {
- dev_dbg(dev, "PM: suspend %d-->%d\n",
- dev->power.power_state.event, state.event);
- }
-
if (dev->class && dev->class->suspend) {
suspend_device_dbg(dev, state, "class ");
error = dev->class->suspend(dev, state);
@@ -444,6 +441,34 @@ int suspend_device(struct device *dev, p
return error;
}

+int device_suspend_fake(pm_message_t state)
+{
+ int error = 0;
+
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_active) && error == 0) {
+ struct list_head * entry = dpm_active.prev;
+ struct device * dev = to_device(entry);
+
+ get_device(dev);
+
+ /* Check if the device got removed */
+ if (!list_empty(&dev->power.entry)) {
+ /* Move it to the dpm_off list */
+ if (!error)
+ list_move(&dev->power.entry, &dpm_off);
+ }
+ if (error)
+ printk(KERN_ERR "Could not suspend device %s: "
+ "error %d%s\n",
+ kobject_name(&dev->kobj), error,
+ error == -EAGAIN ? " (please convert to suspend_late)" : "");
+ put_device(dev);
+ }
+ mutex_unlock(&dpm_list_mtx);
+ return error;
+}
+
/**
* dpm_suspend - Suspend every device.
* @state: Power state to put each device in.
@@ -496,6 +521,8 @@ static int dpm_suspend(pm_message_t stat
*
* Go through the dpm_active list. Carefully lock each device's
* semaphore and put it in on the dpm_locked list.
+ *
+ * Must be called with disabled interrupts, may not sleep.
*/
static void lock_all_devices(void)
{
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 490918a..ed2bdf2 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -153,7 +153,7 @@ int input_register_polled_device(struct

INIT_DELAYED_WORK(&dev->work, input_polled_device_work);
if (!dev->poll_interval)
- dev->poll_interval = 500;
+ dev->poll_interval = 50000;
input->private = dev;
input->open = input_open_polled_device;
input->close = input_close_polled_device;
diff --git a/drivers/input/input.c b/drivers/input/input.c
index f02c242..7e9f46a 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -251,6 +251,11 @@ static void input_handle_event(struct in
input_pass_event(dev, type, code, value);
}

+struct sleep_disabled_reason keyboard_active = {
+ "keyboard"
+};
+
+
/**
* input_event() - report new input event
* @dev: device that generated the event
@@ -267,8 +272,14 @@ void input_event(struct input_dev *dev,
{
unsigned long flags;

- if (is_event_supported(type, dev->evbit, EV_MAX)) {
+ if ((type == EV_SW) && (code == SW_LID)) {
+ int is_closed = value;
+// printk("LID: %d\n", value);
+ if (is_closed) enable_auto_sleep(&keyboard_active);
+ else disable_auto_sleep(&keyboard_active);
+ }

+ if (is_event_supported(type, dev->evbit, EV_MAX)) {
spin_lock_irqsave(&dev->event_lock, flags);
add_input_randomness(type, code, value);
input_handle_event(dev, type, code, value);
@@ -1646,6 +1657,8 @@ static int __init input_init(void)
goto fail2;
}

+ /* FIXME: should only inc it if LID is open */
+ disable_auto_sleep(&keyboard_active);
return 0;

fail2: input_proc_exit();
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index e059f94..fadf651 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -93,7 +93,7 @@ static inline int is_intr(u8 rtc_intr)

/*----------------------------------------------------------------*/

-static int cmos_read_time(struct device *dev, struct rtc_time *t)
+int cmos_read_time(struct device *dev, struct rtc_time *t)
{
/* REVISIT: if the clock has a "century" register, use
* that instead of the heuristic in get_rtc_time().
@@ -185,7 +185,7 @@ static int cmos_read_alarm(struct device
return 0;
}

-static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
unsigned char mon, mday, hrs, min, sec;
@@ -494,6 +494,35 @@ static struct bin_attribute nvram = {
/*----------------------------------------------------------------*/

static struct cmos_rtc cmos_rtc;
+static struct device *pc_rtc_device;
+
+int set_alarm(int length)
+{
+ ssize_t retval;
+ unsigned long now, alarm;
+ struct rtc_wkalrm alm;
+
+ if (!pc_rtc_device)
+ return -EFAULT;
+ retval = cmos_read_time(pc_rtc_device, &alm.time);
+ if (retval < 0) {
+ printk("Auto sleep: can't get time?\n");
+ return retval;
+ }
+ rtc_tm_to_time(&alm.time, &now);
+ printk("Auto sleep: Now %ld\n", now);
+
+ alarm = now+length;
+ rtc_time_to_tm(alarm, &alm.time);
+
+ retval = cmos_set_alarm(pc_rtc_device, &alm);
+ if (retval < 0) {
+ printk("Auto sleep: can't set alarm.\n");
+ return retval;
+ }
+ printk("Auto sleep: Alarm set\n");
+ return 0;
+}

static irqreturn_t cmos_interrupt(int irq, void *p)
{
@@ -552,6 +581,8 @@ cmos_do_probe(struct device *dev, struct
if (cmos_rtc.dev)
return -EBUSY;

+ pc_rtc_device = dev;
+
if (!ports)
return -ENODEV;

@@ -712,7 +743,7 @@ cleanup0:

static void cmos_do_shutdown(void)
{
- unsigned char rtc_control;
+ unsigned char rtc_control;

spin_lock_irq(&rtc_lock);
rtc_control = CMOS_READ(RTC_CONTROL);
@@ -727,6 +758,7 @@ static void __exit cmos_do_remove(struct
struct cmos_rtc *cmos = dev_get_drvdata(dev);
struct resource *ports;

+ pc_rtc_device = NULL;
cmos_do_shutdown();

sysfs_remove_bin_file(&dev->kobj, &nvram);
diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c
index 4d27ccc..b0c609e 100644
--- a/drivers/rtc/rtc-sysfs.c
+++ b/drivers/rtc/rtc-sysfs.c
@@ -156,16 +156,6 @@ rtc_sysfs_set_wakealarm(struct device *d

alarm = simple_strtoul(buf, NULL, 0);
if (alarm > now) {
- /* Avoid accidentally clobbering active alarms; we can't
- * entirely prevent that here, without even the minimal
- * locking from the /dev/rtcN api.
- */
- retval = rtc_read_alarm(rtc, &alm);
- if (retval < 0)
- return retval;
- if (alm.enabled)
- return -EBUSY;
-
alm.enabled = 1;
} else {
alm.enabled = 0;
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 5393e15..25bebc1 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -340,6 +340,21 @@ static int scsi_bus_uevent(struct device
return 0;
}

+static int scsi_bus_remove(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ struct scsi_device *sdev = to_scsi_device(dev);
+ int err = 0;
+
+ /* reset the prep_fn back to the default since the
+ * driver may have altered it and it's being removed */
+ blk_queue_prep_rq(sdev->request_queue, scsi_prep_fn);
+
+ if (drv && drv->remove)
+ err = drv->remove(dev);
+
+ return 0;
+}

struct bus_type scsi_bus_type = {
.name = "scsi",
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 16add9a..9ca12d1 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1596,6 +1596,8 @@ static int sd_revalidate_disk(struct gen
return 0;
}

+struct device *my_scsi_disk;
+
/**
* sd_probe - called during driver initialization and whenever a
* new scsi device is attached to the system. It is called once
@@ -1715,6 +1717,7 @@ static int sd_probe(struct device *dev)

scsi_use_ULD_pm(sdp, 1);
scsi_autosuspend_device(sdp);
+ my_scsi_disk = dev;
return 0;

out_suspend:
@@ -1835,6 +1838,8 @@ static int sd_suspend(struct device *dev
struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
int ret = 0;

+ printk("sleepy: sd_suspend start\n");
+
if (!sdkp)
return 0; /* this can happen */

@@ -1845,14 +1850,17 @@ static int sd_suspend(struct device *dev
goto done;
}

- if (mesg.event == PM_EVENT_SUSPEND &&
- sdkp->device->manage_start_stop) {
+ if ((mesg.event == PM_EVENT_SUSPEND
+ )
+ && sdkp->device->manage_start_stop) {
sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
ret = sd_start_stop_device(sdkp, 0);
}

done:
scsi_disk_put(sdkp);
+
+ printk("sleepy: sd_suspend done\n");
return ret;
}

@@ -1861,6 +1869,8 @@ static int sd_resume(struct device *dev)
struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
int ret = 0;

+ printk("sleepy: sd_resume start\n");
+
if (!sdkp->device->manage_start_stop)
goto done;

@@ -1869,6 +1879,7 @@ static int sd_resume(struct device *dev)

done:
scsi_disk_put(sdkp);
+ printk("sleepy: sd_resume done\n");
return ret;
}

diff --git a/include/linux/ata.h b/include/linux/ata.h
index 78bbaca..df2dd4f 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -298,6 +298,13 @@ enum {
SCR_ACTIVE = 3,
SCR_NOTIFICATION = 4,

+ /* SControl subfields, each field is 4 bit wide */
+ ATA_SCTL_DET = 0, /* lsb */
+ ATA_SCTL_SPD = 1,
+ ATA_SCTL_IPM = 2,
+ ATA_SCTL_SPM = 3,
+ ATA_SCTL_PMP = 4,
+
/* SError bits */
SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */
SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */
@@ -441,8 +448,12 @@ static inline int ata_is_data(u8 prot)
#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
+#define ata_id_has_sata(id) ((id)[76] && (id)[76] != 0xffff)
#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
+#define ata_id_has_hips(id) (ata_id_has_sata(id) && ((id)[76] & (1 << 9)))
+#define ata_id_has_dips(id) (ata_id_has_sata(id) && ((id)[78] & (1 << 3)))
+#define ata_id_dips_enabled(id) (ata_id_has_sata(id) && ((id)[79] & (1 << 3)))
#define ata_id_removeable(id) ((id)[0] & (1 << 7))
#define ata_id_has_atapi_AN(id) \
( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
diff --git a/include/linux/pm.h b/include/linux/pm.h
index eccf59e..3a02c91 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -143,6 +143,9 @@ typedef struct pm_message {
* the upcoming system state (such as PCI_D3hot), and enable
* wakeup events as appropriate.
*
+ * HIBERNATE Enter a low power device state appropriate for the hibernation
+ * state (eg. ACPI S4) and enable wakeup events as appropriate.
+ *
* FREEZE Quiesce operations so that a consistent image can be saved;
* but do NOT otherwise enter a low power device state, and do
* NOT emit system wakeup events.
@@ -167,14 +170,16 @@ #define PM_EVENT_ON 0
#define PM_EVENT_FREEZE 1
#define PM_EVENT_SUSPEND 2
#define PM_EVENT_PRETHAW 3
+#define PM_EVENT_HIBERNATE 4

#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, })
#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })

struct dev_pm_info {
- pm_message_t power_state;
+ pm_message_t __deprecated power_state;
unsigned can_wakeup:1;
#ifdef CONFIG_PM_SLEEP
unsigned should_wakeup:1;
@@ -246,6 +251,24 @@ #define device_init_wakeup(dev,val) \
device_set_wakeup_enable(dev,val); \
} while(0)

+void detect_idle(void);
+void enter_auto_sleep(int length);
+extern atomic_t cpu_needed;
+
+struct sleep_disabled_reason {
+ char *text;
+};
+
+static inline void disable_auto_sleep(struct sleep_disabled_reason *reason)
+{
+ atomic_inc(&cpu_needed);
+}
+
+static inline void enable_auto_sleep(struct sleep_disabled_reason *reason)
+{
+ atomic_dec(&cpu_needed);
+}
+
/*
* Global Power Management flags
* Used to keep APM and ACPI from both being active
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index f7dfff2..e5693d6 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -5,7 +5,7 @@ endif

obj-y := main.o
obj-$(CONFIG_PM_LEGACY) += pm.o
-obj-$(CONFIG_PM_SLEEP) += process.o console.o
+obj-$(CONFIG_PM_SLEEP) += process.o console.o sleepy.o
obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o

obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
diff --git a/kernel/power/main.c b/kernel/power/main.c
index a29da58..2470e94 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -3,6 +3,7 @@
*
* Copyright (c) 2003 Patrick Mochel
* Copyright (c) 2003 Open Source Development Lab
+ * Copyright (c) 2007 Pavel Machek <pavel@suse.cz>
*
* This file is released under the GPLv2
*
@@ -22,7 +23,10 @@ #include <linux/freezer.h>
#include <linux/vmstat.h>
#include <linux/syscalls.h>

+#include <asm/percpu.h>
+
#include "power.h"
+#include "../../drivers/scsi/scsi_priv.h"

DEFINE_MUTEX(pm_mutex);

@@ -269,6 +273,7 @@ void __attribute__ ((weak)) arch_suspend
* @state: state to enter
*
* This function should be called after devices have been suspended.
+ * May not sleep.
*/
static int suspend_enter(suspend_state_t state)
{
@@ -277,6 +282,7 @@ static int suspend_enter(suspend_state_t
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());

+ printk("Device_power_down\n");
if ((error = device_power_down(PMSG_SUSPEND))) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Done;
@@ -296,6 +302,8 @@ static int suspend_enter(suspend_state_t
* suspend_devices_and_enter - suspend devices and enter the desired system
* sleep state.
* @state: state to enter
+ *
+ * Needs to be called from process state and may sleep.
*/
int suspend_devices_and_enter(suspend_state_t state)
{
@@ -339,6 +347,7 @@ int suspend_devices_and_enter(suspend_st
Finish:
if (suspend_ops->finish)
suspend_ops->finish();
+
Resume_devices:
suspend_test_start();
device_resume();
@@ -392,6 +401,8 @@ static inline int valid_state(suspend_st
* happen when we wake up.
* Then, do the setup for suspend, enter the state, and cleaup (after
* we've woken up).
+ *
+ * Needs to be called from process context, and may sleep.
*/
static int enter_state(suspend_state_t state)
{
@@ -426,6 +437,76 @@ static int enter_state(suspend_state_t s
return error;
}

+/* Returns how long it waited in ms */
+//extern long (*panic_blink)(long time);
+
+int slept;
+
+/*
+ list crying_babies?
+
+ struct one_baby {
+ list_head;
+ char *name;
+ }
+
+ struct one_baby { "morning tasks" };
+*/
+
+struct sleep_disabled_reason wakeup_tasks = {
+ "wakeup_tasks"
+};
+
+int device_suspend_fake(pm_message_t state);
+
+int
+do_auto_sleep(void)
+{
+ int error,i;
+ int state = PM_SUSPEND_MEM;
+
+ /* add baby "morning tasks" to the lists. BUG if it is not
+ the only baby */
+
+ if (slept)
+ return;
+ slept++;
+ disable_auto_sleep(&wakeup_tasks);
+// device_suspend_fake(PMSG_SUSPEND);
+ suspend_enter(state);
+
+ /* FIXME: run "morning tasks" in process context; drivers need to check why
+ machine was woken, and perhaps put themselves back to crying babies list
+ if lid was opened or something. */
+
+ enable_auto_sleep(&wakeup_tasks);
+
+#if 0
+ printk("finishing\n");
+ if (suspend_ops->finish)
+ suspend_ops->finish();
+#endif
+
+ return 0;
+}
+
+extern int set_alarm(int length);
+
+void
+enter_auto_sleep(int length)
+{
+ int error;
+
+ if (atomic_read(&cpu_needed))
+ return;
+
+ printk("Auto sleeping\n");
+ set_alarm(length);
+
+ error = do_auto_sleep();
+ if (error)
+ printk("enter auto sleep failed: %d\n", error);
+}

/**
* pm_suspend - Externally visible function for suspending system.
@@ -481,6 +562,12 @@ #endif
return (s - buf);
}

+extern struct pci_dev *my_pdev;
+extern int autosuspend_enabled;
+extern struct device *my_scsi_disk;
+extern int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+extern int ahci_pci_device_resume(struct pci_dev *pdev);
+
static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t n)
{
@@ -495,6 +582,63 @@ #endif
p = memchr(buf, '\n', n);
len = p ? p - buf : n;

+ if (len == 5 && !strncmp(buf, "adisk", len)) {
+ autosuspend_enabled = 1;
+ error = 0;
+ goto Exit;
+ }
+
+ if (len == 4 && !strncmp(buf, "down", len)) {
+ scsi_bus_suspend(my_scsi_disk, PMSG_SUSPEND);
+ ahci_pci_device_suspend(my_pdev, PMSG_SUSPEND);
+ error = 0;
+ goto Exit;
+ }
+
+ if (len == 2 && !strncmp(buf, "up", len)) {
+ ahci_pci_device_resume(my_pdev);
+ scsi_bus_resume(my_scsi_disk);
+ error = 0;
+ goto Exit;
+ }
+
+ if (len == 3 && !strncmp(buf, "now", len)) {
+ do_auto_sleep();
+ error = 0;
+ goto Exit;
+ }
+
+ if (len == 4 && !strncmp(buf, "now2", len)) {
+ suspend_devices_and_enter(PM_SUSPEND_MEM);
+ error = 0;
+ goto Exit;
+ }
+
+ if (len == 4 && !strncmp(buf, "auto", len)) {
+ static int acpi_ready = 0;
+ if (!acpi_ready) {
+ int error;
+ int state = PM_SUSPEND_MEM;
+
+ if (suspend_ops->begin) {
+ error = suspend_ops->begin(state);
+ if (error)
+ return error;
+ }
+
+ if (suspend_ops->prepare) {
+ error = suspend_ops->prepare();
+ if (error)
+ return error;
+ }
+ acpi_ready = 1;
+ }
+ atomic_dec(&cpu_needed);
+ printk("CPU needed now = %d\n", atomic_read(&cpu_needed));
+ error = 0;
+ goto Exit;
+ }
+
/* First, check if we are requested to hibernate */
if (len == 4 && !strncmp(buf, "disk", len)) {
error = hibernate();
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 700f44e..fa93da8 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -1,3 +1,6 @@
+#ifndef KERNEL_POWER_POWER_H
+#define KERNEL_POWER_POWER_H
+
#include <linux/suspend.h>
#include <linux/suspend_ioctls.h>
#include <linux/utsname.h>
@@ -225,3 +228,4 @@ static inline void suspend_thaw_processe
{
}
#endif
+#endif
diff --git a/kernel/power/sleepy.c b/kernel/power/sleepy.c
new file mode 100644
index 0000000..45a178c
--- /dev/null
+++ b/kernel/power/sleepy.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2007 Pavel Machek <pavel@suse.cz>
+ *
+ * This file is released under the GPLv2
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/suspend.h>
+#include <linux/kobject.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/cpu.h>
+#include <linux/resume-trace.h>
+#include <linux/freezer.h>
+#include <linux/vmstat.h>
+#include <linux/syscalls.h>
+#include <linux/rtc.h>
+#include <linux/kthread.h>
+
+#include <asm/percpu.h>
+
+#include "power.h"
+
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index d3d94c1..0fab3ca 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -287,3 +287,87 @@ static int __init init_timer_list_procfs
return 0;
}
__initcall(init_timer_list_procfs);
+
+/*
+ * Sleepy linux support
+ */
+
+#include <linux/suspend.h>
+#include <asm/atomic.h>
+
+atomic_t cpu_needed = ATOMIC_INIT(1);
+
+static s64
+detect_active_timers(struct hrtimer_clock_base *base, s64 first_timer)
+{
+ struct hrtimer *timer, tmp;
+ unsigned long next = 0, i;
+ struct rb_node *curr;
+ unsigned long flags;
+
+next_one:
+ i = 0;
+ spin_lock_irqsave(&base->cpu_base->lock, flags);
+
+ curr = base->first;
+ /*
+ * Crude but we have to do this O(N*N) thing, because
+ * we have to unlock the base when printing:
+ */
+ while (curr && i < next) {
+ curr = rb_next(curr);
+ i++;
+ }
+
+ if (curr) {
+ timer = rb_entry(curr, struct hrtimer, node);
+ tmp = *timer;
+ spin_unlock_irqrestore(&base->cpu_base->lock, flags);
+
+// printk("[%Ld]", ktime_to_ns(tmp.expires));
+ first_timer = min_t(s64, first_timer, ktime_to_ns(tmp.expires));
+
+ next++;
+ goto next_one;
+ }
+ spin_unlock_irqrestore(&base->cpu_base->lock, flags);
+ return first_timer;
+}
+
+void detect_idle(void)
+{
+ int i;
+ s64 first_timer = (3600ULL*NSEC_PER_SEC);
+ int cpu;
+ s64 now;
+
+
+ /*
+ * Other CPUs could be non-idle, leading to nastiness:
+ *
+ * 1) they could be running timer code, and we would mistakenly call them idle
+ *
+ * 2) we can't sleep in SMP mode, anyway
+ */
+ if (num_online_cpus() != 1)
+ return;
+
+ if (atomic_read(&cpu_needed) > 1)
+ return;
+
+ for_each_online_cpu(cpu) {
+ struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
+ for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
+// printk("_");
+ first_timer = detect_active_timers(cpu_base->clock_base + i, first_timer);
+ }
+ }
+ now = ktime_to_ns(ktime_get());
+ if (first_timer > (now + 3ULL*NSEC_PER_SEC)) {
+ long long seconds = ((long long) first_timer - (long long) now);
+
+ do_div(seconds, NSEC_PER_SEC);
+ printk("nohz: Ready for ~ %Ld msec (%Ld sec) wait, %d\n", (long long) first_timer - (long long) now, seconds, atomic_read(&cpu_needed));
+ enter_auto_sleep(seconds-1);
+ }
+}
diff --git a/mm/slab.c b/mm/slab.c
index 473e6c2..87b7f06 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -944,7 +944,7 @@ static void __cpuinit start_cpu_timer(in
init_reap_node(cpu);
INIT_DELAYED_WORK(reap_work, cache_reap);
schedule_delayed_work_on(cpu, reap_work,
- __round_jiffies_relative(HZ, cpu));
+ __round_jiffies_relative(HZ*10000, cpu)); /* FIXME !*/
}
}

diff --git a/mm/vmstat.c b/mm/vmstat.c
index 422d960..ce25ad1 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -793,7 +793,7 @@ #endif /* CONFIG_PROC_FS */

#ifdef CONFIG_SMP
static DEFINE_PER_CPU(struct delayed_work, vmstat_work);
-int sysctl_stat_interval __read_mostly = HZ;
+int sysctl_stat_interval __read_mostly = 10000 * HZ;

static void vmstat_update(struct work_struct *w)
{
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2008-02-26 18:19    [W:1.264 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site