lkml.org 
[lkml]   [2008]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: acpi dsts loading and populate_rootfs
From
Date
On Fri, 2008-02-22 at 09:51 +0100, Thomas Renninger wrote:
> On Thu, 2008-02-21 at 19:46 +0100, Éric Piel wrote:
> > 12/02/08 06:37, Christoph Hellwig wrote/a écrit:
> > > [skipping the populate_rootfs discussion as it seems you have a better
> > > handle on that than me]
> > >
> > > On Sun, Feb 10, 2008 at 12:58:09PM +0100, Eric Piel wrote:
> > >>> And while we're at it the file reading thing in there is utter crap
> > >>> aswell. You really should be using the firmware loader which works
> > >>> perfectly fine if you initramfs is set up for it. So please folks,
> > >>> back to the drawing board, do it properly and send it out to lkml
> > >>> for review please.
> > >> Christoph, if you have seen this part of the code, you have probably
> > >> also read the big fat warning explaining why this cannot be done by
> > >> firmware loader (ie: userspace cannot be run at this early time,
> > >> corresponding to acpi_early_init()). However, you probably know the
> > >> kernel ten times better than me. Could you explain what I misunderstood
> > >> when writing this warning, and give me some hints about how to use the
> > >> firmware loader in this case?
> > >
> > > Sorry, I misparsed the comment. I took it for the usual I'm too lazy
> > > to put something that could load firmware into initramfs excuse.
> > >
> > > But thinking about it is there a reason acpi initialization needs to
> > > happen so early that we can't even have userspace in initramfs running?
>
> Maybe you do not need to activate ACPI mode yet, but you need to load
> the tables early.
Forget that one, the tables are fetched much earlier...

Thomas
>
> > Hi,
> > I guess in the complete absolute point of view it's possible to run
> > userspace without ACPI, after all that's what happens if you don't
> > activate ACPI in your kernel. However, so far I've taken the init order
> > as a constant. I'd really prefer not to have to mess with a complete
> > init order reorganization ;-)
>
> Which is probably a good idea.
> AFAIK Numa, possibly Apic tables must be available quite early.
>
> Thomas
>
> > >
> > > But if we can't use real userspace this could should at least be written
> > > like the pseudo-userspace in init/do_mounts*.c, using the sys_ syscall
> > > implementations.
> > Yes, thank you very much for the links. Attached is a patch that does
> > this.
> >
> > >
> > > As an additional comment the stat + open approach is racy and not a good
> > > idea. Please just open the file using sys_open, it will tell you
> > > if the file doesn't exist and then use fstat on it to find the
> > > length. It would also be useful if this kind of code is not hidden
> > > inside acpi but rather done somewhere close to the early init code
> > > because that's where people would expect this kind of nastiness.
> > The attached patch also fixes the stat + open order.
> >
> > Concerning the place of the code, I've tried to find a better place.
> > However, as acpi_early_init(), from which this function is called, is
> > placed in driver/acpi/ and the acpi_find_dsdt_initrd() function contains
> > quite a few references to acpi code it really looked strange to move it
> > out from the current file. If you still think it make much more sense to
> > move it somewhere else, could you hint me about which you would think it
> > fit better in?
> >
> > In the mean time, here is a patch which should get the situation already
> > much cleaner. It has been tested on various configs (with and without
> > DSDT). Let me know if you think it is acceptable.
> >
> > See you,
> > Eric
> >
> > ---
> > Use userland-like functions for reading the ACPI table
> >
> > As recommended by Christoph Hellwig, even if we can't rely on the userspace
> > firmware loader so early at boot, at least use normal syscall (as in
> > init/do_mounts_*.c). Similarly, use kfree() instead of ACPI_FREE().
> >
> > Also, it's recommended to open the file before stating it, to avoid surprises.
> > ---
> > drivers/acpi/osl.c | 33 +++++++++++++++------------------
> > 1 files changed, 15 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
> > index 34b3386..b836305 100644
> > --- a/drivers/acpi/osl.c
> > +++ b/drivers/acpi/osl.c
> > @@ -42,6 +42,7 @@
> > #include <acpi/acpi_bus.h>
> > #include <acpi/processor.h>
> > #include <asm/uaccess.h>
> > +#include <linux/syscalls.h>
> >
> > #include <linux/efi.h>
> > #include <linux/ioport.h>
> > @@ -327,8 +328,7 @@ acpi_os_predefined_override(const struct acpi_predefined_names *init_val,
> > #ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD
> > static struct acpi_table_header *acpi_find_dsdt_initrd(void)
> > {
> > - struct file *firmware_file;
> > - mm_segment_t oldfs;
> > + int fd;
> > unsigned long len, len2;
> > struct acpi_table_header *dsdt_buffer, *ret = NULL;
> > struct kstat stat;
> > @@ -342,20 +342,21 @@ struct acpi_table_header *acpi_find_dsdt_initrd(void)
> > * But this code must be run before there is any userspace available.
> > * A static/init firmware infrastructure doesn't exist yet...
> > */
> > - if (vfs_stat(ramfs_dsdt_name, &stat) < 0)
> > - return ret;
> > + fd = sys_open(ramfs_dsdt_name, O_RDONLY, 0);
> > + if (fd < 0)
> > + return ret; /* No need for warning, no DSDT override is normal */
> > +
> > + /* There exists 3 different sys_fstat's, all are wrapper to vfs_fstat */
> > + if (vfs_fstat(fd, &stat) < 0) {
> > + printk(KERN_ERR PREFIX "Failed to stat %s.\n", ramfs_dsdt_name);
> > + goto err;
> > + }
> >
> > len = stat.size;
> > /* check especially against empty files */
> > if (len <= 4) {
> > printk(KERN_ERR PREFIX "Failed: DSDT only %lu bytes.\n", len);
> > - return ret;
> > - }
> > -
> > - firmware_file = filp_open(ramfs_dsdt_name, O_RDONLY, 0);
> > - if (IS_ERR(firmware_file)) {
> > - printk(KERN_ERR PREFIX "Failed to open %s.\n", ramfs_dsdt_name);
> > - return ret;
> > + goto err;
> > }
> >
> > dsdt_buffer = kmalloc(len, GFP_ATOMIC);
> > @@ -364,15 +365,11 @@ struct acpi_table_header *acpi_find_dsdt_initrd(void)
> > goto err;
> > }
> >
> > - oldfs = get_fs();
> > - set_fs(KERNEL_DS);
> > - len2 = vfs_read(firmware_file, (char __user *)dsdt_buffer, len,
> > - &firmware_file->f_pos);
> > - set_fs(oldfs);
> > + len2 = sys_read(fd, (char __user *)dsdt_buffer, len);
> > if (len2 < len) {
> > printk(KERN_ERR PREFIX "Failed to read %lu bytes from %s.\n",
> > len, ramfs_dsdt_name);
> > - ACPI_FREE(dsdt_buffer);
> > + kfree(dsdt_buffer);
> > goto err;
> > }
> >
> > @@ -380,7 +377,7 @@ struct acpi_table_header *acpi_find_dsdt_initrd(void)
> > len, ramfs_dsdt_name);
> > ret = dsdt_buffer;
> > err:
> > - filp_close(firmware_file, NULL);
> > + sys_close(fd);
> > return ret;
> > }
> > #endif
> >

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-02-22 10:09    [W:1.543 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site