lkml.org 
[lkml]   [2008]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 08/14] [ISDN] HiSax telespci: convert to PCI hotplug API
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
drivers/isdn/hisax/Kconfig | 4 +-
drivers/isdn/hisax/Makefile | 2 +-
drivers/isdn/hisax/config.c | 21 +--------
drivers/isdn/hisax/telespci.c | 95 ++++++++++++++++++++++++++++++++---------
4 files changed, 81 insertions(+), 41 deletions(-)

diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 508bc2b..4f98afb 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -108,8 +108,8 @@ config HISAX_16_3
non-standard IRQ/port settings.

config HISAX_TELESPCI
- bool "Teles PCI"
- depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+ tristate "Teles PCI"
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the Teles PCI.
See <file:Documentation/isdn/README.HiSax> on how to configure it.
diff --git a/drivers/isdn/hisax/Makefile b/drivers/isdn/hisax/Makefile
index 07aaba5..beb2c24 100644
--- a/drivers/isdn/hisax/Makefile
+++ b/drivers/isdn/hisax/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_HISAX_HFC_PCI) += hfc_pci.o libhisax.o
obj-$(CONFIG_HISAX_W6692) += w6692.o libhisax.o
obj-$(CONFIG_HISAX_NETJET) += netjet_s.o libhisax.o
obj-$(CONFIG_HISAX_NETJET_U) += netjet_u.o libhisax.o
+obj-$(CONFIG_HISAX_TELESPCI) += telespci.o libhisax.o

bkm_a4t_pci-y := bkm_a4t.o jade.o
enternow-y := enternow_pci.o amd7930_fn.o
@@ -45,7 +46,6 @@ hisax-$(CONFIG_HISAX_1TR6) += l3_1tr6.o

hisax-$(CONFIG_HISAX_16_0) += teles0.o
hisax-$(CONFIG_HISAX_16_3) += teles3.o
-hisax-$(CONFIG_HISAX_TELESPCI) += telespci.o
hisax-$(CONFIG_HISAX_S0BOX) += s0box.o
hisax-$(CONFIG_HISAX_AVM_A1) += avm_a1.o
hisax-$(CONFIG_HISAX_AVM_A1_PCMCIA) += avm_a1p.o
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index f35ceea..1df8c08 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -145,13 +145,6 @@ const char *CardType[] = {
#define DEFAULT_CFG {15,0xd0000,0xd80,0}
#endif

-#ifdef CONFIG_HISAX_TELESPCI
-#undef DEFAULT_CARD
-#undef DEFAULT_CFG
-#define DEFAULT_CARD ISDN_CTYPE_TELESPCI
-#define DEFAULT_CFG {0,0,0,0}
-#endif
-
#ifdef CONFIG_HISAX_IX1MICROR2
#undef DEFAULT_CARD
#undef DEFAULT_CFG
@@ -421,10 +414,6 @@ extern int setup_teles3(struct IsdnCard *card);
extern int setup_s0box(struct IsdnCard *card);
#endif

-#if CARD_TELESPCI
-extern int setup_telespci(struct IsdnCard *card);
-#endif
-
#if CARD_AVM_A1
extern int setup_avm_a1(struct IsdnCard *card);
#endif
@@ -796,11 +785,6 @@ static int __devinit hisax_cs_setup_card(struct IsdnCard *card)
ret = setup_s0box(card);
break;
#endif
-#if CARD_TELESPCI
- case ISDN_CTYPE_TELESPCI:
- ret = setup_telespci(card);
- break;
-#endif
#if CARD_AVM_A1
case ISDN_CTYPE_A1:
ret = setup_avm_a1(card);
@@ -907,6 +891,7 @@ static int __devinit hisax_cs_setup_card(struct IsdnCard *card)
case ISDN_CTYPE_W6692:
case ISDN_CTYPE_NETJET_S:
case ISDN_CTYPE_NETJET_U:
+ case ISDN_CTYPE_TELESPCI:
printk(KERN_WARNING "HiSax: Support for %s Card has moved "
"to separate PCI driver module\n",
CardType[card->typ]);
@@ -1368,7 +1353,6 @@ static int __init HiSax_init(void)
cards[j].para[2] = mem[i];
break;
case ISDN_CTYPE_ELSA_PCI:
- case ISDN_CTYPE_TELESPCI:
break;

/* the following block are excluded from std HiSax init */
@@ -1378,6 +1362,7 @@ static int __init HiSax_init(void)
case ISDN_CTYPE_W6692:
case ISDN_CTYPE_NETJET_S:
case ISDN_CTYPE_NETJET_U:
+ case ISDN_CTYPE_TELESPCI:
break;

case ISDN_CTYPE_SCT_QUADRO:
@@ -1876,7 +1861,7 @@ static struct pci_device_id hisax_pci_tbl[] __devinitdata = {
#ifdef CONFIG_HISAX_SEDLBAUER
{PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100, PCI_ANY_ID,PCI_ANY_ID},
#endif
-#if defined(CONFIG_HISAX_TELESPCI) || defined(CONFIG_HISAX_SCT_QUADRO)
+#if defined(CONFIG_HISAX_SCT_QUADRO)
{PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, PCI_ANY_ID,PCI_ANY_ID},
#endif
{ } /* Terminating entry */
diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index 28b08de..fba6c78 100644
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -14,11 +14,14 @@

#include <linux/init.h>
#include "hisax.h"
+#include "hisax_proto.h"
#include "isac.h"
#include "hscx.h"
#include "isdnl1.h"
#include <linux/pci.h>

+static int teles_protocol; /* 0 == use DEFAULT_PROTO */
+
static const char *telespci_revision = "$Revision: 2.23.2.3 $";

#define ZORAN_PO_RQ_PEN 0x02000000
@@ -283,12 +286,11 @@ TelesPCI_card_msg(struct IsdnCardState *cs, int mt, void *arg)
return(0);
}

-static struct pci_dev *dev_tel __devinitdata = NULL;
-
-int __devinit
+static int __devinit
setup_telespci(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
+ struct pci_dev *dev_tel = (void *) card->para[0];
char tmp[64];

#ifdef __BIG_ENDIAN
@@ -297,26 +299,24 @@ setup_telespci(struct IsdnCard *card)

strcpy(tmp, telespci_revision);
printk(KERN_INFO "HiSax: Teles/PCI driver Rev. %s\n", HiSax_getrev(tmp));
- if (cs->typ != ISDN_CTYPE_TELESPCI)
- return (0);
+ WARN_ON(cs->typ != ISDN_CTYPE_TELESPCI);

- if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
- if (pci_enable_device(dev_tel))
- return(0);
- cs->irq = dev_tel->irq;
- if (!cs->irq) {
- printk(KERN_WARNING "Teles: No IRQ for PCI card found\n");
- return(0);
- }
- cs->hw.teles0.membase = ioremap(pci_resource_start(dev_tel, 0),
- PAGE_SIZE);
- printk(KERN_INFO "Found: Zoran, base-address: 0x%llx, irq: 0x%x\n",
- (unsigned long long)pci_resource_start(dev_tel, 0),
- dev_tel->irq);
- } else {
- printk(KERN_WARNING "TelesPCI: No PCI card found\n");
+ if (pci_enable_device(dev_tel))
+ return(0);
+ cs->irq = dev_tel->irq;
+ if (!cs->irq) {
+ printk(KERN_WARNING "Teles: No IRQ for PCI card found\n");
return(0);
}
+ cs->hw.teles0.membase = ioremap(pci_resource_start(dev_tel, 0),
+ PAGE_SIZE);
+ if (!cs->hw.teles0.membase) {
+ printk(KERN_WARNING "Teles: ioremap failed\n");
+ return(0);
+ }
+ printk(KERN_INFO "Found: Zoran, base-address: 0x%llx, irq: 0x%x\n",
+ (unsigned long long)pci_resource_start(dev_tel, 0),
+ dev_tel->irq);

/* Initialize Zoran PCI controller */
writel(0x00000000, cs->hw.teles0.membase + 0x28);
@@ -352,3 +352,58 @@ setup_telespci(struct IsdnCard *card)
}
return (1);
}
+
+static int __devinit teles_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct IsdnCard icard = { ISDN_CTYPE_TELESPCI, };
+ int cardnr;
+
+ icard.para[0] = (unsigned long) pdev;
+ icard.para[1] = ent->driver_data;
+ if (!teles_protocol)
+ icard.protocol = DEFAULT_PROTO;
+ else
+ icard.protocol = teles_protocol;
+
+ cardnr = hisax_init_hotplug(&icard, setup_telespci);
+ if (cardnr < 0)
+ return -ENODEV;
+
+ pci_set_drvdata(pdev, (void *)(unsigned long) cardnr);
+ return 0;
+}
+
+static struct pci_device_id teles_pci_table[] = {
+ { PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120,
+ PCI_ANY_ID, PCI_ANY_ID, },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver teles_pci_driver = {
+ .name = "telespci",
+ .id_table = teles_pci_table,
+ .probe = teles_pci_init_one,
+ .remove = hisax_pci_remove_one,
+};
+
+static int __init teles_mod_init(void)
+{
+ return pci_register_driver(&teles_pci_driver);
+}
+
+static void __exit teles_mod_exit(void)
+{
+ pci_unregister_driver(&teles_pci_driver);
+}
+
+module_init(teles_mod_init);
+module_exit(teles_mod_exit);
+
+module_param_named(protocol, teles_protocol, int, 0444);
+MODULE_PARM_DESC(protocol, "Values 0 (default) through 4. See ISDN_PTYPE_xxx in linux/isdnif.h");
+
+MODULE_DEVICE_TABLE(pci, teles_pci_table);
+MODULE_DESCRIPTION("ISDN HiSax Teles PCI driver");
+MODULE_LICENSE("GPL");
--
1.5.3.8


\
 
 \ /
  Last update: 2008-02-16 21:35    [W:0.088 / U:6.528 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site