lkml.org 
[lkml]   [2008]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[git patches] net driver fixes
Process note:  'upstream-davem' continues the git history that began
the previous push. This sometimes happens when I continue to commit
locally, working in parallel while waiting for changes to hit Linus
upstream.

As current net-2.6.git appears to have the same commit ids that I
submitted in the previous push, this should be no problem at all,
just wanted you to know.

Please pull from 'upstream-davem' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-davem

to receive the following updates:

drivers/net/e1000/e1000_ethtool.c | 2 +-
drivers/net/e1000/e1000_main.c | 8 ++++
drivers/net/e1000e/netdev.c | 34 ++---------------
drivers/net/gianfar.c | 4 +-
drivers/net/gianfar_mii.c | 4 +-
drivers/net/hamradio/mkiss.c | 5 +--
drivers/net/igb/igb_ethtool.c | 2 +-
drivers/net/igb/igb_main.c | 28 --------------
drivers/net/ixgb/ixgb_ethtool.c | 2 +-
drivers/net/ixgbe/ixgbe_main.c | 41 +++++++++++++++++----
drivers/net/pcmcia/smc91c92_cs.c | 12 +++++-
drivers/net/tsi108_eth.c | 72 +++++++++++++++++++++++++-----------
12 files changed, 114 insertions(+), 100 deletions(-)

Al Viro (1):
gianfar iomem misannotations

Alex Bounine (5):
Tsi108_eth: add missing linking to driver data
Tsi108_eth: fix detection of 1000Mb mode
Tsi108_eth: remove not needed code
Tsi108_eth: fix link recovery after disconnect
Tsi108_eth: Add ethtool support

Auke Kok (7):
e1000: warn if this driver is used for e1000e devices
e1000e: Fix logic reversal keeping link active
ixgbe: warn when device is in a x4 or lower width slot
ixgbe: Disallow device reset during ethtool test
ixgbe: remove accidentally added #ifdef
e1000e: Fix CRC stripping in hardware context bug
ixgbe: Correctly obtain protocol information on transmit

Chuck Ebbert (1):
Fix station address detection in smc

David Graham (2):
igb: PCIe devices do not need to unset MANC_ARP_ENA
e1000e: PCIe devices do not need to unset MANC_ARP_ENA

Jarek Poplawski (1):
mkiss: ax_bump() locking fix

Julia Lawall (1):
replace code with FIELD_SIZEOF

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index d876787..85e66f4 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -50,7 +50,7 @@ struct e1000_stats {
int stat_offset;
};

-#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
+#define E1000_STAT(m) FIELD_SIZEOF(struct e1000_adapter, m), \
offsetof(struct e1000_adapter, m)
static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_packets", E1000_STAT(stats.gprc) },
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index d4ee8ec..0991648 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1195,6 +1195,14 @@ e1000_probe(struct pci_dev *pdev,

printk("%s\n", print_mac(mac, netdev->dev_addr));

+ if (adapter->hw.bus_type == e1000_bus_type_pci_express) {
+ DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no "
+ "longer be supported by this driver in the future.\n",
+ pdev->vendor, pdev->device);
+ DPRINTK(PROBE, WARNING, "please use the \"e1000e\" "
+ "driver instead.\n");
+ }
+
/* reset the hardware with the new settings */
e1000_reset(adapter);

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index f58f017..3031d6d 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1055,23 +1055,6 @@ static void e1000_release_hw_control(struct e1000_adapter *adapter)
}
}

-static void e1000_release_manageability(struct e1000_adapter *adapter)
-{
- if (adapter->flags & FLAG_MNG_PT_ENABLED) {
- struct e1000_hw *hw = &adapter->hw;
-
- u32 manc = er32(MANC);
-
- /* re-enable hardware interception of ARP */
- manc |= E1000_MANC_ARP_EN;
- manc &= ~E1000_MANC_EN_MNG2HOST;
-
- /* don't explicitly have to mess with MANC2H since
- * MANC has an enable disable that gates MANC2H */
- ew32(MANC, manc);
- }
-}
-
/**
* @e1000_alloc_ring - allocate memory for a ring structure
**/
@@ -1561,9 +1544,6 @@ static void e1000_init_manageability(struct e1000_adapter *adapter)

manc = er32(MANC);

- /* disable hardware interception of ARP */
- manc &= ~(E1000_MANC_ARP_EN);
-
/* enable receiving management packets to the host. this will probably
* generate destination unreachable messages from the host OS, but
* the packets will be handled on SMBUS */
@@ -1690,6 +1670,9 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
else
rctl |= E1000_RCTL_LPE;

+ /* Enable hardware CRC frame stripping */
+ rctl |= E1000_RCTL_SECRC;
+
/* Setup buffer sizes */
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
@@ -1755,9 +1738,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)

/* Enable Packet split descriptors */
rctl |= E1000_RCTL_DTYP_PS;
-
- /* Enable hardware CRC frame stripping */
- rctl |= E1000_RCTL_SECRC;

psrctl |= adapter->rx_ps_bsize0 >>
E1000_PSRCTL_BSIZE0_SHIFT;
@@ -2008,7 +1988,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
u16 mii_reg;

/* WoL is enabled */
- if (!adapter->wol)
+ if (adapter->wol)
return;

/* non-copper PHY? */
@@ -2140,8 +2120,6 @@ void e1000e_reset(struct e1000_adapter *adapter)
phy_data &= ~IGP02E1000_PM_SPD;
e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
}
-
- e1000_release_manageability(adapter);
}

int e1000e_up(struct e1000_adapter *adapter)
@@ -3487,8 +3465,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
pci_enable_wake(pdev, PCI_D3cold, 0);
}

- e1000_release_manageability(adapter);
-
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->flags & FLAG_MNG_PT_ENABLED) {
pci_enable_wake(pdev, PCI_D3hot, 1);
@@ -4054,8 +4030,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev)

flush_scheduled_work();

- e1000_release_manageability(adapter);
-
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
e1000_release_hw_control(adapter);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 0431e9e..4244fc2 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -130,8 +130,8 @@ static void free_skb_resources(struct gfar_private *priv);
static void gfar_set_multi(struct net_device *dev);
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
static void gfar_configure_serdes(struct net_device *dev);
-extern int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, int regnum, u16 value);
-extern int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum);
+extern int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value);
+extern int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum);
#ifdef CONFIG_GFAR_NAPI
static int gfar_poll(struct napi_struct *napi, int budget);
#endif
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index 6a647d9..2432762 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -51,7 +51,7 @@
* the local mdio pins, which may not be the same as system mdio bus, used for
* controlling the external PHYs, for example.
*/
-int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id,
+int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id,
int regnum, u16 value)
{
/* Set the PHY address and the register address we want to write */
@@ -77,7 +77,7 @@ int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id,
* and are always tied to the local mdio pins, which may not be the
* same as system mdio bus, used for controlling the external PHYs, for eg.
*/
-int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum)
+int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum)

{
u16 value;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index cfcd15a..30c9b3b 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -289,7 +289,6 @@ static void ax_bump(struct mkiss *ax)
*ax->rbuff &= ~0x20;
}
}
- spin_unlock_bh(&ax->buflock);

count = ax->rcount;

@@ -297,17 +296,17 @@ static void ax_bump(struct mkiss *ax)
printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n",
ax->dev->name);
ax->stats.rx_dropped++;
+ spin_unlock_bh(&ax->buflock);
return;
}

- spin_lock_bh(&ax->buflock);
memcpy(skb_put(skb,count), ax->rbuff, count);
- spin_unlock_bh(&ax->buflock);
skb->protocol = ax25_type_trans(skb, ax->dev);
netif_rx(skb);
ax->dev->last_rx = jiffies;
ax->stats.rx_packets++;
ax->stats.rx_bytes += count;
+ spin_unlock_bh(&ax->buflock);
}

static void kiss_unesc(struct mkiss *ax, unsigned char s)
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index f69721e..0447f9b 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -43,7 +43,7 @@ struct igb_stats {
int stat_offset;
};

-#define IGB_STAT(m) sizeof(((struct igb_adapter *)0)->m), \
+#define IGB_STAT(m) FIELD_SIZEOF(struct igb_adapter, m), \
offsetof(struct igb_adapter, m)
static const struct igb_stats igb_gstrings_stats[] = {
{ "rx_packets", IGB_STAT(stats.gprc) },
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index d4eb8e2..bff280e 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -606,9 +606,6 @@ static void igb_init_manageability(struct igb_adapter *adapter)
u32 manc2h = rd32(E1000_MANC2H);
u32 manc = rd32(E1000_MANC);

- /* disable hardware interception of ARP */
- manc &= ~(E1000_MANC_ARP_EN);
-
/* enable receiving management packets to the host */
/* this will probably generate destination unreachable messages
* from the host OS, but the packets will be handled on SMBUS */
@@ -623,25 +620,6 @@ static void igb_init_manageability(struct igb_adapter *adapter)
}
}

-static void igb_release_manageability(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->en_mng_pt) {
- u32 manc = rd32(E1000_MANC);
-
- /* re-enable hardware interception of ARP */
- manc |= E1000_MANC_ARP_EN;
- manc &= ~E1000_MANC_EN_MNG2HOST;
-
- /* don't explicitly have to mess with MANC2H since
- * MANC has an enable disable that gates MANC2H */
-
- /* XXX stop the hardware watchdog ? */
- wr32(E1000_MANC, manc);
- }
-}
-
/**
* igb_configure - configure the hardware for RX and TX
* @adapter: private board structure
@@ -844,7 +822,6 @@ void igb_reset(struct igb_adapter *adapter)

igb_reset_adaptive(&adapter->hw);
adapter->hw.phy.ops.get_phy_info(&adapter->hw);
- igb_release_manageability(adapter);
}

/**
@@ -1178,9 +1155,6 @@ static void __devexit igb_remove(struct pci_dev *pdev)

flush_scheduled_work();

-
- igb_release_manageability(adapter);
-
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
igb_release_hw_control(adapter);
@@ -3955,8 +3929,6 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
pci_enable_wake(pdev, PCI_D3cold, 0);
}

- igb_release_manageability(adapter);
-
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->en_mng_pt) {
pci_enable_wake(pdev, PCI_D3hot, 1);
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index a267dd8..53a9fd0 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -49,7 +49,7 @@ struct ixgb_stats {
int stat_offset;
};

-#define IXGB_STAT(m) sizeof(((struct ixgb_adapter *)0)->m), \
+#define IXGB_STAT(m) FIELD_SIZEOF(struct ixgb_adapter, m), \
offsetof(struct ixgb_adapter, m)
static struct ixgb_stats ixgb_gstrings_stats[] = {
{"rx_packets", IXGB_STAT(net_stats.rx_packets)},
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index ead49e5..23d0a4a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -220,7 +220,6 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
tx_ring->stats.bytes += tx_buffer_info->length;
if (cleaned) {
struct sk_buff *skb = tx_buffer_info->skb;
-#ifdef NETIF_F_TSO
unsigned int segs, bytecount;
segs = skb_shinfo(skb)->gso_segs ?: 1;
/* multiply data chunks by size of headers */
@@ -228,10 +227,6 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
skb->len;
total_tx_packets += segs;
total_tx_bytes += bytecount;
-#else
- total_tx_packets++;
- total_tx_bytes += skb->len;
-#endif
}
ixgbe_unmap_and_free_tx_resource(adapter,
tx_buffer_info);
@@ -1942,6 +1937,10 @@ static int ixgbe_open(struct net_device *netdev)
int err;
u32 num_rx_queues = adapter->num_rx_queues;

+ /* disallow open during test */
+ if (test_bit(__IXGBE_TESTING, &adapter->state))
+ return -EBUSY;
+
try_intr_reinit:
/* allocate transmit descriptors */
err = ixgbe_setup_all_tx_resources(adapter);
@@ -2278,11 +2277,29 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
IXGBE_ADVTXD_DTYP_CTXT);

if (skb->ip_summed == CHECKSUM_PARTIAL) {
- if (skb->protocol == htons(ETH_P_IP))
+ switch (skb->protocol) {
+ case __constant_htons(ETH_P_IP):
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ type_tucmd_mlhl |=
+ IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ break;
+
+ case __constant_htons(ETH_P_IPV6):
+ /* XXX what about other V6 headers?? */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ type_tucmd_mlhl |=
+ IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ break;

- if (skb->sk->sk_protocol == IPPROTO_TCP)
- type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ default:
+ if (unlikely(net_ratelimit())) {
+ DPRINTK(PROBE, WARNING,
+ "partial checksum but proto=%x!\n",
+ skb->protocol);
+ }
+ break;
+ }
}

context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
@@ -2778,6 +2795,14 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
hw->mac.type, hw->phy.type,
(part_num >> 8), (part_num & 0xff));

+ if (link_width <= IXGBE_PCI_LINK_WIDTH_4) {
+ dev_warn(&pdev->dev, "PCI-Express bandwidth available for "
+ "this card is not sufficient for optimal "
+ "performance.\n");
+ dev_warn(&pdev->dev, "For optimal performance a x8 "
+ "PCI-Express slot is required.\n");
+ }
+
/* reset the hardware with the new settings */
ixgbe_start_hw(hw);

diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index f18eca9..250eb19 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -559,8 +559,16 @@ static int mhz_setup(struct pcmcia_device *link)

/* Read the station address from the CIS. It is stored as the last
(fourth) string in the Version 1 Version/ID tuple. */
- if (link->prod_id[3]) {
- station_addr = link->prod_id[3];
+ tuple->DesiredTuple = CISTPL_VERS_1;
+ if (first_tuple(link, tuple, parse) != CS_SUCCESS) {
+ rc = -1;
+ goto free_cfg_mem;
+ }
+ /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
+ if (next_tuple(link, tuple, parse) != CS_SUCCESS)
+ first_tuple(link, tuple, parse);
+ if (parse->version_1.ns > 3) {
+ station_addr = parse->version_1.str + parse->version_1.ofs[3];
if (cvt_ascii_address(dev, station_addr) == 0) {
rc = 0;
goto free_cfg_mem;
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 35d15e8..6f33f84 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -36,6 +36,7 @@
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -297,18 +298,11 @@ static void tsi108_check_phy(struct net_device *dev)
u32 speed;
unsigned long flags;

- /* Do a dummy read, as for some reason the first read
- * after a link becomes up returns link down, even if
- * it's been a while since the link came up.
- */
-
spin_lock_irqsave(&phy_lock, flags);

if (!data->phy_ok)
goto out;

- tsi108_read_mii(data, MII_BMSR);
-
duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media);
data->init_media = 0;

@@ -345,22 +339,21 @@ static void tsi108_check_phy(struct net_device *dev)

TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg);
TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg);
+ }

- if (data->link_up == 0) {
- /* The manual says it can take 3-4 usecs for the speed change
- * to take effect.
- */
- udelay(5);
+ if (data->link_up == 0) {
+ /* The manual says it can take 3-4 usecs for the speed change
+ * to take effect.
+ */
+ udelay(5);

- spin_lock(&data->txlock);
- if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
- netif_wake_queue(dev);
+ spin_lock(&data->txlock);
+ if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
+ netif_wake_queue(dev);

- data->link_up = 1;
- spin_unlock(&data->txlock);
- }
+ data->link_up = 1;
+ spin_unlock(&data->txlock);
}
-
} else {
if (data->link_up == 1) {
netif_stop_queue(dev);
@@ -1274,12 +1267,11 @@ static void tsi108_init_phy(struct net_device *dev)
* PHY_STAT register before the link up status bit is set.
*/

- data->link_up = 1;
+ data->link_up = 0;

while (!((phyval = tsi108_read_mii(data, MII_BMSR)) &
BMSR_LSTATUS)) {
if (i++ > (MII_READ_DELAY / 10)) {
- data->link_up = 0;
break;
}
spin_unlock_irqrestore(&phy_lock, flags);
@@ -1287,6 +1279,7 @@ static void tsi108_init_phy(struct net_device *dev)
spin_lock_irqsave(&phy_lock, flags);
}

+ data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval);
data->phy_ok = 1;
data->init_media = 1;
@@ -1527,12 +1520,46 @@ static void tsi108_init_mac(struct net_device *dev)
TSI_WRITE(TSI108_EC_INTMASK, ~0);
}

+static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct tsi108_prv_data *data = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rc = mii_ethtool_gset(&data->mii_if, cmd);
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rc;
+}
+
+static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct tsi108_prv_data *data = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rc = mii_ethtool_sset(&data->mii_if, cmd);
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rc;
+}
+
static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct tsi108_prv_data *data = netdev_priv(dev);
+ if (!netif_running(dev))
+ return -EINVAL;
return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL);
}

+static const struct ethtool_ops tsi108_ethtool_ops = {
+ .get_link = ethtool_op_get_link,
+ .get_settings = tsi108_get_settings,
+ .set_settings = tsi108_set_settings,
+};
+
static int
tsi108_init_one(struct platform_device *pdev)
{
@@ -1584,7 +1611,6 @@ tsi108_init_one(struct platform_device *pdev)
data->mii_if.phy_id = einfo->phy;
data->mii_if.phy_id_mask = 0x1f;
data->mii_if.reg_num_mask = 0x1f;
- data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);

data->phy = einfo->phy;
data->phy_type = einfo->phy_type;
@@ -1598,6 +1624,7 @@ tsi108_init_one(struct platform_device *pdev)
dev->get_stats = tsi108_get_stats;
netif_napi_add(dev, &data->napi, tsi108_poll, 64);
dev->do_ioctl = tsi108_do_ioctl;
+ dev->ethtool_ops = &tsi108_ethtool_ops;

/* Apparently, the Linux networking code won't use scatter-gather
* if the hardware doesn't do checksums. However, it's faster
@@ -1629,6 +1656,7 @@ tsi108_init_one(struct platform_device *pdev)
goto register_fail;
}

+ platform_set_drvdata(pdev, dev);
printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n",
dev->name, print_mac(mac, dev->dev_addr));
#ifdef DEBUG

\
 
 \ /
  Last update: 2008-02-15 17:05    [W:0.218 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site