lkml.org 
[lkml]   [2008]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] gdth: bugfix for the at-exit problems
On Thu, Feb 14 2008 at 18:10 +0200, James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
> On Thu, 2008-02-14 at 13:58 +0200, Boaz Harrosh wrote:
>> This is a bugfix for the 2.6.24.x stable releases.
>>
>> gdth_exit would first remove all cards then stop the timer
>> and would not sync with the timer function. This caused a crash
>> in gdth_timer() when module was unloaded.
>> So del_timer_sync the timer before we delete the cards.
>>
>> also the reboot notifier function would crash. So unify
>> the exit and halt functions with a gdth_shutdown() that's
>> called by both.
>
> The patch looks fine now, thanks. Can we actually get a tester just to
> make sure there's nothing I missed.
>
> James
>
>

Yes, and the tester reported, a breakage. We are on it.
Apparently, you cannot do a full deallocation of resources
at reboot notifier, nor would you want to I guess.

But you can do the flush. The exit call is never called
on a reboot and the card access is valid to the end.

Please comment?

So I pretty much reverted that patch, but did leave some
cleanups.

Also we found the other problems reported with user-mode tools
and cat /proc/sys/gdth/0

so 2 patches on the way above reverted. Give us a few ours to test
every thing.

Thanks
Boaz



\
 
 \ /
  Last update: 2008-02-14 17:23    [W:0.062 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site