lkml.org 
[lkml]   [2008]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: REPOST: [PATCH] Add iSCSI iBFT support (v0.4.7)
On Mon, Feb 11, 2008 at 06:35:16PM -0500, Konrad Rzeszutek wrote:
> > > + if (hdr->id == id_nic) {
> > > + pci_dev = pci_get_bus_and_slot((nic->pci_bdf & 0xff00) >>
> > > 8, + (nic->pci_bdf & 0xff));
> > pci_get_bus_and_slot fails in the presence of PCI domains, which are
> > getting to be fairly common even in medium sized servers ... what
> > happens in that case?
>
> The specification did not take that in to account. The Bus/Dev/Func
> information is only present there - no domain information.

That's really broken then. Common i386 boxes these days have multiple
PCI domains, it's not all that uncommon at all.

And almost all big 64 bit boxes have them.

> Do you think I should implement a search functionality for this so that is
> searches through the domains for the bus/dev/func and picks the
> first found match (which might be the wrong match)?

I'm guessing that bad things would happen if you picked the wrong pci
device, right?

> Or wait to get the spec updated so that the iBFT will have this data?

I think the spec needs to be fixed. Or at least clarified (is it domain
0 only?)

thanks,

greg k-h


\
 
 \ /
  Last update: 2008-02-12 01:51    [W:0.110 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site