lkml.org 
[lkml]   [2008]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[M68KNOMMU]: platform setup for 523x ColdFire parts
Switch to platform style configuration for 523x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---


diff -Naurp linux-2.6.24/arch/m68knommu/platform/523x/config.c linux-2.6.24-uc0/arch/m68knommu/platform/523x/config.c
--- linux-2.6.24/arch/m68knommu/platform/523x/config.c 2008-01-25 08:58:37.000000000 +1000
+++ linux-2.6.24-uc0/arch/m68knommu/platform/523x/config.c 2007-11-30 11:03:11.000000000 +1000
@@ -16,11 +16,11 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <asm/dma.h>
+#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>

/***************************************************************************/

@@ -28,14 +28,58 @@ void coldfire_reset(void);

/***************************************************************************/

-/*
- * DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
- MCF_MBAR + MCFDMA_BASE0,
+static struct mcf_platform_uart m523x_uart_platform[] = {
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE1,
+ .irq = MCFINT_VECBASE + MCFINT_UART0,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE2,
+ .irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE3,
+ .irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
+ },
+ { },
};

-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+static struct platform_device m523x_uart = {
+ .name = "mcfuart",
+ .id = 0,
+ .dev.platform_data = m523x_uart_platform,
+};
+
+static struct platform_device *m523x_devices[] __initdata = {
+ &m523x_uart,
+};
+
+/***************************************************************************/
+
+#define INTC0 (MCF_MBAR + MCFICM_INTC0)
+
+static void __init m523x_uart_init_line(int line, int irq)
+{
+ u32 imr;
+
+ if ((line < 0) || (line > 2))
+ return;
+
+ writeb(0x30+line, (INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line));
+
+ imr = readl(INTC0 + MCFINTC_IMRL);
+ imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
+ writel(imr, INTC0 + MCFINTC_IMRL);
+}
+
+static void __init m523x_uarts_init(void)
+{
+ const int nrlines = ARRAY_SIZE(m523x_uart_platform);
+ int line;
+
+ for (line = 0; (line < nrlines); line++)
+ m523x_uart_init_line(line, m523x_uart_platform[line].irq);
+}

/***************************************************************************/

@@ -49,15 +93,26 @@ void mcf_disableall(void)

void mcf_autovector(unsigned int vec)
{
- /* Everything is auto-vectored on the 5272 */
+ /* Everything is auto-vectored on the 523x */
}

/***************************************************************************/

-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
{
mcf_disableall();
mach_reset = coldfire_reset;
+ m523x_uarts_init();
}

/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/

\
 
 \ /
  Last update: 2008-02-01 08:39    [W:0.026 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site