lkml.org 
[lkml]   [2008]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] virtio: make PCI devices take a virtio_pci module ref
From
Date
On Mon, 2008-12-08 at 08:46 -0600, Anthony Liguori wrote:
> Mark McLoughlin wrote:
> > On Sun, 2008-12-07 at 18:52 +1030, Rusty Russell wrote:
> >
> >> On Saturday 06 December 2008 01:37:06 Mark McLoughlin wrote:
> >>
> >>> Another example of a lack of an explicit dependency causing problems is
> >>> Fedora's mkinitrd having this hack:
> >>>
> >>> if echo $PWD | grep -q /virtio-pci/ ; then
> >>> findmodule virtio_pci
> >>> fi
> >>>
> >>> which basically says "if this is a virtio device, don't forget to
> >>> include virtio_pci in the initrd too!". Now, mkinitrd is full of hacks,
> >>> but this is a particularly unusual one.
> >>>
> >> Um, I don't know what this does, sorry.
> >>
> >> I have no idea how Fedora chooses what to put in an initrd; I can't think
> >> of a sensible way of deciding what goes in and what doesn't other than
> >> lists and heuristics.
> >>
> >
> > Fedora's mkinitrd creates an initrd suitable to boot the machine you run
> > mkinitrd on, rather than creating an initrd suitable to boot any
> > machine.
> >
> > So, it goes "ah, / is mounted from /dev/vda, we need to include
> > virtio_blk and it's dependencies". It does that in a generic way that
> > works well for most setups:
> >
> > 1) Find the device name (e.g. vda) below /sys/block
> >
> > 2) Follow the 'device' link to e.g. /sys/devices/virtio-pci/virtio1
> >
> > 3) Find the module need for this through either 'modalias' or the
> > 'driver/module' symlink
> >
> > 4) Use modprobe to list any dependencies of that module
> >
> > Clearly, virtio-pci won't be pulled in by any of this so we've added a
> > hack to say "oh, it's a virtio device, let's include virtio_pci just in
> > case".
> >
> > It's not even the case that mkinitrd needs to know how to include the
> > the module for the bus, because in our case that's virtio.ko ... we've
> > pretty effectively hidden the the bus *implementation* from userspace.
> >
> > I don't think this is worth wasting too much time fixing, that's why I'm
> > thinking we should just make virtio_pci built-in by default with
> > CONFIG_KVM_GUEST.
> >
>
> What if we have multiple virtio transports?

I don't think that's so much an an issue (just build in any transport
supported by KVM), but rather that you might build a non-pv_ops kernel
to run on QEMU which would benefit from using virtio drivers ...

> Is there a way that we can
> expose the relationship with virtio-blk and virtio-pci in sysfs? We
> have a struct device for the PCI device, it's just a matter of making
> the link visible.

It feels a bit like busy work to generalise this since only virtio_pci
can be built as a module, but here's a patch.

The mkinitrd hack turns into:

# Handle finding virtio bus implementations
if [ -L ./virtio_module ] ; then
findmodule $(basename $(readlink ./virtio_module))
else if echo $PWD | grep -q /virtio-pci/ ; then
findmodule virtio_pci
fi; fi

Cheers,
Mark.

[PATCH] virtio: add a 'virtio_module' sysfs symlink

Add a way for userspace to determine which virtio bus transport a
given device is associated with.

This will be used by Fedora mkinitrd to generically determine e.g.
that virtio_pci is needed to mount a given root filesystem.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
---
drivers/virtio/virtio.c | 21 ++++++++++++++++++++-
drivers/virtio/virtio_pci.c | 1 +
include/linux/virtio_config.h | 2 ++
3 files changed, 23 insertions(+), 1 deletions(-)

diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 018c070..640ede8 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -189,13 +189,32 @@ int register_virtio_device(struct virtio_device *dev)
* matching driver. */
err = device_register(&dev->dev);
if (err)
- add_status(dev, VIRTIO_CONFIG_S_FAILED);
+ goto out;
+
+ /* Create a virtio_module symlink */
+ if (dev->config->owner) {
+ struct module_kobject *mk = &dev->config->owner->mkobj;
+
+ err = sysfs_create_link(&dev->dev.kobj, &mk->kobj,
+ "virtio_module");
+ if (err)
+ goto unreg;
+ }
+
+ return 0;
+
+unreg:
+ device_unregister(&dev->dev);
+out:
+ add_status(dev, VIRTIO_CONFIG_S_FAILED);
return err;
}
EXPORT_SYMBOL_GPL(register_virtio_device);

void unregister_virtio_device(struct virtio_device *dev)
{
+ if (dev->config->owner)
+ sysfs_remove_link(&dev->dev.kobj, "virtio_module");
device_unregister(&dev->dev);
}
EXPORT_SYMBOL_GPL(unregister_virtio_device);
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 939e0b4..59e928d 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -328,6 +328,7 @@ static void vp_del_vq(struct virtqueue *vq)
}

static struct virtio_config_ops virtio_pci_config_ops = {
+ .owner = THIS_MODULE,
.get = vp_get,
.set = vp_set,
.get_status = vp_get_status,
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index bf8ec28..0a01cda 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -33,6 +33,7 @@

/**
* virtio_config_ops - operations for configuring a virtio device
+ * @owner: the module implementing these ops, usually THIS_MODULE
* @get: read the value of a configuration field
* vdev: the virtio_device
* offset: the offset of the configuration field
@@ -68,6 +69,7 @@
*/
struct virtio_config_ops
{
+ struct module *owner;
void (*get)(struct virtio_device *vdev, unsigned offset,
void *buf, unsigned len);
void (*set)(struct virtio_device *vdev, unsigned offset,
--
1.6.0.3


\
 
 \ /
  Last update: 2008-12-09 17:45    [W:0.089 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site