Messages in this thread | | | From | "Rafael J. Wysocki" <> | Subject | Re: 2.6.27 - swncq problem with nforce 570 and ST3320620AS? | Date | Sun, 7 Dec 2008 22:20:05 +0100 |
| |
On Tuesday, 2 of December 2008, Jan De Luyck wrote: > Hello, > > I switched not too long ago to 2.6.27-series, and since then I've been getting this now and then at bootup: > > This was with 2.6.27.4, upgraded today to 2.6.27.7.
Does it happen with the current mainline too?
Rafael
> Disk in question is: > > ATA device, with non-removable media > Model Number: ST3320620AS > Serial Number: 9QF1QMGA > Firmware Revision: 3.AAE > > whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0x6 sactive 0x6 > whocares kernel: ata4: SWNCQ:qc_active 0x6 defer_bits 0x0 last_issue_tag 0x2 > whocares kernel: dhfis 0x6 dmafis 0x2 sdbfis 0x0 > whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0 > whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve > whocares kernel: ata4: tag 0x1: 1 1 0 1 > whocares kernel: ata4: tag 0x2: 1 0 0 1 > whocares kernel: ata4.00: exception Emask 0x0 SAct 0x6 SErr 0x1800000 action 0x6 frozen > whocares kernel: ata4: SError: { LinkSeq TrStaTrns } > whocares kernel: ata4.00: cmd 60/3e:08:61:00:00/00:00:00:00:00/40 tag 1 ncq 31744 in > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4.00: cmd 60/02:10:bf:d6:42/00:00:25:00:00/40 tag 2 ncq 1024 in > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4: hard resetting link > whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > whocares kernel: ata4.00: configured for UDMA/133 > whocares kernel: ata4: EH complete > whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB) > whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off > whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > ... > whocares kernel: XFS mounting filesystem sdd1 > whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF > whocares kernel: ata4: SWNCQ:qc_active 0x1 defer_bits 0xE last_issue_tag 0x0 > whocares kernel: dhfis 0x1 dmafis 0x1 sdbfis 0x0 > whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0 > whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve > whocares kernel: ata4: tag 0x0: 1 1 0 1 > whocares kernel: ata4.00: exception Emask 0x0 SAct 0xf SErr 0x400000 action 0x6 frozen > whocares kernel: ata4: SError: { Handshk } > whocares kernel: ata4.00: cmd 61/00:00:9f:8d:a2/04:00:12:00:00/40 tag 0 ncq 524288 out > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4.00: cmd 61/00:08:9f:91:a2/04:00:12:00:00/40 tag 1 ncq 524288 out > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4.00: cmd 61/00:10:9f:95:a2/04:00:12:00:00/40 tag 2 ncq 524288 out > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4.00: cmd 61/00:18:9f:99:a2/04:00:12:00:00/40 tag 3 ncq 524288 out > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4: hard resetting link > whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > whocares kernel: ata4.00: configured for UDMA/133 > whocares kernel: ata4: EH complete > whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB) > whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off > whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF > whocares kernel: ata4: SWNCQ:qc_active 0x1 defer_bits 0xE last_issue_tag 0x0 > whocares kernel: dhfis 0x1 dmafis 0x1 sdbfis 0x0 > whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0 > whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve > whocares kernel: ata4: tag 0x0: 1 1 0 1 > whocares kernel: ata4.00: exception Emask 0x0 SAct 0xf SErr 0x400000 action 0x6 frozen > whocares kernel: ata4: SError: { Handshk } > whocares kernel: ata4.00: cmd 61/00:00:9f:99:a2/04:00:12:00:00/40 tag 0 ncq 524288 out > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4.00: cmd 61/00:08:9f:95:a2/04:00:12:00:00/40 tag 1 ncq 524288 out > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4.00: cmd 61/00:10:9f:91:a2/04:00:12:00:00/40 tag 2 ncq 524288 out > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4.00: cmd 61/00:18:9f:8d:a2/04:00:12:00:00/40 tag 3 ncq 524288 out > whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > whocares kernel: ata4.00: status: { DRDY } > whocares kernel: ata4: hard resetting link > whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > whocares kernel: ata4.00: configured for UDMA/133 > whocares kernel: ata4: EH complete > whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB) > whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off > whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > whocares kernel: Ending clean XFS mount for filesystem: sdd1 > ... > > Anyone any idea what might be causing this? > > I have several disks of the same type in my PC, with different firmwares though - this is the only > one exhibiting this problem.
| |