lkml.org 
[lkml]   [2008]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 02/27] drivers/net: fix sparse warnings: make do-while a compound statement
Date
From
While at it insert some extra curly braces and fix formatting.

Fix this sparse warnings:

drivers/net/atp.c:811:8: warning: do-while statement is not a compound statement
drivers/net/atp.c:813:8: warning: do-while statement is not a compound statement
drivers/net/atp.c:815:11: warning: do-while statement is not a compound statement
drivers/net/atp.c:817:11: warning: do-while statement is not a compound statement
drivers/net/plip.c:642:4: warning: do-while statement is not a compound statement
drivers/net/plip.c:647:4: warning: do-while statement is not a compound statement
drivers/net/plip.c:820:4: warning: do-while statement is not a compound statement
drivers/net/plip.c:825:4: warning: do-while statement is not a compound statement
drivers/net/starfire.c:886:3: warning: do-while statement is not a compound statement

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
---
drivers/net/atp.c | 19 ++++++++++---------
drivers/net/plip.c | 16 ++++++++--------
drivers/net/starfire.c | 4 ++--
3 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index 1d6b74c..ea493ce 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -802,21 +802,22 @@ static void net_rx(struct net_device *dev)

static void read_block(long ioaddr, int length, unsigned char *p, int data_mode)
{
-
if (data_mode <= 3) { /* Mode 0 or 1 */
outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL);
outb(length == 8 ? RdAddr | HNib | MAR : RdAddr | MAR,
ioaddr + PAR_DATA);
if (data_mode <= 1) { /* Mode 0 or 1 */
- do *p++ = read_byte_mode0(ioaddr); while (--length > 0);
- } else /* Mode 2 or 3 */
- do *p++ = read_byte_mode2(ioaddr); while (--length > 0);
- } else if (data_mode <= 5)
- do *p++ = read_byte_mode4(ioaddr); while (--length > 0);
- else
- do *p++ = read_byte_mode6(ioaddr); while (--length > 0);
+ do { *p++ = read_byte_mode0(ioaddr); } while (--length > 0);
+ } else { /* Mode 2 or 3 */
+ do { *p++ = read_byte_mode2(ioaddr); } while (--length > 0);
+ }
+ } else if (data_mode <= 5) {
+ do { *p++ = read_byte_mode4(ioaddr); } while (--length > 0);
+ } else {
+ do { *p++ = read_byte_mode6(ioaddr); } while (--length > 0);
+ }

- outb(EOC+HNib+MAR, ioaddr + PAR_DATA);
+ outb(EOC+HNib+MAR, ioaddr + PAR_DATA);
outb(Ctrl_SelData, ioaddr + PAR_CONTROL);
}

diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 5d904f7..ed8582e 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -638,14 +638,14 @@ plip_receive_packet(struct net_device *dev, struct net_local *nl,

case PLIP_PK_DATA:
lbuf = rcv->skb->data;
- do
+ do {
if (plip_receive(nibble_timeout, dev,
&rcv->nibble, &lbuf[rcv->byte]))
return TIMEOUT;
- while (++rcv->byte < rcv->length.h);
- do
+ } while (++rcv->byte < rcv->length.h);
+ do {
rcv->checksum += lbuf[--rcv->byte];
- while (rcv->byte);
+ } while (rcv->byte);
rcv->state = PLIP_PK_CHECKSUM;

case PLIP_PK_CHECKSUM:
@@ -816,14 +816,14 @@ plip_send_packet(struct net_device *dev, struct net_local *nl,
snd->checksum = 0;

case PLIP_PK_DATA:
- do
+ do {
if (plip_send(nibble_timeout, dev,
&snd->nibble, lbuf[snd->byte]))
return TIMEOUT;
- while (++snd->byte < snd->length.h);
- do
+ } while (++snd->byte < snd->length.h);
+ do {
snd->checksum += lbuf[--snd->byte];
- while (snd->byte);
+ } while (snd->byte);
snd->state = PLIP_PK_CHECKSUM;

case PLIP_PK_CHECKSUM:
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 01493a4..8bfc15b 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -882,9 +882,9 @@ static int mdio_read(struct net_device *dev, int phy_id, int location)
void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2);
int result, boguscnt=1000;
/* ??? Should we add a busy-wait here? */
- do
+ do {
result = readl(mdio_addr);
- while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0);
+ } while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0);
if (boguscnt == 0)
return 0;
if ((result & 0xffff) == 0xffff)


\
 
 \ /
  Last update: 2008-12-22 20:19    [from the cache]
©2003-2011 Jasper Spaans