lkml.org 
[lkml]   [2008]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG] linux-2.6.28-rc3 regression: IRQ smp_affinities not respected
Michael Chan a écrit :
> On Wed, 2008-11-26 at 09:14 -0800, Michael Chan wrote:
>> On Wed, 2008-11-26 at 01:01 -0800, Eric Dumazet wrote:
>>> Eric Dumazet a écrit :
>>>> Michael Chan a écrit :
>>>>> I believe this may be the patch that broke it:
>>>>>
>>>>> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ce6fce4295ba727b36fdc73040e444bd1aae64cd
>>>>>
>>>>>
>>>>> I don't remember all the details, but the Broadcom 5708 chip is
>>>>> affected because it does not support MSI per-vector masking.
>>>>>
>>>>> One way to get around is to disable MSI with bnx2 parameter
>>>>> disable_msi=1.
>>>>>
>>>> I tried this MSI disabling and yes, it now works.
>>>>
>>>> 16: 42726 128 105 106 89
>>>> 89 145 152 IO-APIC-fasteoi uhci_hcd:usb1, eth0, eth1
>>>>
>>> I believe the bnx2 driver doesnt work at all if !disable_msi (default setting)
>>>
>>> Doing a "echo 0 >/sys/devices/system/cpu/cpu1/online" just freeze network
>>>
>>> No messages logged
>>>
>>> If loaded with disable_msi=1, the cpu unplug works as expected.
>>>
>>> Thats a pretty serious issue.
>>>
>> Yes, that's the same issue and it is serious. If MSI is being delivered
>> to CPU 1 and you then take CPU 1 offline, the MSI will not be delivered
>> to another CPU.
>>
>> I think I can detect this problem in bnx2_timer() and try to recover.
>> I'll post a patch when I have something ready. Thanks.
>
> [PATCH] bnx2: Add workaround to handle missed MSI.
>
> The bnx2 chips do not support per MSI vector masking. On 5706/5708, new MSI
> address/data are stored only when the MSI enable bit is toggled. As a result,
> SMP affinity no longer works in the latest kernel. A more serious problem is
> that the driver will no longer receive interrupts when the MSI receiving CPU
> goes offline.
>
> The workaround in this patch only addresses the problem of CPU going offline.
> When that happens, the driver's timer function will detect that it is making
> no forward progress on pending interrupt events and will recover from it.
>
> Eric Dumazet reported the problem.
>
> We also found that if an interrupt is internally asserted while MSI and INTA
> are disabled, the chip will end up in the same state after MSI is re-enabled.
> The same workaround is needed for this problem.
>
> Signed-off-by: Michael Chan <mchan@broadcom.com>
> ---
> drivers/net/bnx2.c | 35 ++++++++++++++++++++++++++++++++---
> drivers/net/bnx2.h | 6 ++++++
> 2 files changed, 38 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
> index 182f241..0e2218d 100644
> --- a/drivers/net/bnx2.c
> +++ b/drivers/net/bnx2.c
> @@ -3147,6 +3147,28 @@ bnx2_has_work(struct bnx2_napi *bnapi)
> return 0;
> }
>
> +static void
> +bnx2_chk_missed_msi(struct bnx2 *bp)
> +{
> + struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
> + u32 msi_ctrl;
> +
> + if (bnx2_has_work(bnapi)) {
> + msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL);
> + if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE))
> + return;
> +
> + if (bnapi->last_status_idx == bp->idle_chk_status_idx) {
> + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl &
> + ~BNX2_PCICFG_MSI_CONTROL_ENABLE);
> + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl);
> + bnx2_msi(bp->irq_tbl[0].vector, bnapi);
> + }
> + }
> +
> + bp->idle_chk_status_idx = bnapi->last_status_idx;
> +}
> +
> static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
> {
> struct status_block *sblk = bnapi->status_blk.msi;
> @@ -3221,14 +3243,15 @@ static int bnx2_poll(struct napi_struct *napi, int budget)
>
> work_done = bnx2_poll_work(bp, bnapi, work_done, budget);
>
> - if (unlikely(work_done >= budget))
> - break;
> -
> /* bnapi->last_status_idx is used below to tell the hw how
> * much work has been processed, so we must read it before
> * checking for more work.
> */
> bnapi->last_status_idx = sblk->status_idx;
> +
> + if (unlikely(work_done >= budget))
> + break;
> +
> rmb();
> if (likely(!bnx2_has_work(bnapi))) {
> netif_rx_complete(bp->dev, napi);
> @@ -4581,6 +4604,8 @@ bnx2_init_chip(struct bnx2 *bp)
> for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
> bp->bnx2_napi[i].last_status_idx = 0;
>
> + bp->idle_chk_status_idx = 0xffff;
> +
> bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE;
>
> /* Set up how to generate a link change interrupt. */
> @@ -5729,6 +5754,10 @@ bnx2_timer(unsigned long data)
> if (atomic_read(&bp->intr_sem) != 0)
> goto bnx2_restart_timer;
>
> + if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) ==
> + BNX2_FLAG_USING_MSI)
> + bnx2_chk_missed_msi(bp);
> +
> bnx2_send_heart_beat(bp);
>
> bp->stats_blk->stat_FwRxDrop =
> diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
> index 0763108..2f43c45 100644
> --- a/drivers/net/bnx2.h
> +++ b/drivers/net/bnx2.h
> @@ -378,6 +378,9 @@ struct l2_fhdr {
> * pci_config_l definition
> * offset: 0000
> */
> +#define BNX2_PCICFG_MSI_CONTROL 0x00000058
> +#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16)
> +
> #define BNX2_PCICFG_MISC_CONFIG 0x00000068
> #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2)
> #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3)
> @@ -6882,6 +6885,9 @@ struct bnx2 {
>
> u8 num_tx_rings;
> u8 num_rx_rings;
> +
> + u32 idle_chk_status_idx;
> +
> };
>
> #define REG_RD(bp, offset) \

Thanks a lot Michael

I tested your patch on my machine.

I confirm CPU unplug/hotplug works now (If correcting a bug in oprofile first)
NIC doesnt freeze anymore

Eric

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-12-02 07:07    [W:0.089 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site