lkml.org 
[lkml]   [2008]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] e1000e: fix double release of mutex
Date
During a reset, releasing the swflag after it failed to be acquired would
cause a double unlock of the mutex. Instead, test whether acquisition of
the swflag was successful and if not, do not release the swflag. The reset
must still be done to bring the device to a quiescent state.

This resolves [BUG 12200] BUG: bad unlock balance detected! e1000e
http://bugzilla.kernel.org/show_bug.cgi?id=12200

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

drivers/net/e1000e/ich8lan.c | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 92f2ace..f2a5963 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1939,12 +1939,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ctrl |= E1000_CTRL_PHY_RST;
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
+ /* Whether or not the swflag was acquired, we need to reset the part */
hw_dbg(hw, "Issuing a global reset to ich8lan\n");
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);

- /* release the swflag because it is not reset by hardware reset */
- e1000_release_swflag_ich8lan(hw);
+ if (!ret_val) {
+ /* release the swflag because it is not reset by
+ * hardware reset
+ */
+ e1000_release_swflag_ich8lan(hw);
+ }

ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {


\
 
 \ /
  Last update: 2008-12-11 23:01    [W:0.038 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site