[lkml]   [2008]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [PATCH] PNPACPI: Enable Power Support
    On Mon, 08 Dec 2008, Witold Szczeponik wrote:
    > This patch sets the power of PnP ACPI devices to D0 when they
    > are activated and to D3 when they are disabled. The latter is

    This will likely fix my T43 to power down USB during STR. THANKS!!
    Now, I just need to check if the ACPI BIOS is smart enough to not do
    it when they are configured as wake devices [in the BIOS].

    Although I do wonder WTF we don't do that on our USB UHCI/EHCI kernel
    drivers, that ACPI needs to step in to fix it. If it is not a wake
    device, why are we leaving it powered up? It is bad enough we don't
    have any sort of proper USB power control, but to leave the entire USB
    subsystem powered up without reason?!

    Vista not only powers down the USB HCIs and ports on STR, it also
    powers down ports when you "safely remove the USB device", and seems
    to leave the port powered down until you insert a device (or remove
    the device already in there, whatever).

    "One disk to rule them all, One disk to find them. One disk to bring
    them all and in the darkness grind them. In the Land of Redmond
    where the shadows lie." -- The Silicon Valley Tarot
    Henrique Holschuh

     \ /
      Last update: 2008-12-10 10:55    [W:0.020 / U:45.572 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site