lkml.org 
[lkml]   [2008]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectProblem with SI3124-based controller and SI 4726-based PMP in RAID10 mode

I have a sata_sil24 problem involving a 4-port SI3124-based controller
connected to a 3-port eSATA enclosure. Each eSATA port is an SI
4726-based H/W PMP. The PMPs are connected to (13) 1 TB hard drives, as
indicated below.

PCI3124 Port 1
4726 (Configured in RAID10 mode)
4726 Port 1 => 1 TB drive
4726 Port 2 => 1 TB drive
4726 Port 3 => 1 TB drive
4726 Port 4 => 1 TB drive
4726 Port 5 => 1 TB drive
PCI3124 Port 2
4726 (Configured in RAID10 mode)
4726 Port 1 => 1 TB drive
4726 Port 2 => 1 TB drive
4726 Port 3 => 1 TB drive
4726 Port 4 => 1 TB drive
4726 Port 5 => 1 TB drive
PCI3124 Port 3
4726 (Configured in JBOD/Passthru mode)
4726 Port 1 => 1 TB drive
4726 Port 2 => 1 TB drive
4726 Port 3 => 1 TB drive
4726 Port 4 => no connection
4726 Port 5 => no connection
PCI3124 Port 4 =>no connection

I am running openSuse 11.0 with a 2.6.27.7-4.1 kernel

For the 4726 PMP configured in JBOD mode, all is well, and I can see all
3 disks.

However, for the 4726 PMPs configured in RAID10 mode, I can see NONE of
the disks.

As I understand it, the 4726 is a hardware-based PMP which can handle
RAID10 by itself and thereby offload the RAID processing. I would expect
the 3124 controller to see the drives hidden behind the 4726 as a single
unit, but this does not happen. Instead I get the errors listed at end,
and the RAID10 device is not 'seen' at all. (Key error of note is "both
IDENTIFYs aborted, assuming NODEV")

JBOD is fine for host-only based RAID functionality, but I want the
higher performance the 4726 offers for RAID10.
Is is not possible to off-load the RAID10 function to the 4726 under linux?

Any help, workarounds (beyond strict JBOD mode) are appreciated.

Thanks!

Dec 10 11:02:23 buildhost36 sudo: e-build : TTY=pts/1 ;
PWD=/home/e-build ; USER=root ; COMMAND=/sbin/modprobe sata_sil24
Dec 10 11:02:23 buildhost36 kernel: sata_sil24 0000:03:03.0: version 1.1
Dec 10 11:02:23 buildhost36 kernel: vendor=8086 device=0329
Dec 10 11:02:23 buildhost36 kernel: vendor=8086 device=3595
Dec 10 11:02:23 buildhost36 kernel: sata_sil24 0000:03:03.0: PCI INT A
-> GSI 72 (level, low) -> IRQ 64
Dec 10 11:02:23 buildhost36 kernel: sata_sil24 0000:03:03.0: Applying
completion IRQ loss on PCI-X errata fix
Dec 10 11:02:23 buildhost36 kernel: scsi8 : sata_sil24
Dec 10 11:02:23 buildhost36 kernel: scsi9 : sata_sil24
Dec 10 11:02:23 buildhost36 kernel: scsi10 : sata_sil24
Dec 10 11:02:23 buildhost36 kernel: scsi11 : sata_sil24
Dec 10 11:02:23 buildhost36 kernel: ata7: SATA max UDMA/100 host
m128@0xdefffc00 port 0xdeff0000 irq 64
Dec 10 11:02:23 buildhost36 kernel: ata8: SATA max UDMA/100 host
m128@0xdefffc00 port 0xdeff2000 irq 64
Dec 10 11:02:23 buildhost36 kernel: ata9: SATA max UDMA/100 host
m128@0xdefffc00 port 0xdeff4000 irq 64
Dec 10 11:02:23 buildhost36 kernel: ata10: SATA max UDMA/100 host
m128@0xdefffc00 port 0xdeff6000 irq 64
Dec 10 11:02:25 buildhost36 kernel: ata7: SATA link up 3.0 Gbps (SStatus
123 SControl 0)
Dec 10 11:02:25 buildhost36 kernel: ata7.15: Port Multiplier 1.1,
0x1095:0x4726 r31, 3 ports, feat 0x1/0x9
Dec 10 11:02:25 buildhost36 kernel: ata7.00: hard resetting link
Dec 10 11:02:25 buildhost36 kernel: ata7.00: SATA link down (SStatus 4
SControl 0)
Dec 10 11:02:25 buildhost36 kernel: ata7.01: hard resetting link
Dec 10 11:02:25 buildhost36 kernel: ata7.01: SATA link up 3.0 Gbps
(SStatus 123 SControl 0)
Dec 10 11:02:25 buildhost36 kernel: ata7.02: hard resetting link
Dec 10 11:02:26 buildhost36 kernel: ata7.02: SATA link up 1.5 Gbps
(SStatus 113 SControl 320)
Dec 10 11:02:26 buildhost36 kernel: ata7.01: unsupported device, disabling
Dec 10 11:02:26 buildhost36 kernel: ata7.01: disabled
Dec 10 11:02:26 buildhost36 kernel: ata7.02: both IDENTIFYs aborted,
assuming NODEV
Dec 10 11:02:26 buildhost36 kernel: ata7: EH complete
Dec 10 11:02:28 buildhost36 kernel: ata8: SATA link up 3.0 Gbps (SStatus
123 SControl 0)
Dec 10 11:02:28 buildhost36 kernel: ata8.15: Port Multiplier 1.1,
0x1095:0x4726 r31, 3 ports, feat 0x1/0x9
Dec 10 11:02:28 buildhost36 kernel: ata8.00: hard resetting link
Dec 10 11:02:28 buildhost36 kernel: ata8.00: SATA link down (SStatus 4
SControl 0)
Dec 10 11:02:28 buildhost36 kernel: ata8.01: hard resetting link
Dec 10 11:02:29 buildhost36 kernel: ata8.01: SATA link up 3.0 Gbps
(SStatus 123 SControl 0)
Dec 10 11:02:29 buildhost36 kernel: ata8.02: hard resetting link
Dec 10 11:02:29 buildhost36 kernel: ata8.02: SATA link up 1.5 Gbps
(SStatus 113 SControl 320)
Dec 10 11:02:29 buildhost36 kernel: ata8.01: unsupported device, disabling
Dec 10 11:02:29 buildhost36 kernel: ata8.01: disabled
Dec 10 11:02:29 buildhost36 kernel: ata8.02: both IDENTIFYs aborted,
assuming NODEV
Dec 10 11:02:29 buildhost36 kernel: ata8: EH complete
Dec 10 11:02:31 buildhost36 kernel: ata9: SATA link up 3.0 Gbps (SStatus
123 SControl 0)
Dec 10 11:02:31 buildhost36 kernel: ata9.15: Port Multiplier 1.1,
0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
Dec 10 11:02:31 buildhost36 kernel: ata9.00: hard resetting link
Dec 10 11:02:32 buildhost36 kernel: ata9.00: SATA link up 1.5 Gbps
(SStatus 113 SControl 320)
Dec 10 11:02:32 buildhost36 kernel: ata9.01: hard resetting link
Dec 10 11:02:32 buildhost36 kernel: ata9.01: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Dec 10 11:02:32 buildhost36 kernel: ata9.02: hard resetting link
Dec 10 11:02:32 buildhost36 kernel: ata9.02: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Dec 10 11:02:32 buildhost36 kernel: ata9.03: hard resetting link
Dec 10 11:02:33 buildhost36 kernel: ata9.03: SATA link down (SStatus 0
SControl 320)
Dec 10 11:02:33 buildhost36 kernel: ata9.04: hard resetting link
Dec 10 11:02:33 buildhost36 kernel: ata9.04: SATA link down (SStatus 0
SControl 320)
Dec 10 11:02:33 buildhost36 kernel: ata9.05: hard resetting link
Dec 10 11:02:33 buildhost36 kernel: ata9.05: SATA link up 3.0 Gbps
(SStatus 123 SControl 0)
Dec 10 11:02:33 buildhost36 kernel: ata9.06: hard resetting link
Dec 10 11:02:34 buildhost36 kernel: ata9.06: SATA link up 1.5 Gbps
(SStatus 113 SControl 320)
Dec 10 11:02:34 buildhost36 kernel: ata9.00: ATA-8: ST31000340AS, SD15,
max UDMA/133
Dec 10 11:02:34 buildhost36 kernel: ata9.00: 1953525168 sectors, multi
0: LBA48 NCQ (depth 31/32)
Dec 10 11:02:34 buildhost36 kernel: ata9.00: configured for UDMA/100
Dec 10 11:02:34 buildhost36 kernel: ata9.01: ATA-8: ST31000340AS, SD15,
max UDMA/133
Dec 10 11:02:34 buildhost36 kernel: ata9.01: 1953525168 sectors, multi
0: LBA48 NCQ (depth 31/32)
Dec 10 11:02:34 buildhost36 kernel: ata9.01: configured for UDMA/100
Dec 10 11:02:34 buildhost36 kernel: ata9.02: ATA-8: ST31000340AS, SD15,
max UDMA/133
Dec 10 11:02:34 buildhost36 kernel: ata9.02: 1953525168 sectors, multi
0: LBA48 NCQ (depth 31/32)
Dec 10 11:02:34 buildhost36 kernel: ata9.02: configured for UDMA/100
Dec 10 11:02:34 buildhost36 kernel: ata9.05: unsupported device, disabling
Dec 10 11:02:34 buildhost36 kernel: ata9.05: disabled
Dec 10 11:02:34 buildhost36 kernel: ata9: EH complete
Dec 10 11:02:36 buildhost36 kernel: ata10: SATA link down (SStatus 0
SControl 0)
Dec 10 11:02:36 buildhost36 kernel: scsi 10:0:0:0: Direct-Access ATA
ST31000340AS SD15 PQ: 0 ANSI: 5
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] 1953525168
512-byte hardware sectors: (1000GB/931GiB)
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] Write Protect is off
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] Mode Sense: 00 3a
00 00
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] 1953525168
512-byte hardware sectors: (1000GB/931GiB)
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] Write Protect is off
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] Mode Sense: 00 3a
00 00
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 11:02:36 buildhost36 kernel: sdb:
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: [sdb] Attached SCSI disk
Dec 10 11:02:36 buildhost36 kernel: sd 10:0:0:0: Attached scsi generic
sg2 type 0
Dec 10 11:02:36 buildhost36 kernel: scsi 10:1:0:0: Direct-Access ATA
ST31000340AS SD15 PQ: 0 ANSI: 5
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] 1953525168
512-byte hardware sectors: (1000GB/931GiB)
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] Write Protect is off
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] Mode Sense: 00 3a
00 00
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] 1953525168
512-byte hardware sectors: (1000GB/931GiB)
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] Write Protect is off
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] Mode Sense: 00 3a
00 00
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 11:02:36 buildhost36 kernel: sdc:
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: [sdc] Attached SCSI disk
Dec 10 11:02:36 buildhost36 kernel: sd 10:1:0:0: Attached scsi generic
sg3 type 0
Dec 10 11:02:36 buildhost36 kernel: scsi 10:2:0:0: Direct-Access ATA
ST31000340AS SD15 PQ: 0 ANSI: 5
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] 1953525168
512-byte hardware sectors: (1000GB/931GiB)
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] Write Protect is off
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] Mode Sense: 00 3a
00 00
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] 1953525168
512-byte hardware sectors: (1000GB/931GiB)
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] Write Protect is off
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] Mode Sense: 00 3a
00 00
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 11:02:36 buildhost36 kernel: sdd: sdd1
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: [sdd] Attached SCSI disk
Dec 10 11:02:36 buildhost36 kernel: sd 10:2:0:0: Attached scsi generic
sg4 type 0
Dec 10 11:02:55 buildhost36 sshd[6534]: Accepted
keyboard-interactive/pam for e-build from 9.65.98.119 port 34222 ssh2
Dec 10 11:03:57 buildhost36 sshd[6566]: Accepted
keyboard-interactive/pam for root from 9.65.98.119 port 44494 ssh2

Henri Daumas
Global TIM Competency - Integrated Operations
Configuration Management/Build






\
 
 \ /
  Last update: 2008-12-10 21:01    [W:0.037 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site