lkml.org 
[lkml]   [2008]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] usb: make printk messges more searchable
Make USB printk messages long and straightforward.  One of these
decorated USB error messages cost me some smart efforts to locate.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
drivers/usb/core/hub.c | 89 ++++++++++++++++++---------------------
1 file changed, 43 insertions(+), 46 deletions(-)

--- linux-2.6.orig/drivers/usb/core/hub.c
+++ linux-2.6/drivers/usb/core/hub.c
@@ -107,7 +107,8 @@ MODULE_PARM_DESC (blinkenlights, "true t
/* define initial 64-byte descriptor request timeout in milliseconds */
static int initial_descriptor_timeout = USB_CTRL_GET_TIMEOUT;
module_param(initial_descriptor_timeout, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(initial_descriptor_timeout, "initial 64-byte descriptor request timeout in milliseconds (default 5000 - 5.0 seconds)");
+MODULE_PARM_DESC(initial_descriptor_timeout,
+ "initial 64-byte descriptor request timeout in milliseconds (default 5000 - 5.0 seconds)");

/*
* As of 2.6.10 we introduce a new USB device initialization scheme which
@@ -131,8 +132,7 @@ MODULE_PARM_DESC(old_scheme_first,
static int use_both_schemes = 1;
module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(use_both_schemes,
- "try the other device initialization scheme if the "
- "first one fails");
+ "try the other device initialization scheme if the first one fails");

/* Mutual exclusion for EHCI CF initialization. This interferes with
* port reset on some companion controllers.
@@ -545,8 +545,7 @@ static unsigned hub_power_on(struct usb_
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2)
dev_dbg(hub->intfdev, "enabling power on all ports\n");
else
- dev_dbg(hub->intfdev, "trying to enable port power on "
- "non-switchable hub\n");
+ dev_dbg(hub->intfdev, "trying to enable port power on non-switchable hub\n");
for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);

@@ -1020,8 +1019,7 @@ static int hub_configure(struct usb_hub

if (remaining < hdev->maxchild * 100)
dev_warn(hub_dev,
- "insufficient power available "
- "to use all downstream ports\n");
+ "insufficient power available to use all downstream ports\n");
hub->mA_per_port = 100; /* 7.2.1.1 */
}
} else { /* Self-powered external hub */
@@ -1136,8 +1134,8 @@ static int hub_probe(struct usb_interfac
hdev = interface_to_usbdev(intf);

if (hdev->level == MAX_TOPO_LEVEL) {
- dev_err(&intf->dev, "Unsupported bus topology: "
- "hub nested too deep\n");
+ dev_err(&intf->dev,
+ "Unsupported bus topology: hub nested too deep\n");
return -E2BIG;
}

@@ -1476,8 +1474,8 @@ static void announce_device(struct usb_d
dev_info(&udev->dev, "New USB device found, idVendor=%04x, idProduct=%04x\n",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
- dev_info(&udev->dev, "New USB device strings: Mfr=%d, Product=%d, "
- "SerialNumber=%d\n",
+ dev_info(&udev->dev,
+ "New USB device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
udev->descriptor.iManufacturer,
udev->descriptor.iProduct,
udev->descriptor.iSerialNumber);
@@ -1542,7 +1540,7 @@ static int usb_configure_device_otg(stru
* customize to match your product.
*/
dev_info(&udev->dev,
- "can't set HNP mode; %d\n",
+ "can't set HNP mode: %d\n",
err);
bus->b_hnp_enable = 0;
}
@@ -1723,8 +1721,9 @@ int usb_authorize_device(struct usb_devi
}
result = usb_get_device_descriptor(usb_dev, sizeof(usb_dev->descriptor));
if (result < 0) {
- dev_err(&usb_dev->dev, "can't re-read device descriptor for "
- "authorization: %d\n", result);
+ dev_err(&usb_dev->dev,
+ "can't re-read device descriptor for authorization: %d\n",
+ result);
goto error_device_descriptor;
}
usb_dev->authorized = 1;
@@ -2020,8 +2019,8 @@ int usb_port_suspend(struct usb_device *
USB_CTRL_SET_TIMEOUT);
} else {
/* device has up to 10 msec to fully suspend */
- dev_dbg(&udev->dev, "usb %ssuspend\n",
- udev->auto_pm ? "auto-" : "");
+ dev_dbg(&udev->dev, "%s\n",
+ udev->auto_pm ? "usb auto-suspend" : "usb suspend");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
msleep(10);
}
@@ -2045,8 +2044,8 @@ static int finish_port_resume(struct usb
u16 devstatus;

/* caller owns the udev device lock */
- dev_dbg(&udev->dev, "finish %sresume\n",
- udev->reset_resume ? "reset-" : "");
+ dev_dbg(&udev->dev, "%s\n",
+ udev->reset_resume ? "finish reset-resume" : "finish resume");

/* usb ch9 identifies four variants of SUSPENDED, based on what
* state the device resumes to. Linux currently won't see the
@@ -2098,8 +2097,9 @@ static int finish_port_resume(struct usb
NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (status)
- dev_dbg(&udev->dev, "disable remote "
- "wakeup, status %d\n", status);
+ dev_dbg(&udev->dev,
+ "disable remote wakeup, status %d\n",
+ status);
}
status = 0;
}
@@ -2582,9 +2582,9 @@ hub_port_init (struct usb_hub *hub, stru
goto fail;
}
if (r) {
- dev_err(&udev->dev, "device descriptor "
- "read/%s, error %d\n",
- "64", r);
+ dev_err(&udev->dev,
+ "device descriptor read/64, error %d\n",
+ r);
retval = -EMSGSIZE;
continue;
}
@@ -2621,9 +2621,9 @@ hub_port_init (struct usb_hub *hub, stru

retval = usb_get_device_descriptor(udev, 8);
if (retval < 8) {
- dev_err(&udev->dev, "device descriptor "
- "read/%s, error %d\n",
- "8", retval);
+ dev_err(&udev->dev,
+ "device descriptor read/8, error %d\n",
+ retval);
if (retval >= 0)
retval = -EMSGSIZE;
} else {
@@ -2650,8 +2650,8 @@ hub_port_init (struct usb_hub *hub, stru

retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
if (retval < (signed)sizeof(udev->descriptor)) {
- dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
- "all", retval);
+ dev_err(&udev->dev, "device descriptor read/all, error %d\n",
+ retval);
if (retval >= 0)
retval = -ENOMSG;
goto fail;
@@ -2681,8 +2681,8 @@ check_highspeed (struct usb_hub *hub, st
status = usb_get_descriptor (udev, USB_DT_DEVICE_QUALIFIER, 0,
qual, sizeof *qual);
if (status == sizeof *qual) {
- dev_info(&udev->dev, "not running at top speed; "
- "connect to a high speed hub\n");
+ dev_info(&udev->dev,
+ "not running at top speed; connect to a high speed hub\n");
/* hub LEDs are probably harder to miss than syslog */
if (hub->has_indicators) {
hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
@@ -2719,9 +2719,9 @@ hub_power_remaining (struct usb_hub *hub
else
delta = 8;
if (delta > hub->mA_per_port)
- dev_warn(&udev->dev, "%dmA is over %umA budget "
- "for port %d!\n",
- delta, hub->mA_per_port, port1);
+ dev_warn(&udev->dev,
+ "%dmA is over %umA budget for port %d!\n",
+ delta, hub->mA_per_port, port1);
remaining -= delta;
}
if (remaining < 0) {
@@ -2812,8 +2812,9 @@ static void hub_port_connect_change(stru
status = hub_port_debounce(hub, port1);
if (status < 0) {
if (printk_ratelimit())
- dev_err(hub_dev, "connect-debounce failed, "
- "port %d disabled\n", port1);
+ dev_err(hub_dev,
+ "connect-debounce failed, port %d disabled\n",
+ port1);
portstatus &= ~USB_PORT_STAT_CONNECTION;
} else {
portstatus = status;
@@ -2883,8 +2884,7 @@ static void hub_port_connect_change(stru
le16_to_cpus(&devstat);
if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
dev_err(&udev->dev,
- "can't connect bus-powered hub "
- "to this port\n");
+ "can't connect bus-powered hub to this port\n");
if (hub->has_indicators) {
hub->indicator[port1-1] =
INDICATOR_AMBER_BLINK;
@@ -3067,9 +3067,8 @@ static void hub_events(void)
if (portchange & USB_PORT_STAT_C_ENABLE) {
if (!connect_change)
dev_dbg (hub_dev,
- "port %d enable change, "
- "status %08x\n",
- i, portstatus);
+ "port %d enable change, status %08x\n",
+ i, portstatus);
clear_port_feature(hdev, i,
USB_PORT_FEAT_C_ENABLE);

@@ -3083,10 +3082,8 @@ static void hub_events(void)
&& !connect_change
&& hdev->children[i-1]) {
dev_err (hub_dev,
- "port %i "
- "disabled by hub (EMI?), "
- "re-enabling...\n",
- i);
+ "port %i disabled by hub (EMI?), re-enabling...\n",
+ i);
connect_change = 1;
}
}
@@ -3420,8 +3417,8 @@ static int usb_reset_and_verify_device(s
ret = usb_set_interface(udev, desc->bInterfaceNumber,
desc->bAlternateSetting);
if (ret < 0) {
- dev_err(&udev->dev, "failed to restore interface %d "
- "altsetting %d (error=%d)\n",
+ dev_err(&udev->dev,
+ "failed to restore interface %d altsetting %d (error=%d)\n",
desc->bInterfaceNumber,
desc->bAlternateSetting,
ret);

\
 
 \ /
  Last update: 2008-12-10 08:33    [W:0.316 / U:0.720 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site