lkml.org 
[lkml]   [2008]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] pcmcia: ensure correct logging in do_io_probe [v2]
From
Date
I've added parens around the conditions. Maybe not strictly needed,
but better readable and consistent with similar usage in cs.c.

Cheers,
FJP

---
From: Frans Pop <elendil@planet.nl>

pcmcia: ensure correct logging in do_io_probe

During early probing of the parent PCI bridge I/O window no socket
has been allocated yet.
In that case print &s->cb_dev->dev instead of &s->dev as device.

Also properly close previous dev_printk if kzalloc fails.

Signed-off-by: Frans Pop <elendil@planet.nl>
CC: Dominik Brodowski <linux@dominikbrodowski.net>

diff --git a/drivers/pcmcia/rsrc_nonstatic.c
b/drivers/pcmcia/rsrc_nonstatic.c
index 17f4ecf..2a6a3d1 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -200,14 +200,17 @@ static void do_io_probe(struct pcmcia_socket *s,
unsigned int base,
int any;
u_char *b, hole, most;

- dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
- base, base+num-1);
+ dev_printk(KERN_INFO,
+ (s->state & SOCKET_PRESENT) ? &s->dev : &s->cb_dev->dev,
+ "cs: IO port probe %#x-%#x:", base, base+num-1);

/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
- dev_printk(KERN_ERR, &s->dev,
- "do_io_probe: unable to kmalloc 256 bytes");
+ printk("\n");
+ dev_printk(KERN_ERR,
+ (s->state & SOCKET_PRESENT) ? &s->dev : &s->cb_dev->dev,
+ "cs: do_io_probe: unable to kmalloc 256 bytes");
return;
}
for (i = base, most = 0; i < base+num; i += 8) {

\
 
 \ /
  Last update: 2008-11-07 15:25    [W:0.298 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site