lkml.org 
[lkml]   [2008]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 4/4] ALSA: cs5535audio: OLPC Analog Input and MIC Bias support

This adds support for the special cs5535audio features that OLPC XO-1s have.
They support switching between analog and DC recording, and the MIC requires
toggling V_REFOUT (which this patch renames to MIC Bias) to operate. There's
also an EAPD tweak which is necessary for B3 and newer machines.

All of this is enabled by CONFIG_OLPC (and CONFIG_SND_CS5535AUDIO, obviously).

Signed-off-by: Andres Salomon <dilinger@debian.org>
---
sound/pci/cs5535audio/Makefile | 1 +
sound/pci/cs5535audio/cs5535audio.c | 9 ++
sound/pci/cs5535audio/cs5535audio.h | 35 ++++++
sound/pci/cs5535audio/cs5535audio_olpc.c | 173 ++++++++++++++++++++++++++++++
sound/pci/cs5535audio/cs5535audio_pcm.c | 3 +
5 files changed, 221 insertions(+), 0 deletions(-)
create mode 100644 sound/pci/cs5535audio/cs5535audio_olpc.c

diff --git a/sound/pci/cs5535audio/Makefile b/sound/pci/cs5535audio/Makefile
index bb3d57e..ccc6422 100644
--- a/sound/pci/cs5535audio/Makefile
+++ b/sound/pci/cs5535audio/Makefile
@@ -4,6 +4,7 @@

snd-cs5535audio-y := cs5535audio.o cs5535audio_pcm.o
snd-cs5535audio-$(CONFIG_PM) += cs5535audio_pm.o
+snd-cs5535audio-$(CONFIG_OLPC) += cs5535audio_olpc.o

# Toplevel Module Dependency
obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index 6c886ed..826e6de 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -164,6 +164,9 @@ static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
ac97.private_data = cs5535au;
ac97.pci = cs5535au->pci;

+ /* set any OLPC-specific scaps */
+ olpc_prequirks(card, &ac97);
+
if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
snd_printk(KERN_ERR "mixer failed\n");
return err;
@@ -171,6 +174,12 @@ static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)

snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);

+ err = olpc_quirks(card, cs5535au->ac97);
+ if (err < 0) {
+ snd_printk(KERN_ERR "olpc quirks failed\n");
+ return err;
+ }
+
return 0;
}

diff --git a/sound/pci/cs5535audio/cs5535audio.h b/sound/pci/cs5535audio/cs5535audio.h
index 1aa1e2b..7777037 100644
--- a/sound/pci/cs5535audio/cs5535audio.h
+++ b/sound/pci/cs5535audio/cs5535audio.h
@@ -99,6 +99,41 @@ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
int snd_cs5535audio_resume(struct pci_dev *pci);
#endif

+#ifdef CONFIG_OLPC
+void __devinit olpc_prequirks(struct snd_card *card,
+ struct snd_ac97_template *ac97);
+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97);
+void olpc_analog_input(struct snd_ac97 *ac97, int on);
+void olpc_mic_bias(struct snd_ac97 *ac97, int on);
+
+static inline void olpc_capture_open(struct snd_ac97 *ac97)
+{
+ /* default to Analog Input off */
+ olpc_analog_input(ac97, 0);
+ /* enable MIC Bias for recording */
+ olpc_mic_bias(ac97, 1);
+}
+
+static inline void olpc_capture_close(struct snd_ac97 *ac97)
+{
+ /* disable Analog Input */
+ olpc_analog_input(ac97, 0);
+ /* disable the MIC Bias (so the recording LED turns off) */
+ olpc_mic_bias(ac97, 0);
+}
+#else
+static inline void olpc_prequirks(struct snd_card *card,
+ struct snd_ac97_template *ac97) { }
+static inline int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
+{
+ return 0;
+}
+static inline void olpc_analog_input(struct snd_ac97 *ac97, int on) { }
+static inline void olpc_mic_bias(struct snd_ac97 *ac97, int on) { }
+static inline void olpc_capture_open(struct snd_ac97 *ac97) { }
+static inline void olpc_capture_close(struct snd_ac97 *ac97) { }
+#endif
+
int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);

#endif /* __SOUND_CS5535AUDIO_H */
diff --git a/sound/pci/cs5535audio/cs5535audio_olpc.c b/sound/pci/cs5535audio/cs5535audio_olpc.c
new file mode 100644
index 0000000..164f6bd
--- /dev/null
+++ b/sound/pci/cs5535audio/cs5535audio_olpc.c
@@ -0,0 +1,173 @@
+/*
+ * OLPC XO-1 additional sound features
+ *
+ * Copyright © 2006 Jaya Kumar <jayakumar.lkml@gmail.com>
+ * Copyright © 2007-2008 Andres Salomon <dilinger@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/ac97_codec.h>
+
+#include <asm/olpc.h>
+#include "cs5535audio.h"
+
+/*
+ * OLPC has an additional feature on top of the regular AD1888 codec features.
+ * It has an Analog Input mode that is switched into (after disabling the
+ * High Pass Filter) via GPIO. It is supported on B2 and later models.
+ */
+void olpc_analog_input(struct snd_ac97 *ac97, int on)
+{
+ int err;
+
+ /* update the High Pass Filter (via AC97_AD_TEST2) */
+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+ 1 << AC97_AD_HPFD_SHIFT, on << AC97_AD_HPFD_SHIFT);
+ if (err < 0) {
+ snd_printk(KERN_ERR "setting High Pass Filter - %d\n", err);
+ return;
+ }
+
+ /* set Analog Input through GPIO */
+ if (on)
+ geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+ else
+ geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+}
+
+/*
+ * OLPC XO-1's V_REFOUT is a mic bias enable.
+ */
+void olpc_mic_bias(struct snd_ac97 *ac97, int on)
+{
+ int err;
+
+ on = on ? 0 : 1;
+ err = snd_ac97_update_bits(ac97, AC97_AD_MISC,
+ 1 << AC97_AD_VREFD_SHIFT, on << AC97_AD_VREFD_SHIFT);
+ if (err < 0)
+ snd_printk(KERN_ERR "setting MIC Bias - %d\n", err);
+}
+
+static int olpc_dc_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int olpc_dc_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
+{
+ v->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
+ GPIO_OUTPUT_VAL);
+ return 0;
+}
+
+static int olpc_dc_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl);
+
+ olpc_analog_input(cs5535au->ac97, v->value.integer.value[0]);
+ return 1;
+}
+
+static int olpc_mic_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int olpc_mic_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl);
+ struct snd_ac97 *ac97 = cs5535au->ac97;
+ int i;
+
+ i = (snd_ac97_read(ac97, AC97_AD_MISC) >> AC97_AD_VREFD_SHIFT) & 0x1;
+ v->value.integer.value[0] = i ? 0 : 1;
+ return 0;
+}
+
+static int olpc_mic_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl);
+
+ olpc_mic_bias(cs5535au->ac97, v->value.integer.value[0]);
+ return 1;
+}
+
+static struct snd_kcontrol_new olpc_cs5535audio_ctls[] __devinitdata = {
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "DC Mode Enable",
+ .info = olpc_dc_info,
+ .get = olpc_dc_get,
+ .put = olpc_dc_put,
+ .private_value = 0,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "MIC Bias Enable",
+ .info = olpc_mic_info,
+ .get = olpc_mic_get,
+ .put = olpc_mic_put,
+ .private_value = 0,
+},
+};
+
+void __devinit olpc_prequirks(struct snd_card *card,
+ struct snd_ac97_template *ac97)
+{
+ if (!machine_is_olpc())
+ return;
+
+ /* invert EAPD if on an OLPC B3 or higher */
+ if (olpc_board_at_least(olpc_board_pre(0xb3)))
+ ac97->scaps |= AC97_SCAP_INV_EAPD;
+}
+
+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
+{
+ struct snd_ctl_elem_id elem;
+ int i, err;
+
+ if (!machine_is_olpc())
+ return 0;
+
+ /* drop the original AD1888 HPF control */
+ memset(&elem, 0, sizeof(elem));
+ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ strncpy(elem.name, "High Pass Filter Enable", sizeof(elem.name));
+ snd_ctl_remove_id(card, &elem);
+
+ /* drop the original V_REFOUT control */
+ memset(&elem, 0, sizeof(elem));
+ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ strncpy(elem.name, "V_REFOUT Enable", sizeof(elem.name));
+ snd_ctl_remove_id(card, &elem);
+
+ /* add the OLPC-specific controls */
+ for (i = 0; i < ARRAY_SIZE(olpc_cs5535audio_ctls); i++) {
+ err = snd_ctl_add(card, snd_ctl_new1(&olpc_cs5535audio_ctls[i],
+ ac97->private_data));
+ if (err < 0)
+ return err;
+ }
+
+ /* turn off the mic by default */
+ olpc_mic_bias(ac97, 0);
+ return 0;
+}
diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c
index 6aa0c19..0f48a87 100644
--- a/sound/pci/cs5535audio/cs5535audio_pcm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pcm.c
@@ -363,11 +363,14 @@ static int snd_cs5535audio_capture_open(struct snd_pcm_substream *substream)
if ((err = snd_pcm_hw_constraint_integer(runtime,
SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
return err;
+ olpc_capture_open(cs5535au->ac97);
return 0;
}

static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
{
+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+ olpc_capture_close(cs5535au->ac97);
return 0;
}

--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-11-05 23:45    [W:0.033 / U:2.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site