lkml.org 
[lkml]   [2008]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: next-20081103 - possible circular locking dependency detected while bring up eth1
From
Date
On Wed, 2008-11-05 at 12:43 +0530, Kamalesh Babulal wrote:
> While booting with the next-20081103 kernel on x86 box, circular locking
> dependency is detected.
>
> Bringing up interface eth1: [ 31.988230]
> [ 31.988234] =======================================================
> [ 31.989072] [ INFO: possible circular locking dependency detected ]
> [ 31.989072] 2.6.28-rc3-next-20081103-autotest #1
> [ 31.989072] -------------------------------------------------------
> [ 31.989072] events/3/18 is trying to acquire lock:
> [ 32.074777] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 31.989072] (rtnl_mutex){--..}, at: [<c05e8ef5>] rtnl_lock+0xf/0x11
> [ 31.989072]
> [ 31.989072] but task is already holding lock:
> [ 31.989072] ((linkwatch_work).work){--..}, at: [<c04367bf>] run_workqueue+0x80/0x189
> [ 31.989072]
> [ 31.989072] which lock already depends on the new lock.
> [ 31.989072]
> [ 31.989072]
> [ 31.989072] the existing dependency chain (in reverse order) is:
> [ 31.989072]
> [ 31.989072] -> #4 ((linkwatch_work).work){--..}:
> [ 31.989072] [<c0445edb>] validate_chain+0x86e/0xb35
> [ 31.989072] [<c0446822>] __lock_acquire+0x680/0x70e
> [ 31.989072] [<c044690d>] lock_acquire+0x5d/0x7a
> [ 31.989072] [<c04367f8>] run_workqueue+0xb9/0x189
> [ 31.989072] [<c04371f3>] worker_thread+0xb4/0xbf
> [ 31.989072] [<c04396a6>] kthread+0x3b/0x61
> [ 31.989072] [<c040481b>] kernel_thread_helper+0x7/0x10
> [ 31.989072] [<ffffffff>] 0xffffffff
> [ 31.989072]
> [ 31.989072] -> #3 (events){--..}:
> [ 31.989072] [<c0445edb>] validate_chain+0x86e/0xb35
> [ 31.989072] [<c0446822>] __lock_acquire+0x680/0x70e
> [ 31.989072] [<c044690d>] lock_acquire+0x5d/0x7a
> [ 31.989072] [<c0436e21>] flush_work+0x45/0xb6
> [ 31.989072] [<c043729a>] schedule_on_each_cpu+0x9c/0xca
> [ 31.989072] [<c0466c97>] lru_add_drain_all+0xd/0xf
> [ 31.989072] [<c046f1b6>] __mlock_vma_pages_range+0x96/0x1e5
> [ 31.989072] [<c046f43a>] mlock_fixup+0x135/0x199
> [ 31.989072] [<c046f50b>] do_mlockall+0x6d/0x82
> [ 31.989072] [<c046f839>] sys_mlockall+0x7b/0x9e
> [ 31.989072] [<c040398d>] sysenter_do_call+0x12/0x31
> [ 31.989072] [<ffffffff>] 0xffffffff
> [ 31.989072]
> [ 31.989072] -> #2 (&mm->mmap_sem){----}:
> [ 31.989072] [<c0445edb>] validate_chain+0x86e/0xb35
> [ 31.989072] [<c0446822>] __lock_acquire+0x680/0x70e
> [ 31.989072] [<c044690d>] lock_acquire+0x5d/0x7a
> [ 31.989072] [<c046e570>] might_fault+0x53/0x73
> [ 31.989072] [<c0508bf5>] copy_to_user+0x28/0x3f
> [ 31.989072] [<c048cd11>] filldir+0x88/0xc8
> [ 31.989072] [<c04bee82>] sysfs_readdir+0x11d/0x156
> [ 31.989072] [<c048cdb9>] vfs_readdir+0x68/0x94
> [ 31.989072] [<c048d00b>] sys_getdents+0x5f/0xa0
> [ 31.989072] [<c0403a66>] syscall_call+0x7/0xb
> [ 31.989072] [<ffffffff>] 0xffffffff
> [ 31.989072]
> [ 31.989072] -> #1 (sysfs_mutex){--..}:
> [ 31.989072] [<c0445edb>] validate_chain+0x86e/0xb35
> [ 31.989072] [<c0446822>] __lock_acquire+0x680/0x70e
> [ 31.989072] [<c044690d>] lock_acquire+0x5d/0x7a
> [ 31.989072] [<c0651c04>] mutex_lock_nested+0xdf/0x251
> [ 31.989072] [<c04bf039>] sysfs_addrm_start+0x23/0x90
> [ 31.989072] [<c04bf4af>] create_dir+0x3a/0x72
> [ 31.989072] [<c04bf514>] sysfs_create_dir+0x2d/0x41
> [ 31.989072] [<c0503e05>] kobject_add_internal+0xe5/0x189
> [ 31.989072] [<c0503f54>] kobject_add_varg+0x35/0x41
> [ 31.989072] [<c05042f7>] kobject_add+0x49/0x4f
> [ 31.989072] [<c05777e1>] device_add+0x76/0x4c8
> [ 31.989072] [<c05eb70e>] netdev_register_kobject+0x64/0x69
> [ 31.989072] [<c05e1581>] register_netdevice+0x1fe/0x274
> [ 31.989072] [<c05e1629>] register_netdev+0x32/0x3f
> [ 31.989072] [<c07fa965>] loopback_net_init+0x2e/0x5d
> [ 31.989072] [<c05de93b>] register_pernet_operations+0x13/0x15
> [ 31.989072] [<c05de9a4>] register_pernet_device+0x1f/0x4c
> [ 31.989072] [<c07fa935>] loopback_init+0xd/0xf
> [ 31.989072] [<c0401130>] _stext+0x48/0x10d
> [ 31.989072] [<c07db530>] kernel_init+0xf1/0x142
> [ 31.989072] [<c040481b>] kernel_thread_helper+0x7/0x10
> [ 31.989072] [<ffffffff>] 0xffffffff
> [ 31.989072]
> [ 31.989072] -> #0 (rtnl_mutex){--..}:
> [ 31.989072] [<c0445c10>] validate_chain+0x5a3/0xb35
> [ 31.989072] [<c0446822>] __lock_acquire+0x680/0x70e
> [ 31.989072] [<c044690d>] lock_acquire+0x5d/0x7a
> [ 31.989072] [<c0651c04>] mutex_lock_nested+0xdf/0x251
> [ 31.989072] [<c05e8ef5>] rtnl_lock+0xf/0x11
> [ 31.989072] [<c05ea07a>] linkwatch_event+0x8/0x27
> [ 31.989072] [<c04367fd>] run_workqueue+0xbe/0x189
> [ 31.989072] [<c04371f3>] worker_thread+0xb4/0xbf
> [ 31.989072] [<c04396a6>] kthread+0x3b/0x61
> [ 31.989072] [<c040481b>] kernel_thread_helper+0x7/0x10
> [ 31.989072] [<ffffffff>] 0xffffffff
> [ 31.989072]
> [ 31.989072] other info that might help us debug this:
> [ 31.989072]
> [ 31.989072] 2 locks held by events/3/18:
> [ 31.989072] #0: (events){--..}, at: [<c04367bf>] run_workqueue+0x80/0x189
> [ 31.989072] #1: ((linkwatch_work).work){--..}, at: [<c04367bf>] run_workqueue+0x80/0x189
> [ 31.989072]
> [ 31.989072] stack backtrace:
> [ 31.989072] Pid: 18, comm: events/3 Not tainted 2.6.28-rc3-next-20081103-autotest #1
> [ 31.989072] Call Trace:
> [ 31.989072] [<c0445662>] print_circular_bug_tail+0xa4/0xaf
> [ 31.989072] [<c0445c10>] validate_chain+0x5a3/0xb35
> [ 31.989072] [<c0446822>] __lock_acquire+0x680/0x70e
> [ 31.989072] [<c04367bf>] ? run_workqueue+0x80/0x189
> [ 31.989072] [<c044690d>] lock_acquire+0x5d/0x7a
> [ 31.989072] [<c05e8ef5>] ? rtnl_lock+0xf/0x11
> [ 31.989072] [<c0651c04>] mutex_lock_nested+0xdf/0x251
> [ 31.989072] [<c05e8ef5>] ? rtnl_lock+0xf/0x11
> [ 31.989072] [<c05e8ef5>] ? rtnl_lock+0xf/0x11
> [ 31.989072] [<c05e8ef5>] rtnl_lock+0xf/0x11
> [ 31.989072] [<c05ea07a>] linkwatch_event+0x8/0x27
> [ 31.989072] [<c04367fd>] run_workqueue+0xbe/0x189
> [ 31.989072] [<c04367bf>] ? run_workqueue+0x80/0x189
> [ 31.989072] [<c05ea072>] ? linkwatch_event+0x0/0x27
> [ 31.989072] [<c043713f>] ? worker_thread+0x0/0xbf
> [ 31.989072] [<c04371f3>] worker_thread+0xb4/0xbf
> [ 31.989072] [<c0439765>] ? autoremove_wake_function+0x0/0x33
> [ 31.989072] [<c04396a6>] kthread+0x3b/0x61
> [ 33.690691] tg3: eth1: Link is up at 100 Mbps, full duplex.
> [ 33.690696] tg3: eth1: Flow control is off for TX and off for RX.
> [ 31.989072] [<c043966b>] ? kthread+0x0/0x61
> [ 31.989072] [<c040481b>] kernel_thread_helper+0x7/0x10
> [ 33.762336] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> [ OK ]

I think we have to go with Kosaki-san's vm workqueue...


\
 
 \ /
  Last update: 2008-11-05 08:51    [W:0.172 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site