lkml.org 
[lkml]   [2008]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] Use BIOS reboot on Toshiba Portege 4000
Avi Kivity <avi@redhat.com> writes:

> Eric W. Biederman wrote:
>> I think we are confusing two issues here.
>>
>> - Ordinary machine_restart which happens to call emergency_restart.
>> And is proceeded by machine_shutdown.
>>
>> - And emergency_restart itself.
>>
>> To some extent I would be a lot happier if Alt-sysrq-r did what
>> was necessary to get into a context where it can call machine_restart
>> or even better kernel_restart().
>> emergency_restart() is a nice idea but is broken by design.
>>
>>
>
> Isn't emergency_restart() equivalent to kexec()? Both start from indeterminite
> conditions.

Good point. That is a reasonable direction to evolve it on x86.
Similar to and sharing some of the same code as the kexec on panic path.

We may need to separate out emergency_restart from the normal clean
restart to make that happen. It would be pointless and silly to be
sending NMI at other cpus for example if we have cleanly shut them
down already.

>> That said. If we can turn off vmx on that one processor.
>> That should be enough for the cpu to triple fault and let
>> the BIOS do what it needs to do on that cpu i.e. outb(magic, 0x92)
>> and toggle a motherboard level reset?
>>
>>
>
> If triple fault is wired to INIT (as it is at least on some systems; for example
> one of mine) then the cpu will reset, but why will the bios proceed to issue a
> motherboard reset? Won't it happily POST it's way to boot (leaving the other
> cpus dead)?

I'm not certain. But when I was writing BIOS's it was much easier to
just toggle the reset line than to try and cope with the weird state
the machine was in. I'm pretty certain why we don't see more problems
with reboot when we leave the machine in a weird state. It is certainly
legal for a BIOS to just run the POST code though.


>> If I read the earlier comments correctly the deep issue is
>> that going through ACPI to reset systems is less reliable than
>> doing it the classic way.
>>
>
> It depends on the system; both are unreliable. But if we use the same trick as
> with kdump (NMI SIPI + vmxoff) the choice will be orthogonal to whether vmx is
> in use or not.


Yes.

Eric


\
 
 \ /
  Last update: 2008-11-04 12:27    [W:0.081 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site