Messages in this thread | | | Date | Tue, 25 Nov 2008 01:09:02 +0100 (CET) | From | Sven-Haegar Koch <> | Subject | Re: Extreme slowness with xfs [WAS: Re: Slowness with new pc] |
| |
On Tue, 25 Nov 2008, Stian Jordet wrote:
> ma., 24.11.2008 kl. 04.50 -0500, skrev Justin Piszcz: > > While there still may be something else wrong, the first problem I see is > > your sunit and swidth are set to 0. > > > > Please read, a good article on what they are and how to set them: > > http://www.socalsysadmin.com/ > > Oh, this was new to me. But the setting didn't change anything. I can > copy one large file between the xfs and ext3 disk (both ways), and I get > speeds between 160 and 200 MB/s. But unpacking the kernel source takes > between 5 and 10 minutes on the xfs disk, and a mere 15 seconds on the > ext3... (and it also used to take between 5 and 10 minutes when I had > xfs on the raid0, so it doesn't seem to be hardware related...)
I had the same problem when I tried it on my laptop (T60) - using it on the unencrypted root filesystem (with /usr/src) took ages, using it on the LUKS encrypted /home was blasing fast - on the same disk.
This test was some time ago with something like 2.6.20 or 2.6.24 - I gave up and reformatted / with ext3 as I needed the machine.
I think barriers were the problem, they seem to cost performance like hell, especially for operations with many small files. My laptop used barriers for xfs on the direct partition, but not on crypto drivermapper mounts.
So perhaps try mounting with nobarrier and see if the speed problem goes away - but know that you sacrifice some crash-resilience when doing so.
c'ya sven
--
The Internet treats censorship as a routing problem, and routes around it. (John Gilmore on http://www.cygnus.com/~gnu/)
| |