lkml.org 
[lkml]   [2008]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [2.6.28-rc5] RCU detected CPU 0 stall (t=4294893165/750 jiffies)
> > > > I'm afraid there's no script for that: it happens during boot.
> > > This is a HZ=250 machine, correct? If so, please try the following
> > > patch (already in -tip), which helps suppress boot-time false positives.
> > That's correct, 250Hz.
> > > -#define RCU_SECONDS_TILL_STALL_CHECK ( 3 * HZ) /* for rcp->jiffies_stall */
> > > +#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rcp->jiffies_stall */
> > Isn't it better to let the define depend on the value of CONFIG_HZ?
> > E.g.
> The stalls occur when CPUs spin in the kernel with preemption (or irqs
> or whatever) disabled. So while I suppose that there is some
> possibility that such a spin might be a function of HZ, I have never
> seen this happen.
> The reason I asked for your HZ value was to make sure that the stall
> detection was 3 seconds (750 jiffies). If you had been running a
> 75HZ system (admittedly unlikely) you would have seen a 10-second stall,
> and the patch would not help. In that case, the right thing to do would
> have been to work out why the system was spinning for 10 seconds during
> boot -- tough to get a 5-second boot when the system spins for 10
> seconds coming up, right? ;-)

That patch fixes the rcu error.

odr:/# grep -i rcu t
[ 0.000000] RCU-based detection of stalled CPUs is enabled.



Folkert van Heusden

--
MultiTail na wan makriki wrokosani fu tan luku den logfile nanga san
den commando spiti puru. Piki puru spesrutu sani, wroko nanga difrenti
kroru, tya kon makandra, nanga wan lo moro.
http://www.vanheusden.com/multitail/
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com


\
 
 \ /
  Last update: 2008-11-21 18:41    [W:2.996 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site