lkml.org 
[lkml]   [2008]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] x86: fix wakeup_cpu with numaq/es7000 v2

* Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> wrote:

> Yinghai Lu wrote:
> > Ingo Molnar wrote:
> >> hm, one of my testboxes is rather unhappy about your patch:
> >
> >
> > please check
> >
> > if you agree, will update update_genapic to autodetect other functions or etc.
> >
> > YH
> >
> > ---
> >
> > [PATCH] x86: fix wakeup_cpu with numaq/es7000 v2 - fix
> >
> > Impact: fix wakeup_secondary_cpu with hotplug
> >
> > We can not put that in x86_quirks, because that is __initdata.
> > So try to move that to genapic, and add update_genapic in x86_quirks.
> >
> > later we even could use that stub to
> > 1. autodetect CONFIG_ES7000_CLUSTERED_APIC
> > 2. more correct inquire_remote_apic with apic_verbosity setting.
>
> Hi,
>
> I encountered boot failure on x86_32 box.
> I think setting wakeup_cpu is missing.
>
> --------
> From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
> Subject: [PATCH] x86: genapic: fix missing wakeup_cpu setup
>
> Impact: fix boot failure
>
> There is no way to setup wakeup_cpu when boot parameter apic= is not passed.
>
> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
> ---
> arch/x86/mach-generic/probe.c | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)

thanks - i've applied the wider fix from Yinghai - see it below.

i'm wondering why my tests didnt trigger this boot crash. What makes
your system or .config special to trigger it?

Ingo

-------------->
From 87f7606591aea6a8a38ea4c8911b5eeeee2740b8 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 19 Nov 2008 20:50:53 -0800
Subject: [PATCH] x86: fix wakeup_cpu with numaq/es7000 v2 - call ->update_genapic()

Impact: fix boot crash on 32-bit

Hiroshi Shimamoto reported a boot failure on 32-bit x86.

The setting of x86_quirks.wakeup_cpu is missing (when
not passing in an explicit apic= boot parameter).

Reported-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/mach-generic/probe.c | 12 +++++++++++-
1 files changed, 11 insertions(+), 1 deletions(-)

diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index 90b134f..c346d9d 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -76,12 +76,15 @@ void __init generic_bigsmp_probe(void)
* - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
*/

- if (!cmdline_apic && genapic == &apic_default)
+ if (!cmdline_apic && genapic == &apic_default) {
if (apic_bigsmp.probe()) {
genapic = &apic_bigsmp;
+ if (x86_quirks->update_genapic)
+ x86_quirks->update_genapic();
printk(KERN_INFO "Overriding APIC driver with %s\n",
genapic->name);
}
+ }
#endif
}

@@ -98,6 +101,9 @@ void __init generic_apic_probe(void)
/* Not visible without early console */
if (!apic_probe[i])
panic("Didn't find an APIC driver");
+
+ if (x86_quirks->update_genapic)
+ x86_quirks->update_genapic();
}
printk(KERN_INFO "Using APIC driver %s\n", genapic->name);
}
@@ -112,6 +118,8 @@ int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
if (apic_probe[i]->mps_oem_check(mpc, oem, productid)) {
if (!cmdline_apic) {
genapic = apic_probe[i];
+ if (x86_quirks->update_genapic)
+ x86_quirks->update_genapic();
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
genapic->name);
}
@@ -128,6 +136,8 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
if (!cmdline_apic) {
genapic = apic_probe[i];
+ if (x86_quirks->update_genapic)
+ x86_quirks->update_genapic();
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
genapic->name);
}

\
 
 \ /
  Last update: 2008-11-20 10:49    [W:0.093 / U:0.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site