lkml.org 
[lkml]   [2008]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [patch 2.6.28-rc3-git] twl4030-core: allow reading entire register banks
* Samuel Ortiz <sameo@openedhand.com> [081107 16:30]:
> On Fri, Nov 07, 2008 at 02:00:03PM -0800, David Brownell wrote:
> > From: David Brownell <dbrownell@users.sourceforge.net>
> >
> > Minor change to the TWL4030 utility interface: support reads
> > of all 256 bytes in each register bank (vs just 255). This
> > can help when debugging, but is otherwise a NOP.
> Applied to my for-next branch.
> Thanks David.

Pushing also to linux-omap while waiting for this patch to fall down
from the mainline kernel.

Tony


> Cheers,
> Samuel.
>
>
> > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> > ---
> > drivers/mfd/twl4030-core.c | 4 ++--
> > include/linux/i2c/twl4030.h | 4 ++--
> > 2 files changed, 4 insertions(+), 4 deletions(-)
> >
> > --- a/drivers/mfd/twl4030-core.c
> > +++ b/drivers/mfd/twl4030-core.c
> > @@ -233,7 +233,7 @@ extern void twl4030_power_init(struct tw
> > *
> > * Returns the result of operation - 0 is success
> > */
> > -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
> > +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
> > {
> > int ret;
> > int sid;
> > @@ -282,7 +282,7 @@ EXPORT_SYMBOL(twl4030_i2c_write);
> > *
> > * Returns result of operation - num_bytes is success else failure.
> > */
> > -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
> > +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
> > {
> > int ret;
> > u8 val;
> > --- a/include/linux/i2c/twl4030.h
> > +++ b/include/linux/i2c/twl4030.h
> > @@ -78,8 +78,8 @@ int twl4030_i2c_read_u8(u8 mod_no, u8 *v
> > * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1
> > * for the value, and populate your data starting at offset 1.
> > */
> > -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
> > -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
> > +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
> > +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
> >
> > /*----------------------------------------------------------------------*/
> >
>
> --
> Intel Open Source Technology Centre
> http://oss.intel.com/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2008-11-13 22:57    [W:0.071 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site