lkml.org 
[lkml]   [2008]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 42/42] ext4: Rename ext4dev to ext4
Date
The ext4 filesystem is getting stable enough that it's time to drop
the "dev" prefix. Also remove the requirement for the TEST_FILESYS
flag.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
fs/Kconfig | 74 ++++++++++++++++++++++++++--------------------------
fs/Makefile | 2 +-
fs/ext4/Makefile | 10 +++---
fs/ext4/acl.h | 6 ++--
fs/ext4/ext4_i.h | 4 +-
fs/ext4/file.c | 2 +-
fs/ext4/inode.c | 2 +-
fs/ext4/namei.c | 6 ++--
fs/ext4/super.c | 36 +++++++++----------------
fs/ext4/symlink.c | 4 +-
fs/ext4/xattr.c | 8 +++---
fs/ext4/xattr.h | 8 +++---
12 files changed, 76 insertions(+), 86 deletions(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index abccb5d..6323e4f 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -136,37 +136,37 @@ config EXT3_FS_SECURITY
If you are not using a security module that requires using
extended attributes for file security labels, say N.

-config EXT4DEV_FS
- tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+config EXT4_FS
+ tristate "The Extended 4 (ext4) filesystem"
select JBD2
select CRC16
help
- Ext4dev is a predecessor filesystem of the next generation
- extended fs ext4, based on ext3 filesystem code. It will be
- renamed ext4 fs later, once ext4dev is mature and stabilized.
+ This is the next generation of the ext3 filesystem.

Unlike the change from ext2 filesystem to ext3 filesystem,
- the on-disk format of ext4dev is not the same as ext3 any more:
- it is based on extent maps and it supports 48-bit physical block
- numbers. These combined on-disk format changes will allow
- ext4dev/ext4 to handle more than 16 TB filesystem volumes --
- a hard limit that ext3 cannot overcome without changing the
- on-disk format.
-
- Other than extent maps and 48-bit block numbers, ext4dev also is
- likely to have other new features such as persistent preallocation,
- high resolution time stamps, and larger file support etc. These
- features will be added to ext4dev gradually.
+ the on-disk format of ext4 is not forwards compatible with
+ ext3; it is based on extent maps and it supports 48-bit
+ physical block numbers. The ext4 filesystem also supports delayed
+ allocation, persistent preallocation, high resolution time stamps,
+ and a number of other features to improve performance and speed
+ up fsck time. For more information, please see the web pages at
+ http://ext4.wiki.kernel.org.
+
+ The ext4 filesystem will support mounting an ext3
+ filesystem; while there will be some performance gains from
+ the delayed allocation and inode table readahead, the best
+ performance gains will require enabling ext4 features in the
+ filesystem, or formating a new filesystem as an ext4
+ filesystem initially.

To compile this file system support as a module, choose M here. The
module will be called ext4dev.

If unsure, say N.

-config EXT4DEV_FS_XATTR
- bool "Ext4dev extended attributes"
- depends on EXT4DEV_FS
+config EXT4_FS_XATTR
+ bool "Ext4 extended attributes"
+ depends on EXT4_FS
default y
help
Extended attributes are name:value pairs associated with inodes by
@@ -175,11 +175,11 @@ config EXT4DEV_FS_XATTR

If unsure, say N.

- You need this for POSIX ACL support on ext4dev/ext4.
+ You need this for POSIX ACL support on ext4.

-config EXT4DEV_FS_POSIX_ACL
- bool "Ext4dev POSIX Access Control Lists"
- depends on EXT4DEV_FS_XATTR
+config EXT4_FS_POSIX_ACL
+ bool "Ext4 POSIX Access Control Lists"
+ depends on EXT4_FS_XATTR
select FS_POSIX_ACL
help
POSIX Access Control Lists (ACLs) support permissions for users and
@@ -190,14 +190,14 @@ config EXT4DEV_FS_POSIX_ACL

If you don't know what Access Control Lists are, say N

-config EXT4DEV_FS_SECURITY
- bool "Ext4dev Security Labels"
- depends on EXT4DEV_FS_XATTR
+config EXT4_FS_SECURITY
+ bool "Ext4 Security Labels"
+ depends on EXT4_FS_XATTR
help
Security labels support alternative access control models
implemented by security modules like SELinux. This option
enables an extended attribute handler for file security
- labels in the ext4dev/ext4 filesystem.
+ labels in the ext4 filesystem.

If you are not using a security module that requires using
extended attributes for file security labels, say N.
@@ -240,22 +240,22 @@ config JBD2
help
This is a generic journaling layer for block devices that support
both 32-bit and 64-bit block numbers. It is currently used by
- the ext4dev/ext4 filesystem, but it could also be used to add
+ the ext4 filesystem, but it could also be used to add
journal support to other file systems or block devices such
as RAID or LVM.

- If you are using ext4dev/ext4, you need to say Y here. If you are not
- using ext4dev/ext4 then you will probably want to say N.
+ If you are using ext4, you need to say Y here. If you are not
+ using ext4 then you will probably want to say N.

To compile this device as a module, choose M here. The module will be
- called jbd2. If you are compiling ext4dev/ext4 into the kernel,
+ called jbd2. If you are compiling ext4 into the kernel,
you cannot compile this code as a module.

config JBD2_DEBUG
- bool "JBD2 (ext4dev/ext4) debugging support"
+ bool "JBD2 (ext4) debugging support"
depends on JBD2 && DEBUG_FS
help
- If you are using the ext4dev/ext4 journaled file system (or
+ If you are using the ext4 journaled file system (or
potentially any other filesystem/device using JBD2), this option
allows you to enable debugging output while the system is running,
in order to help track down any problems you are having.
@@ -270,9 +270,9 @@ config JBD2_DEBUG
config FS_MBCACHE
# Meta block cache for Extended Attributes (ext2/ext3/ext4)
tristate
- depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR
- default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y
- default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m
+ depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
+ default y if EXT2_FS=y || EXT3_FS=y || EXT4_FS=y
+ default m if EXT2_FS=m || EXT3_FS=m || EXT4_FS=m

config REISERFS_FS
tristate "Reiserfs support"
diff --git a/fs/Makefile b/fs/Makefile
index a1482a5..de404b0 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -69,7 +69,7 @@ obj-$(CONFIG_DLM) += dlm/
# Do not add any filesystems before this line
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3
-obj-$(CONFIG_EXT4DEV_FS) += ext4/ # Before ext2 so root fs can be ext4dev
+obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4dev
obj-$(CONFIG_JBD) += jbd/
obj-$(CONFIG_JBD2) += jbd2/
obj-$(CONFIG_EXT2_FS) += ext2/
diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
index ac6fa8c..a8ff003 100644
--- a/fs/ext4/Makefile
+++ b/fs/ext4/Makefile
@@ -2,12 +2,12 @@
# Makefile for the linux ext4-filesystem routines.
#

-obj-$(CONFIG_EXT4DEV_FS) += ext4dev.o
+obj-$(CONFIG_EXT4_FS) += ext4.o

-ext4dev-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
+ext4-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \
ext4_jbd2.o migrate.o mballoc.o

-ext4dev-$(CONFIG_EXT4DEV_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o
-ext4dev-$(CONFIG_EXT4DEV_FS_POSIX_ACL) += acl.o
-ext4dev-$(CONFIG_EXT4DEV_FS_SECURITY) += xattr_security.o
+ext4-$(CONFIG_EXT4_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o
+ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o
+ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o
diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h
index 4c9948f..cb45257 100644
--- a/fs/ext4/acl.h
+++ b/fs/ext4/acl.h
@@ -51,7 +51,7 @@ static inline int ext4_acl_count(size_t size)
}
}

-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL

/* Value for inode->u.ext4_i.i_acl and inode->u.ext4_i.i_default_acl
if the ACL has not been cached */
@@ -62,7 +62,7 @@ extern int ext4_permission(struct inode *, int);
extern int ext4_acl_chmod(struct inode *);
extern int ext4_init_acl(handle_t *, struct inode *, struct inode *);

-#else /* CONFIG_EXT4DEV_FS_POSIX_ACL */
+#else /* CONFIG_EXT4_FS_POSIX_ACL */
#include <linux/sched.h>
#define ext4_permission NULL

@@ -77,5 +77,5 @@ ext4_init_acl(handle_t *handle, struct inode *inode, struct inode *dir)
{
return 0;
}
-#endif /* CONFIG_EXT4DEV_FS_POSIX_ACL */
+#endif /* CONFIG_EXT4_FS_POSIX_ACL */

diff --git a/fs/ext4/ext4_i.h b/fs/ext4/ext4_i.h
index 2875eec..5c124c0 100644
--- a/fs/ext4/ext4_i.h
+++ b/fs/ext4/ext4_i.h
@@ -66,7 +66,7 @@ struct ext4_inode_info {
__u32 i_state; /* Dynamic state flags for ext4 */

ext4_lblk_t i_dir_start_lookup;
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
/*
* Extended attributes can be read independently of the main file
* data. Taking i_mutex even when reading would cause contention
@@ -76,7 +76,7 @@ struct ext4_inode_info {
*/
struct rw_semaphore xattr_sem;
#endif
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
struct posix_acl *i_acl;
struct posix_acl *i_default_acl;
#endif
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 6d5be15..6bd11fb 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -165,7 +165,7 @@ const struct inode_operations ext4_file_inode_operations = {
.truncate = ext4_truncate,
.setattr = ext4_setattr,
.getattr = ext4_getattr,
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index a474786..9b4ec9d 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4041,7 +4041,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
return inode;

ei = EXT4_I(inode);
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
ei->i_acl = EXT4_ACL_NOT_CACHED;
ei->i_default_acl = EXT4_ACL_NOT_CACHED;
#endif
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 5295a92..92db9e9 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1773,7 +1773,7 @@ retry:
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
init_special_inode(inode, inode->i_mode, rdev);
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
inode->i_op = &ext4_special_inode_operations;
#endif
err = ext4_add_nondir(handle, dentry, inode);
@@ -2456,7 +2456,7 @@ const struct inode_operations ext4_dir_inode_operations = {
.mknod = ext4_mknod,
.rename = ext4_rename,
.setattr = ext4_setattr,
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
@@ -2467,7 +2467,7 @@ const struct inode_operations ext4_dir_inode_operations = {

const struct inode_operations ext4_special_inode_operations = {
.setattr = ext4_setattr,
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 7d86560..67ebefb 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -569,7 +569,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS);
if (!ei)
return NULL;
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
ei->i_acl = EXT4_ACL_NOT_CACHED;
ei->i_default_acl = EXT4_ACL_NOT_CACHED;
#endif
@@ -605,7 +605,7 @@ static void init_once(void *foo)
struct ext4_inode_info *ei = (struct ext4_inode_info *) foo;

INIT_LIST_HEAD(&ei->i_orphan);
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
init_rwsem(&ei->xattr_sem);
#endif
init_rwsem(&ei->i_data_sem);
@@ -631,7 +631,7 @@ static void destroy_inodecache(void)

static void ext4_clear_inode(struct inode *inode)
{
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
if (EXT4_I(inode)->i_acl &&
EXT4_I(inode)->i_acl != EXT4_ACL_NOT_CACHED) {
posix_acl_release(EXT4_I(inode)->i_acl);
@@ -720,7 +720,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
seq_puts(seq, ",debug");
if (test_opt(sb, OLDALLOC))
seq_puts(seq, ",oldalloc");
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
if (test_opt(sb, XATTR_USER) &&
!(def_mount_opts & EXT4_DEFM_XATTR_USER))
seq_puts(seq, ",user_xattr");
@@ -729,7 +729,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
seq_puts(seq, ",nouser_xattr");
}
#endif
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
if (test_opt(sb, POSIX_ACL) && !(def_mount_opts & EXT4_DEFM_ACL))
seq_puts(seq, ",acl");
if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT4_DEFM_ACL))
@@ -1078,7 +1078,7 @@ static int parse_options(char *options, struct super_block *sb,
case Opt_orlov:
clear_opt(sbi->s_mount_opt, OLDALLOC);
break;
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
case Opt_user_xattr:
set_opt(sbi->s_mount_opt, XATTR_USER);
break;
@@ -1092,7 +1092,7 @@ static int parse_options(char *options, struct super_block *sb,
"not supported\n");
break;
#endif
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
case Opt_acl:
set_opt(sbi->s_mount_opt, POSIX_ACL);
break;
@@ -1987,11 +1987,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
set_opt(sbi->s_mount_opt, GRPID);
if (def_mount_opts & EXT4_DEFM_UID16)
set_opt(sbi->s_mount_opt, NO_UID32);
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
if (def_mount_opts & EXT4_DEFM_XATTR_USER)
set_opt(sbi->s_mount_opt, XATTR_USER);
#endif
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
if (def_mount_opts & EXT4_DEFM_ACL)
set_opt(sbi->s_mount_opt, POSIX_ACL);
#endif
@@ -2050,16 +2050,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
"running e2fsck is recommended\n");

/*
- * Since ext4 is still considered development code, we require
- * that the TEST_FILESYS flag in s->flags be set.
- */
- if (!(le32_to_cpu(es->s_flags) & EXT2_FLAGS_TEST_FILESYS)) {
- printk(KERN_WARNING "EXT4-fs: %s: not marked "
- "OK to use with test code.\n", sb->s_id);
- goto failed_mount;
- }
-
- /*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
* so there is a chance incompat flags are set on a rev 0 filesystem.
@@ -3580,9 +3570,9 @@ const struct file_operations ext4_ui_proc_fops = {
};
#endif

-static struct file_system_type ext4dev_fs_type = {
+static struct file_system_type ext4_fs_type = {
.owner = THIS_MODULE,
- .name = "ext4dev",
+ .name = "ext4",
.get_sb = ext4_get_sb,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
@@ -3603,7 +3593,7 @@ static int __init init_ext4_fs(void)
err = init_inodecache();
if (err)
goto out1;
- err = register_filesystem(&ext4dev_fs_type);
+ err = register_filesystem(&ext4_fs_type);
if (err)
goto out;
return 0;
@@ -3618,7 +3608,7 @@ out2:

static void __exit exit_ext4_fs(void)
{
- unregister_filesystem(&ext4dev_fs_type);
+ unregister_filesystem(&ext4_fs_type);
destroy_inodecache();
exit_ext4_xattr();
exit_ext4_mballoc();
diff --git a/fs/ext4/symlink.c b/fs/ext4/symlink.c
index 0013d52..00740cb 100644
--- a/fs/ext4/symlink.c
+++ b/fs/ext4/symlink.c
@@ -34,7 +34,7 @@ const struct inode_operations ext4_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
@@ -45,7 +45,7 @@ const struct inode_operations ext4_symlink_inode_operations = {
const struct inode_operations ext4_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ext4_follow_link,
-#ifdef CONFIG_EXT4DEV_FS_XATTR
+#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 362b0ed..80626d5 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -99,12 +99,12 @@ static struct mb_cache *ext4_xattr_cache;

static struct xattr_handler *ext4_xattr_handler_map[] = {
[EXT4_XATTR_INDEX_USER] = &ext4_xattr_user_handler,
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
[EXT4_XATTR_INDEX_POSIX_ACL_ACCESS] = &ext4_xattr_acl_access_handler,
[EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT] = &ext4_xattr_acl_default_handler,
#endif
[EXT4_XATTR_INDEX_TRUSTED] = &ext4_xattr_trusted_handler,
-#ifdef CONFIG_EXT4DEV_FS_SECURITY
+#ifdef CONFIG_EXT4_FS_SECURITY
[EXT4_XATTR_INDEX_SECURITY] = &ext4_xattr_security_handler,
#endif
};
@@ -112,11 +112,11 @@ static struct xattr_handler *ext4_xattr_handler_map[] = {
struct xattr_handler *ext4_xattr_handlers[] = {
&ext4_xattr_user_handler,
&ext4_xattr_trusted_handler,
-#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
+#ifdef CONFIG_EXT4_FS_POSIX_ACL
&ext4_xattr_acl_access_handler,
&ext4_xattr_acl_default_handler,
#endif
-#ifdef CONFIG_EXT4DEV_FS_SECURITY
+#ifdef CONFIG_EXT4_FS_SECURITY
&ext4_xattr_security_handler,
#endif
NULL
diff --git a/fs/ext4/xattr.h b/fs/ext4/xattr.h
index 814ea58..8ede88b 100644
--- a/fs/ext4/xattr.h
+++ b/fs/ext4/xattr.h
@@ -63,7 +63,7 @@ struct ext4_xattr_entry {
EXT4_I(inode)->i_extra_isize))
#define IFIRST(hdr) ((struct ext4_xattr_entry *)((hdr)+1))

-# ifdef CONFIG_EXT4DEV_FS_XATTR
+# ifdef CONFIG_EXT4_FS_XATTR

extern struct xattr_handler ext4_xattr_user_handler;
extern struct xattr_handler ext4_xattr_trusted_handler;
@@ -88,7 +88,7 @@ extern void exit_ext4_xattr(void);

extern struct xattr_handler *ext4_xattr_handlers[];

-# else /* CONFIG_EXT4DEV_FS_XATTR */
+# else /* CONFIG_EXT4_FS_XATTR */

static inline int
ext4_xattr_get(struct inode *inode, int name_index, const char *name,
@@ -141,9 +141,9 @@ ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize,

#define ext4_xattr_handlers NULL

-# endif /* CONFIG_EXT4DEV_FS_XATTR */
+# endif /* CONFIG_EXT4_FS_XATTR */

-#ifdef CONFIG_EXT4DEV_FS_SECURITY
+#ifdef CONFIG_EXT4_FS_SECURITY
extern int ext4_init_security(handle_t *handle, struct inode *inode,
struct inode *dir);
#else
--
1.5.6.1.205.ge2c7.dirty


\
 
 \ /
  Last update: 2008-10-09 06:21    [W:0.138 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site