lkml.org 
[lkml]   [2008]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] 8139too: move wmb before TX DMA start
From: Andreas Oberritter <obi@linuxtv.org>

The write barrier should be used before starting a DMA transfer. This fixes
a problem, where almost all packets received on another machine had garbled
content. Tested with an RTL8100C on a MIPS machine.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 53bd903..44344af 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -1716,13 +1716,13 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
}

spin_lock_irqsave(&tp->lock, flags);
+ wmb();
RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));

dev->trans_start = jiffies;

tp->cur_tx++;
- wmb();

if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
netif_stop_queue (dev);

\
 
 \ /
  Last update: 2008-10-08 09:57    [W:0.050 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site