lkml.org 
[lkml]   [2008]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
Tejun Heo wrote:
> Linda Walsh wrote:
>
>> Controller is a Promise TX4/300
>> Yeap. After the drive goes offline, does unplugging and replugging
>> the power cable to the harddrive makes it come back?
>>
----
No. It hangs the computer. about 2-3 seconds after plugging the
drives back in. Did it twice to verify it wasn't a fluke. Verified
drives removed from /dev, then
plugged them back in -- was able to do about 1-2 ls commands on /dev, then
keyboard goes dead.

First time I tried unplugging the power cables and replugging --
that hung...
2nd time tried unplugging a sata cable and replugging -- that hung too.

Hopefully you won't need any more tests of this exact nature...? :-)





\
 
 \ /
  Last update: 2008-10-08 00:31    [W:0.072 / U:5.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site