lkml.org 
[lkml]   [2008]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.28-rc2 hates my e1000e
On Thu, 30 Oct 2008 18:45:38 -0600
Robert Hancock <hancockr@shaw.ca> wrote:

> What's in /proc/iomem? Full dmesg output from boot would also be
> useful.

/proc/iomem looks like this with 2.6.28-rc2:

00000000-0009fbff : System RAM
000f0000-000fffff : reserved
00100000-be4ff7ff : System RAM
00200000-004a6e45 : Kernel code
004a6e46-00649b77 : Kernel data
006c4000-007585ff : Kernel bss
be4ff800-be553bff : ACPI Non-volatile Storage
be553c00-be555bff : ACPI Tables
be555c00-beffffff : reserved
c0000000-cfffffff : 0000:00:02.0
d0000000-d3ffffff : PCI Bus 0000:02
d0000000-d3ffffff : 0000:02:00.0
d0000000-d07fffff : ivtv encoder
d2000000-d200ffff : ivtv registers
d4000000-d4000fff : Intel Flush Page
e0000000-fe7fffff : reserved
fe800000-fe8fffff : PCI Bus 0000:01
fe800000-fe8fffff : reserved
fe900000-fe9d9aff : reserved
fe9d9b00-fe9d9bff : 0000:00:1f.3
fe9d9b00-fe9d9bff : reserved
fe9d9c00-fe9d9fff : 0000:00:1a.7
fe9d9c00-fe9d9fff : reserved
fe9da000-fe9dafff : 0000:00:03.3
fe9da000-fe9dafff : reserved
fe9db000-fe9dbfff : 0000:00:19.0
fe9db000-fe9dbfff : reserved
fe9dc000-fe9dffff : 0000:00:1b.0
fe9dc000-fe9dffff : reserved
fe9e0000-fe9fffff : 0000:00:19.0
fe9e0000-fe9fffff : reserved
fea00000-fea7ffff : 0000:00:02.0
fea00000-fea7ffff : reserved
fea80000-feafffff : 0000:00:02.1
fea80000-feafffff : reserved
feb00000-febfffff : 0000:00:02.0
feb00000-febfffff : reserved
fec00000-fed003ff : reserved
fec00000-fec00fff : IOAPIC 0
fed00000-fed003ff : HPET 0
fed20000-fed9ffff : reserved
fedad000-fedad00f : 0000:00:03.0
fee00000-feefffff : reserved
fee00000-fee00fff : Local APIC
ff980800-ff980bff : 0000:00:1d.7
ff980800-ff980bff : ehci_hcd
ffb00000-ffffffff : reserved

Remember that I/O memory is alleged to be at:

> Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at fe9db000 (32-bit, non-prefetchable) [size=4K]

These regions are marked "reserved" in this map.

The 2.6.27 view of I/O memory is rather different:

00000000-0009fbff : System RAM
000f0000-000fffff : reserved
00100000-be4ff7ff : System RAM
00200000-004b4d12 : Kernel code
004b4d13-0073000f : Kernel data
011b6000-0127e58f : Kernel bss
be4ff800-be553bff : ACPI Non-volatile Storage
be553c00-be555bff : ACPI Tables
be555c00-beffffff : reserved
c0000000-cfffffff : 0000:00:02.0
d0000000-d3ffffff : PCI Bus 0000:02
d0000000-d3ffffff : 0000:02:00.0
d0000000-d07fffff : ivtv encoder
d2000000-d200ffff : ivtv registers
d4000000-d40fffff : 0000:00:02.0
d4100000-d417ffff : 0000:00:02.0
d4180000-d41fffff : 0000:00:02.1
d4200000-d421ffff : 0000:00:19.0
d4200000-d421ffff : e1000e
d4220000-d4223fff : 0000:00:1b.0
d4220000-d4223fff : ICH HD audio
d4224000-d4224fff : 0000:00:03.3
d4225000-d4225fff : 0000:00:19.0
d4225000-d4225fff : e1000e
d4226000-d42263ff : 0000:00:1a.7
d4226000-d42263ff : ehci_hcd
d4226400-d42264ff : 0000:00:1f.3
d4227000-d4227fff : Intel Flush Page
e0000000-fed003ff : reserved
fec00000-fec00fff : IOAPIC 0
fed00000-fed003ff : HPET 0
fed20000-fed9ffff : reserved
fedad000-fedad00f : 0000:00:03.0
fee00000-feefffff : reserved
fee00000-fee00fff : Local APIC
ff980800-ff980bff : 0000:00:1d.7
ff980800-ff980bff : ehci_hcd
ffb00000-ffffffff : reserved

The 2.6.28-rc2 dmesg output follows.

> GSI 23 (level, low) -> IRQ 23
[ 5.480562] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.480565] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.480688] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 5.484666] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.484719] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.484734] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
[ 5.496687] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.496900] usb usb1: configuration #1 chosen from 1 choice
[ 5.497008] hub 1-0:1.0: USB hub found
[ 5.497062] hub 1-0:1.0: 6 ports detected
[ 5.497327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.497382] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.497455] usb usb1: Product: EHCI Host Controller
[ 5.497505] usb usb1: Manufacturer: Linux 2.6.28-rc2 ehci_hcd
[ 5.497557] usb usb1: SerialNumber: 0000:00:1d.7
[ 5.497647] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.497726] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.497786] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.497789] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.497884] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 5.497986] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 5.498146] usb usb2: configuration #1 chosen from 1 choice
[ 5.498250] hub 2-0:1.0: USB hub found
[ 5.498303] hub 2-0:1.0: 2 ports detected
[ 5.498520] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.498576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.498648] usb usb2: Product: UHCI Host Controller
[ 5.498698] usb usb2: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[ 5.498751] usb usb2: SerialNumber: 0000:00:1a.0
[ 5.498818] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.498878] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.498881] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.498976] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 5.499079] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 5.499255] usb usb3: configuration #1 chosen from 1 choice
[ 5.499358] hub 3-0:1.0: USB hub found
[ 5.499416] hub 3-0:1.0: 2 ports detected
[ 5.499634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.499690] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.499762] usb usb3: Product: UHCI Host Controller
[ 5.499813] usb usb3: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[ 5.499865] usb usb3: SerialNumber: 0000:00:1a.1
[ 5.499931] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.499990] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.499993] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.500098] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 5.500193] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 5.500359] usb usb4: configuration #1 chosen from 1 choice
[ 5.500463] hub 4-0:1.0: USB hub found
[ 5.500515] hub 4-0:1.0: 2 ports detected
[ 5.500736] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.500792] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.500865] usb usb4: Product: UHCI Host Controller
[ 5.503087] usb usb4: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[ 5.503139] usb usb4: SerialNumber: 0000:00:1d.0
[ 5.503205] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.503265] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.503268] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.503369] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 5.503463] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 5.503627] usb usb5: configuration #1 chosen from 1 choice
[ 5.503737] hub 5-0:1.0: USB hub found
[ 5.503789] hub 5-0:1.0: 2 ports detected
[ 5.504020] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.504076] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.504149] usb usb5: Product: UHCI Host Controller
[ 5.504199] usb usb5: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[ 5.504251] usb usb5: SerialNumber: 0000:00:1d.1
[ 5.504317] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.504376] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.504379] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.504485] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 5.504580] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 5.504751] usb usb6: configuration #1 chosen from 1 choice
[ 5.504858] hub 6-0:1.0: USB hub found
[ 5.504910] hub 6-0:1.0: 2 ports detected
[ 5.505145] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.505201] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.505274] usb usb6: Product: UHCI Host Controller
[ 5.505324] usb usb6: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[ 5.505376] usb usb6: SerialNumber: 0000:00:1d.2
[ 5.505526] usbcore: registered new interface driver usblp
[ 5.505580] Initializing USB Mass Storage driver...
[ 5.505690] usbcore: registered new interface driver usb-storage
[ 5.505745] USB Mass Storage support registered.
[ 5.505951] PNP: No PS/2 controller found. Probing ports directly.
[ 5.508550] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.508603] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.508780] mice: PS/2 mouse device common for all mice
[ 5.509019] coretemp coretemp.0: Using relative temperature scale!
[ 5.509172] coretemp coretemp.1: Using relative temperature scale!
[ 5.509284] EDAC MC: Ver: 2.1.0 Oct 30 2008
[ 5.509919] TCP bic registered
[ 5.509967] NET: Registered protocol family 17
[ 5.510236] registered taskstats version 1
[ 5.634462] kjournald starting. Commit interval 5 seconds
[ 5.634555] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.634623] VFS: Mounted root (ext3 filesystem) readonly.
[ 5.634686] Freeing unused kernel memory: 340k freed
[ 5.803374] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 5.927226] usb 1-3: configuration #1 chosen from 1 choice
[ 5.927526] hub 1-3:1.0: USB hub found
[ 5.927678] hub 1-3:1.0: 4 ports detected
[ 5.928869] usb 1-3: New USB device found, idVendor=050d, idProduct=0234
[ 5.928925] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.140038] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 6.314237] usb 2-2: configuration #1 chosen from 1 choice
[ 6.317404] usb 2-2: New USB device found, idVendor=046d, idProduct=c01b
[ 6.317462] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.317518] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 6.317569] usb 2-2: Manufacturer: Logitech
[ 6.543376] usb 6-2: new full speed USB device using uhci_hcd and address 2
[ 6.716827] usb 6-2: configuration #1 chosen from 1 choice
[ 6.719722] hub 6-2:1.0: USB hub found
[ 6.721625] hub 6-2:1.0: 3 ports detected
[ 6.726875] usb 6-2: New USB device found, idVendor=046d, idProduct=0b04
[ 6.726940] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.726999] usb 6-2: Product: Logitech BT Mini-Receiver
[ 6.727053] usb 6-2: Manufacturer: Logitech
[ 6.994617] usb 6-2.2: new full speed USB device using uhci_hcd and address 3
[ 7.138819] usb 6-2.2: configuration #1 chosen from 1 choice
[ 7.144935] usb 6-2.2: New USB device found, idVendor=046d, idProduct=c713
[ 7.144993] usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.145070] usb 6-2.2: Product: Logitech BT Mini-Receiver
[ 7.145123] usb 6-2.2: Manufacturer: Logitech
[ 7.145174] usb 6-2.2: SerialNumber: 0007617AC3F9
[ 7.211612] usb 6-2.3: new full speed USB device using uhci_hcd and address 4
[ 7.359357] usb 6-2.3: configuration #1 chosen from 1 choice
[ 7.364932] usb 6-2.3: New USB device found, idVendor=046d, idProduct=c714
[ 7.364934] usb 6-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.364937] usb 6-2.3: Product: Logitech BT Mini-Receiver
[ 7.364939] usb 6-2.3: Manufacturer: Logitech
[ 7.364940] usb 6-2.3: SerialNumber: 0007617AC3F9
[ 8.984747] input: Power Button (FF) as /class/input/input0
[ 9.006919] ACPI: Power Button (FF) [PWRF]
[ 9.007004] input: Power Button (CM) as /class/input/input1
[ 9.021113] ACPI: Power Button (CM) [VBTN]
[ 9.048989] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.049031] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 9.049071] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 9.060794] processor ACPI0007:00: registered as cooling_device0
[ 9.060845] processor ACPI0007:01: registered as cooling_device1
[ 9.065667] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.073608] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 9.073725] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.080203] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 9.080206] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 9.080270] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 9.080277] e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff]
[ 9.080284] e1000e 0000:00:19.0: PCI INT A disabled
[ 9.080290] e1000e: probe of 0000:00:19.0 failed with error -16
[ 9.080958] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 9.196488] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.204233] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 9.210127] input: Logitech Logitech BT Mini-Receiver as /class/input/input3
[ 9.219007] Driver 'sr' needs updating - please use bus_type methods
[ 9.257039] generic-usb 0003:046D:C713.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.2-2.2/input0
[ 9.258865] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.258870] Uniform CD-ROM driver Revision: 3.20
[ 9.258979] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 9.260082] usbcore: registered new interface driver usbhid
[ 9.260085] usbhid: v2.6:USB HID core driver
[ 9.360339] input: Logitech Logitech BT Mini-Receiver as /class/input/input4
[ 9.361821] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.362186] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A
[ 9.393684] logitech 0003:046D:C714.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.2-2.3/input0
[ 9.791132] Linux video capture interface: v2.00
[ 9.827980] i2c_algo_bit: exports duplicate symbol i2c_bit_add_numbered_bus (owned by kernel)
[ 9.838420] ivtv: Start initialization, version 1.4.0
[ 9.838493] ivtv0: Initializing card #0
[ 9.838495] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 9.838563] ivtv 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.892690] tveeprom 1-0050: Hauppauge model 32062, rev C199, serial# 8510288
[ 9.892694] tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
[ 9.892697] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[ 9.892699] tveeprom 1-0050: audio processor is MSP3445 (idx 12)
[ 9.892701] tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
[ 9.892704] tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
[ 9.892706] ivtv0: Autodetected Hauppauge WinTV PVR-250
[ 9.947760] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.947771] HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff]
[ 9.947776] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 9.947789] HDA Intel: probe of 0000:00:1b.0 failed with error -16
[ 9.985899] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 10.121484] msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
[ 10.121486] msp3400 1-0040: msp3400 supports radio, mode is autodetect and autoselect
[ 10.122792] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 10.122800] simple_tuner_attach: driver disabled by Kconfig
[ 10.123193] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 10.123227] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 10.123260] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 10.123293] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 10.123296] ivtv0: Initialized card #0: Hauppauge WinTV PVR-250
[ 10.123316] ivtv: End initialization
[ 12.984403] EXT3 FS on sda7, internal journal
[ 13.293069] kjournald starting. Commit interval 5 seconds
[ 13.293232] EXT3 FS on sda1, internal journal
[ 13.293240] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.334912] kjournald starting. Commit interval 5 seconds
[ 13.335067] EXT3 FS on sda8, internal journal
[ 13.335074] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.346061] kjournald starting. Commit interval 5 seconds
[ 13.346203] EXT3 FS on sda6, internal journal
[ 13.346210] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.363127] kjournald starting. Commit interval 5 seconds
[ 13.363274] EXT3 FS on sda5, internal journal
[ 13.363281] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.386583] kjournald starting. Commit interval 5 seconds
[ 13.386747] EXT3 FS on sda2, internal journal
[ 13.386754] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.411607] kjournald starting. Commit interval 5 seconds
[ 13.411738] EXT3 FS on sda3, internal journal
[ 13.411744] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.426394] kjournald starting. Commit interval 5 seconds
[ 13.426698] EXT3 FS on sdb1, internal journal
[ 13.426705] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.732391] Adding 1020088k swap on /dev/sda9. Priority:-1 extents:1 across:1020088k
[ 15.130376] platform microcode: firmware: requesting intel-ucode/06-0f-0d
[ 15.147907] platform microcode: firmware: requesting intel-ucode/06-0f-0d
[ 15.151183] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk> <peter.oruba@amd.com>
[ 15.357831] microcode: CPU0 updated from revision 0xa1 to 0xa3, date = 2007-08-13
[ 15.359162] microcode: CPU1 updated from revision 0xa1 to 0xa3, date = 2007-08-13
[ 15.382263] Microcode Update Driver: v2.00 removed.
[ 16.935369] RPC: Registered udp transport module.
[ 16.935373] RPC: Registered tcp transport module.
[ 17.620320] fuse init (API version 7.10)
[ 23.180051] ivtv 0000:02:00.0: firmware: requesting v4l-cx2341x-enc.fw
[ 23.381383] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 23.580158] ivtv0: Encoder revision: 0x02060039
[ 23.601314] tuner 1-0061: Tuner has no way to set tv freq
[ 23.666053] tuner 1-0061: Tuner has no way to set tv freq
[ 26.775435] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.775439] pci 0000:00:02.0: enabling bus mastering
[ 26.775443] pci 0000:00:02.0: setting latency timer to 64
[ 26.775508] pci 0000:00:02.0: irq 46 for MSI/MSI-X
[ 26.775657] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 26.788761] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining

Thanks,

jon


\
 
 \ /
  Last update: 2008-10-31 04:01    [W:0.136 / U:0.468 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site