Messages in this thread | | | Date | Tue, 28 Oct 2008 10:12:51 +0100 | From | Ivan Vecera <> | Subject | Re: r8169 MAC addresses broken |
| |
Simon Arlott napsal(a): > On 26/10/08 12:52, Krzysztof Halasa wrote: >> Jiri Slaby <jirislaby@gmail.com> writes: >> >>> However I may have a hw failure or some bug overwrote my eeprom, I see this >>> in current mmotm: >>> r8169 0000:06:00.0: PCI INT A disabled >>> r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded >>> r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >>> r8169 0000:06:00.0: setting latency timer to 64 >>> r8169: mac_version = 0x0c >>> r8169 0000:06:00.0: irq 43 for MSI/MSI-X >>> r8169: MAC address found in EEPROM: 00:00:00:00:00:00 >>> eth0: RTL8168b/8111b at 0xffffc200042b0000, 00:00:00:00:00:00, XID 38000000 >> I think we need drivers or maybe some tool to save contents of those >> little EEPROM / flash NVM configuration chips before it's too late. >> First the ICH* e1000e corruption and now GbE RTL. > > With the reverted patch my MAC addresses are still broken: Try full power-off (disconnect power supply/remove battery).
> > [ 1.527660] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.533421] r8169 0000:00:09.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 > [ 1.541743] r8169 0000:00:09.0: PCI: Disallowing DAC for device > [ 1.547799] r8169 0000:00:09.0: no PCI Express capability > [ 1.554519] eth0: RTL8169sc/8110sc at 0xbf6f8000, 00:00:00:00:25:c2, XID 18000000 IRQ 10 > > [ 1.563480] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.570525] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 > [ 1.576363] r8169 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 > [ 1.584597] r8169 0000:00:0b.0: PCI: Disallowing DAC for device > [ 1.590651] r8169 0000:00:0b.0: no PCI Express capability > [ 1.596659] eth1: RTL8169sc/8110sc at 0xbf6fc000, 00:00:00:00:25:c3, XID 18000000 IRQ 11 >
| |