[lkml]   [2008]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Linux 2.6.28-rc2 i/o error on /dev/ttyUSB0
I have gps unit connected via USB-serial (pl2303).
This does not work with 2.6.28-rc2

udev creates devices as usual, but /dev/ttyUSB0 fail.
cat /dev/ttyUSB0 gives i/o errors, for example.

gpsd try several times, and then fall back on opening
in read-only mode. This works, but gpsd doesn't actually
get any data at all from the unit.

The pc is a core2duo laptop, using a 64-bit smp kernel.

2.6.27 is fine. I skipped 2.6.28-rc1 due to known breakage.
I can test it if that might help.

Helge Hafting

 \ /
  Last update: 2008-10-28 12:29    [W:0.129 / U:6.688 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site