lkml.org 
[lkml]   [2008]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: default IRQ affinity change in v2.6.27 (breaking several SMP PPC based systems)
Kumar Gala wrote:
>
> On Oct 24, 2008, at 10:17 AM, Chris Snook wrote:
>
>> Kumar Gala wrote:
>>> It appears the default IRQ affinity changes from being just cpu 0 to
>>> all cpu's. This breaks several PPC SMP systems in which only a
>>> single processor is allowed to be selected as the destination of the
>>> IRQ.
>>> What is the right answer in fixing this? Should we:
>>> cpumask_t irq_default_affinity = 1;
>>> instead of
>>> cpumask_t irq_default_affinity = CPU_MASK_ALL?
>>
>> On those systems, perhaps, but not universally. There's plenty of
>> hardware where the physical topology of the machine is abstracted away
>> from the OS, and you need to leave the mask wide open and let the APIC
>> figure out where to map the IRQs. Ideally, we should probably make
>> this decision based on the APIC, but if there's no PPC hardware that
>> uses this technique, then it would suffice to make this arch-specific.
>
>
> What did those systems do before this patch? Its one thing to expose a
> mask in the ability to change the default mask in
> /proc/irq/default_smp_affinity. Its another (and a regression in my
> opinion) to change the mask value itself.

Before the patch they took an extremely long time to boot if they had storage
attached to each node of a multi-chassis system, performed poorly unless special
irqbalance hackery or manual assignment was used, and imposed artificial
restrictions on the granularity of hardware partitioning to ensure that CPU 0
would always be a CPU that could service all interrupts necessary to boot the OS.

> As for making it ARCH specific, that doesn't really help since not all
> PPC hw has the limitation I spoke of. Not even all MPIC (in our cases)
> have the limitation.

What did those systems do before this patch? :)

Making it arch-specific is an extremely simple way to solve your problem without
making trouble for the people who wanted this patch in the first place. If PPC
needs further refinement to handle particular *PICs, you can implement that
without touching any arch-generic code.

-- Chris


\
 
 \ /
  Last update: 2008-10-24 18:11    [W:0.118 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site