[lkml]   [2008]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/1] Ath5k: add AP mode
On 10/21/2008 08:08 PM, Nick Kossifidis wrote:
> 2008/10/12 Jiri Slaby <>:
>> Add support for AP mode. This involves:
>> - enablement in ath5k_beacon_config -- initialize beacon timer
>> - add AP to the supported modes in ath5k_add_interface
>> - handle beacon change even for AP in ath5k_config_interface
>> - remove useless test for IBSS in ath5k_beacon_update
>> Note that it doesn't enable the AP mode for the driver. It must
>> be enabled by NL80211_IFTYPE_AP bit added to interface_modes.
> a) It won't work without the following as Gregory pointed out

This was intentional, see the changelog.

> b) For some reason it only works with 5212/5213 cards, i tested it on
> a 5413 and an 2425 and it didn't work (hostapd seems to hang).

I've ordered 5413 ;), will come with updates.

Thanks for testing, Nick.

 \ /
  Last update: 2008-10-22 16:23    [W:0.048 / U:27.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site