Messages in this thread | | | Date | Thu, 16 Oct 2008 18:07:39 +0200 | From | "Hillier, Gernot" <> | Subject | Re: e1000e: sporadic "hardware error"s with Intel 82563EB on Supermicro X7DB3 |
| |
Hi there!
Graham, David wrote: > It would help if you could provide a little more information. Could you > provide (for one of each of the two configurations that you have - one > with the IPMI card, one without): > > lspci -t > lspci -vvv -xxxx > ethtool -e eth0
Ok, it turned out that we still can reproduce the problem - even after the firmware upgrade. So I collected the information you requested from two machines:
- BVSIM3 is the one with the IPMI card. - BVSIM5 the one without the IPMI card.
As the output from the commands you requested is rather large, I uploaded it to the following URLs instead posting it to the list, hope that's ok:
http://www.hillier.de/bvsim5-ethtool-e.txt http://www.hillier.de/bvsim5-lspci-t.txt http://www.hillier.de/bvsim5-lspci-vvv-xxxx.txt http://www.hillier.de/bvsim3-ethtool-e.txt http://www.hillier.de/bvsim3-lspci-t.txt http://www.hillier.de/bvsim3-lspci-vvv-xxxx.txt
All commands were run in the error case, i.e. after e1000e said "Hardware error".
> BIOS "IPMI" menus (I know you already gave us one, but both > would be good)
BVSIM3 shows the IPMI menu I already provided BVSIM5 shows no IPMI menu
Thanks in advance!
-- With kind regards, Gernot Hillier Siemens AG, CT SE 2, Corporate Competence Center Embedded Linux
| |