lkml.org 
[lkml]   [2008]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Enable console on PCI serial devices
From
Date
On Tue, 2008-10-14 at 17:30 -0600, n0ano@n0ano.com wrote:
> - uart[8250],io,<addr>[,options]
> - uart[8250],mmio,<addr>[,options]
> + uart[8250],io,<addr>[,options[,clk]]
> + uart[8250],mmio,<addr>[,options[,clk]]
> Start an early, polled-mode console on the 8250/16550
> UART at the specified I/O port or MMIO address,
> switching to the matching ttyS device later. The
> - options are the same as for ttyS, above.
> + "options" are the same as for ttyS, above. "clk"
> + is the crystal frequency which defaults to 1843200
> + (115200 * 16) but some hardware uses different
> + crystal.

Shouldn't the earlycon entry be updated for the "clk" stuff too?


Paul Bolle



\
 
 \ /
  Last update: 2008-10-15 11:15    [W:0.102 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site