lkml.org 
[lkml]   [2008]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 09/18] ide: add ->set_irq method
Date
On Wednesday 15 October 2008, Sergei Shtylyov wrote:
> Hello.
>
> Bartlomiej Zolnierkiewicz wrote:
>
> > Add ->set_irq method for setting nIEN bit of ATA Device Control
> > register and use it instead of ide_set_irq().
> >
> > While at it:
> >
> > * Use ->set_irq in init_irq() and do_reset1().
> >
> > * Don't use HWIF() macro in ide_check_pm_state().
> >
> > There should be no functional changes caused by this patch.
> >
> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> >
> [...]
> > Index: b/drivers/ide/ide-iops.c
> > ===================================================================
> > --- a/drivers/ide/ide-iops.c
> > +++ b/drivers/ide/ide-iops.c
> > @@ -135,6 +135,23 @@ static u8 ide_read_sff_dma_status(ide_hw
> > return inb(hwif->dma_base + ATA_DMA_STATUS);
> > }
> >
> > +static void ide_set_irq(ide_hwif_t *hwif, int on)
> > +{
> > + u8 ctl = ATA_DEVCTL_OBS;
> > +
> > + if (on == 4) { /* hack for SRST */
> > + ctl |= 4;
> > + on &= ~4;
> > + }
> > +
> > + ctl |= on ? 0 : 2;
> > +
> > + if (hwif->host_flags & IDE_HFLAG_MMIO)
> > + writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
> > + else
> > + outb(ctl, hwif->io_ports.ctl_addr);
> > +}
> > +
> > static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
> > {
> > ide_hwif_t *hwif = drive->hwif;
> >
> [...]
> > @@ -1162,16 +1180,15 @@ static ide_startstop_t do_reset1 (ide_dr
> > * immediate interrupt due to the edge transition it produces.
> > * This single interrupt gives us a "fast poll" for drives that
> > * recover from reset very quickly, saving us the first 50ms wait time.
> > + *
> > + * TODO: add ->softreset method and stop abusing ->set_irq
> > */
> > /* set SRST and nIEN */
> > - hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr);
> > + hwif->set_irq(hwif, 4);
> > /* more than enough time */
> > udelay(10);
>
> It seems to me that the whole idea of having 2 separate methods for
> writing the single device control register is a wrong idea.
> I'm suggesting to convert set_irq() method to write_devctrl() method and
> pass the register value directly to it.

Makes sense. Care to make a patch?


\
 
 \ /
  Last update: 2008-10-15 21:53    [W:0.062 / U:1.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site