lkml.org 
[lkml]   [2008]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] 8250: Don't clobber spinlocks in 8250.
Don't clobber spinlocks in 8250.

In serial8250_isa_init_ports(), the port's lock is initialized. We
should not overwrite it. Only copy in the fields we need.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
---
drivers/serial/8250.c | 16 ++++++++++++++--
1 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index d3ca7d3..da65fea 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2699,12 +2699,24 @@ static struct uart_driver serial8250_reg = {
*/
int __init early_serial_setup(struct uart_port *port)
{
+ struct uart_port *p;
+
if (port->line >= ARRAY_SIZE(serial8250_ports))
return -ENODEV;

serial8250_isa_init_ports();
- serial8250_ports[port->line].port = *port;
- serial8250_ports[port->line].port.ops = &serial8250_pops;
+ p = &serial8250_ports[port->line].port;
+ p->iobase = port->iobase;
+ p->membase = port->membase;
+ p->irq = port->irq;
+ p->uartclk = port->uartclk;
+ p->fifosize = port->fifosize;
+ p->regshift = port->regshift;
+ p->iotype = port->iotype;
+ p->flags = port->flags;
+ p->mapbase = port->mapbase;
+ p->private_data = port->private_data;
+ p->ops = &serial8250_pops;
return 0;
}


\
 
 \ /
  Last update: 2008-10-15 18:53    [W:0.024 / U:4.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site