lkml.org 
[lkml]   [2008]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe:
    Can you explain to me what the error means?
    I got the kernel panic with the
    http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.27.tar.bz2

    <b>....
    Kernel panic - not syncing: No init found. Try passing init= option to
    kernel</b>

    I still got the error.

    Best regards,
    Yudha_HT

    2008/10/13, Yudha Harimantoro T <yudha.ht@gmail.com>:
    > This morning I run `make mrproper` in the kernel tree and rebuild. But
    > it make the kernel panic at 9 s, with the same error.
    >
    > Maybe I'll get the 2.6.27 from the kernel.org now.
    >
    > Thx,
    >
    > Yudha_HT
    >
    > 2008/10/11, Bill Davidsen <davidsen@tmr.com>:
    >> Yudha Harimantoro T wrote:
    >>> Date: Fri, 10 Oct 2008 16:41:36 -0400
    >>> From: Bill Davidsen
    >>>
    >>>
    >>>
    >>>> Yudha Harimantoro T wrote:
    >>>>
    >>>>> Hi all,
    >>>>> Yesterday I build kernel 2.6.26.6 and it's run well. Today I got
    >>>>> 2.6.27 patch and try to build it.
    >>>>>
    >>>>> I build with `make oldconfig` and answer any question with default
    >>>>> answer, I just press [enter].
    >>>>> I build with `make`. No error and all compiled.
    >>>>> Then I install with `make modules_install` and `make install`.
    >>>>>
    >>>>>
    >>>
    >>>
    >>>> I realize that this is a low-probability thought, but did you:
    >>>> - apply the patch against 2.6.26 NOT 2.6.26.6
    >>>>
    >>> Yup, I've did it.
    >>>
    >>>> - run make clean before applying the patch
    >>>>
    >>> I still need this for a pure 2.6.26? I'll try this.
    >>>
    >>>
    >>>>> After reboot the system I got 'kernel panic'.
    >>>>> This is the error picture :
    >>>>> http://www.ryht.co.cc/wordpress/wp-content/uploads/2008/10/pa101358.jpg
    >>>>> Is it a bugs?
    >>>>>
    >>>>> http://www.ryht.co.cc/wordpress/wp-content/uploads/2008/10/pa101353.jpg
    >>>>> [2.6.26.6 run well]
    >>>>>
    >>>
    >>>
    >>>> I keep configs in a separate place. I would first copy a 2.6.26 tree to
    >>>> a
    >>>> new directory (cp -rl linux-2.6.26 linux2.6.27) then be sure I had a
    >>>> clean copy with "make distclean" (or "make mrproper") and then apply the
    >>>> 2.6.27 patch. Then I would copy the 2.6.26 (or maybe 2.6.26.6) config to
    >>>> .config, and make the oldconfig.
    >>>> None of that is magic, it just keeps me from making common mistakes,
    >>>> lets
    >>>> me start with a clean 2.6.27, etc, etc.
    >>>> You mentioned oldconfig, but not starting back with a clean 2.6.26,
    >>>> which
    >>>> made me think of this.
    >>>>
    >>> Hm, I `cp /boot/config .config` in new kernel tree [2.6.27] for the
    >>> config. Do I make mistakes?
    >>>
    >>
    >> No, I was just noting that I try to start oldconfig with a known working
    >> config, to reduce the number of choices and possible errors. I wasn't
    >> sure if you did that, so I mentioned it.
    >>
    >> --
    >> Bill Davidsen <davidsen@tmr.com>
    >> "Woe unto the statesman who makes war without a reason that will still
    >> be valid when the war is over..." Otto von Bismark
    >>
    >>
    >>
    >


    \
     
     \ /
      Last update: 2008-10-13 10:31    [W:0.029 / U:30.268 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site