lkml.org 
[lkml]   [2008]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
Date
From
Subjects3c24xx nand: add command line partition table parsing support (resend)
Add mtd id and  command line partition table parsing support for
s3c24xx nand driver.

Signed-off-by: Conke Hu <conke.hu@gmail.com>
Signed-off-by: Linke Wang <linke.wang@gmail.com>
------------------
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c

index 556139e..db0d331 100644

--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -48,6 +48,8 @@
#include <asm/plat-s3c/regs-nand.h>
#include <asm/plat-s3c/nand.h>

+#define S3C_NAND_NAME_LEN 16
+
#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
static int hardware_ecc = 1;
#else
@@ -60,6 +62,9 @@ static int clock_stop = 1;
static const int clock_stop = 0;
#endif

+#ifdef CONFIG_MTD_PARTITIONS
+static const char *s3c_part_probes[] = {"cmdlinepart", NULL};
+#endif

/* new oob placement block for use with hardware ecc generation
*/
@@ -80,6 +85,7 @@ struct s3c2410_nand_mtd {

struct s3c2410_nand_set *set;
struct s3c2410_nand_info *info;
int scan_res;
+ char name[S3C_NAND_NAME_LEN];
};

enum s3c_cpu_type {
@@ -649,6 +655,15 @@ static int s3c2410_nand_add_partition(struct

s3c2410_nand_info *info,
struct s3c2410_nand_mtd *mtd,
struct s3c2410_nand_set *set)
{
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+ int nr_parts;
+ struct mtd_partition *partitions;
+
+ nr_parts = parse_mtd_partitions(&mtd->mtd, s3c_part_probes,
&partitions, 0);
+ if (nr_parts > 0 && partitions != NULL)
+ return add_mtd_partitions(&mtd->mtd, partitions, nr_parts);
+#endif
+
if (set == NULL)
return add_mtd_device(&mtd->mtd);

@@ -892,6 +907,9 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,

for (setno = 0; setno < nr_sets; setno++, nmtd++) {
pr_debug("initialising set %d (%p, info %p)\n", setno,
nmtd, info);
+ snprintf(nmtd->name, sizeof(nmtd->name), "s3c_nand%d", setno);
+ nmtd->mtd.name = nmtd->name;
+
s3c2410_nand_init_chip(info, nmtd, sets);

nmtd->scan_res = nand_scan_ident(&nmtd->mtd,


\
 
 \ /
  Last update: 2008-10-12 22:13    [W:0.053 / U:9.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site